Page 16 / 106
Scroll up to view Page 11 - 15
10
1 GETTING STARTED
DMS-CTC-20110713-0024 v1.0
1.2.5
Status LEDs
Introduction
On the front panel of your MediaAccess Gateway, you can find a number of status LEDs, indicating the state of the device.
Power LED
Ethernet LED
Upgrade
Power
Ethernet
USB
Wireless
Broadband
Internet
TV
WPS
Colour
State
Description
Green
Solid on
Power on, normal operation
Blinking
Bootloader active (during upgrade)
Red
Solid on
Power on, self-test failed, indicating device malfunction
Orange
Solid on
Bootloader selftest
Blinking
Bootloader active (during upgrade)
Off
The MediaAccess Gateway is powered off.
Colour
State
Description
Green
Solid on
Network device connected to the Ethernet switch.
Blinking
Network device connected to the Ethernet switch and sending/receiving
data.
Off
No Ethernet connection on your local network
Page 17 / 106
11
1 GETTING STARTED
DMS-CTC-20110713-0024 v1.0
USB LED
Wireless LED
Broadband LED
Internet LED
Colour
State
Description
Green
Solid on
Device(s) connected to the MediaAccess Gateway’s USB port
Off
No device connected to the MediaAccess Gateway’s USB port
Colour
State
Description
Green
Solid on
No wireless activity, WPA2-PSK or WPA-PSK encryption
Blinking
Wireless activity, WPA2-PSK or WPA-PSK encryption
Orange
Solid on
No wireless activity, WEP encryption
Blinking
Wireless activity, WEP encryption
Red
Solid on
No wireless activity, no security
Blinking
Wireless activity, no security
Red/green
Toggling
Wireless client registration phase
Off
Wireless access point disabled
Colour
State
Description
Green
Solid on
DSL line synchronised
Blinking
Trying to detect carrier signal or pending DSL line synchronisation
Off
MediaAccess Gateway powered off.
Colour
State
Description
Green
Solid on
Connected to the Internet, no activity
Blinking
Connected to the Internet, sending/receiving data
Red
Solid on
Failed to setup the Internet connection
Off
No Internet connection
Page 18 / 106
12
1 GETTING STARTED
DMS-CTC-20110713-0024 v1.0
TV LED
Upgrade LED
WPS LED
For more information about WPS, see
“5.1 Connecting Your Wireless Client via WPS” on page 40
.
Colour
State
Description
Green
Solid on
Set-Top Box (STB) connected to the MediaAccess Gateway
Blinking
Unknown STB connected to the MediaAccess Gateway
Off
No STB connected to the MediaAccess Gateway
Colour
State
Description
Blue
Solid on
Software upgrade ongoing
Off
No software upgrade ongoing
Do not power off your MediaAccess Gateway or disconnect any cables as long as the
Upgrade
LED is on.
Interrupting the upgrade procedure may damage your MediaAccess Gateway.
Colour
State
Description
Green
Solid On
Client successfully registered via WPS
Orange
Blinking
WPS registration ongoing
Red
Blinking
Error occurred
Page 19 / 106
13
1 GETTING STARTED
DMS-CTC-20110713-0024 v1.0
1.3
Preparing for the Installation
DSL service requirements
Make sure that:
Your service provider activated the DSL service on your telephone line by your service provider.
You have the installation information (for example, user name, password, service profile,...) provided by your service
provider at hand.
Local connection requirements
Wireless connection
If you want to connect your computer using a wireless connection, your computer must be equipped with a WiFi-certified
wireless client adapter.
Wired connection
If you want to connect a computer using a wired connection, your computer must be equipped with an Ethernet Network
Interface Card (NIC).
Start with the installation
You are now ready to start with the installation of your MediaAccess Gateway.
Page 20 / 106
14
1 GETTING STARTED
DMS-CTC-20110713-0024 v1.0
19216811.live