Technicolor TD5130 Router Manual PDF (Setup & Configuration Guide)

Page 36 / 46 Scroll up to view Page 31 - 35

36

SETUP & USER GUIDE

DMS-CTC-20120508-0000 v1.0.

8

Home Network

The

Home Network

menu displays the network configuration of your Wireless Gateway, along with

interfaces and connected devices. This menu is divided into two sections:

Devices

and

Interfaces

.

To view the

Home Network

page, click

Home Network

on the main menu.

8.1

Devices

This page displays the devices connected on your network via the Wireless Gateway Ethernet ports. You

can do the following:

▪

View the device information, IP address and connection services

▪

Assign a public IP address to a device

To access the Devices page, click

Home Network

>

Devices

.

8.1.1

View or Modify Device Information

1

Click the device name. The device information is displayed on screen.

2

To modify the device information, click

Configure

on the upper right corner of the screen.

3

Type desired device name in

New Name

.

4

Select the device type in

Type

.

5

To assign a static IP address, check the

Always use the same IP address box

.

6

Click

Apply

to save changes.

Page 37 / 46

37

SETUP & USER GUIDE

DMS-CTC-20120508-0000 v1.0.

8.1.2

Assign Game or Application to Device

1

Click the device name. The device information is displayed on screen.

2

Click

Configure

on the upper-right corner of the screen.

3

On the

Connection Sharing

section, select the game or application on the table.

4

Click

Add

.

8.1.3

Remove a Shared Game or Application

1

Click the device name. The device information is displayed on screen.

2

Click

Configure

on the upper-right corner of the screen.

3

On the

Connection Sharing

section, click the corresponding

Unassign

button of to remove the shared

game or application.

8.1.4

Assign a Public IP Address to Device

The Assign Public IP page allows you to assign the public IP address of your Internet connection to a

specific device on your local network.

1

Cick Home Network > Devices.

2

Click the Assign the public IP address of a connection to a device shortcut. The Assign Public IP

screen appears.

3

Click

Edit

.

4

On Device, select the network device that you want to assign the public IP address.

5

Click

Apply

.

Or, to remove the assigned IP address from a network device, click

Unassign

.

Page 38 / 46

38

SETUP & USER GUIDE

DMS-CTC-20120508-0000 v1.0.

8.2

Interfaces

The

Interfaces

page allows you to configure the network device TCP/IP settings such as IP address

subnet mask, assign a DHCP server, and configure the wireless network security settings.

To view the Interfaces page, click

Home

Network

>

Interfaces

.

8.2.1

Local Network Interface

Click

Home Network > Interfaces >

LocalNetwork

to open the Local Network page.

This page displays the interface information including the TCP/IP configuration, IP Addresses, DHCP

pool. To modify the settings, click

Configure

on the upper-right corner of the screen.

To use a DHCP Server, check the

Use

DHCP Server

box, then click

Apply

.

To Add an IP Address

1

On the IP Addresses table, type the IP address you want to add on the first box.

2

Type the subnet mask on the second box.

3

Click

Add

.

To Modify the IP Address

1

On the IP Addresses table, click the corresponding

Edit

button of the IP address you want to modify.

2

Modify the IP address (first box) and the subnet mask (second box).

3

Click

Apply

to save changes.

Page 39 / 46

39

SETUP & USER GUIDE

DMS-CTC-20120508-0000 v1.0.

To Modify the DHCP Pool

1

Click the

Edit

button of the pool you want to modify. The LAN_Private screen appears.



Interface

— Displays the current network interface.



Start Address

— Type the starting address of the DHCP pool.



End Address

— Type the ending address of the DHCP pool.



Subnet Mask

— Type the subnet mask.



Gateway

— Type the gateway.



Primary DNS

— Type the primary DNS.



Secondary DNS

— Type the secondary DNS.



Always give same address to DHCP clients

— Check to always give the same address for all DHCP

clients. Otherwise, remove the check.

2

When done, click

Apply

.

8.2.2

Wireless Access Point

Click

Home Network > Interfaces >

WLAN

to open the Wireless Access Point page.

This page displays the information of your wireless network. To view the advanced settings, click

Details

on the upper-right corner of the screen.

Page 40 / 46

40

SETUP & USER GUIDE

DMS-CTC-20120508-0000 v1.0.

To Configure the Wireless Network

1

Click

Configure

on the upper-right corner of the screen.

2

Enter or take note of the following information:



Interface Enabled

— Check to enable the wireless access point.



Physical Address

— Displays the MAC address of the wireless device.



Network Name (SSID)

— Enter desired wireless network name. This is the name shown to other

wireless devices to connect to your network.



Actual Speed

— Displays the network speed



Band

— Displays the channel band.



Channel Selection

— Select the automatic or manual channel selection.



Region

— Displays your current region.



Channel

— If

Channel Selection

is set to manual, select the channel from the list.

3

If necessary, configure the security settings, see

"To Set up Security Settings"

on page 41 .

4

If necessary, set up MAC filter. See

"To Set up MAC Filter"

on page

42

.

5

Click

Apply

to save changes.

Rate

Popular Technicolor Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share