Page 16 / 68
Scroll up to view Page 11 - 15
8
1 GETTING STARTED
DMS-CTC-20130228-0000 v1.0
1.2.2 Top panel
WPS button (item A)
The
WPS
(
) button allows you to add new wireless clients to your local network in a swift and easy way, without the need
to enter any of your wireless settings (network name, wireless network key, encryption type).
For more information about WPS, see
“2.4.1 How to connect your wireless client via WPS” on page 18
.
Page 17 / 68
9
1 GETTING STARTED
DMS-CTC-20130228-0000 v1.0
1.2.3 Back panel
Overview
Reset button (item A)
The
Reset
button allows you to:
Restart the Gateway.
Restore the factory defaults of the Gateway.
For more information, see
“7.3 Gateway reset and restore options” on page 56
.
USB port (item B)
The USB (
) port allows you to power or charge a USB device.
Tel ports (item C)
The
Tel
(
) ports allows you to connect a traditional phone or DECT base station to your Gateway.
For more information, see
“2.5 How to connect your phone” on page 24
.
Ethernet switch (item D)
The Ethernet switch
(
)
allows you to connect an Ethernet device (for example, a computer) to your local network. For
more information, see
“2.3 Connect your wired devices” on page 16
.
All Ethernet ports on the Gateway are Gigabit Ethernet ports and have a maximum speed of 1 Gbps (Gigabit per second).
Each Ethernet port has two LEDs:.
LED
LED status
Description
Left LED
(Green)
Solid on
Gigabit Ethernet device connected.
Blinking
Gigabit Ethernet device connected and sending/receiving data.
Off
No Gigabit Ethernet device connected.
Right LED
(Amber)
Solid on
100Mbps/10Mbps device connected.
Blinking
100Mbps/10Mbps device connected and sending/receiving data.
Off
No 100Mbps/10Mbps device connected.
Page 18 / 68
10
1 GETTING STARTED
DMS-CTC-20130228-0000 v1.0
Cable port (item E)
The
Cable
port allows you to connect to your local coax network and the broadband network of your services provider.
Power inlet (item F)
The power inlet (
Power
) allows you to connect the power cord.
Page 19 / 68
11
1 GETTING STARTED
DMS-CTC-20130228-0000 v1.0
1.2.4 Bottom panel
Product label (item A)
The label on the bottom of the Gateway contains information about your Gateway, like:
Device information
Wireless security settings
Battery compartment (item B, optional)
When the power is down the Gateway will automatically switch to the rechargeable battery (if installed). This to guarantee
that the following functions will not be impacted:
The connected phones
All voice-related features.
A
B
Do not remove the battery, unless instructed by your service provider.
Page 20 / 68
12
1 GETTING STARTED
DMS-CTC-20130228-0000 v1.0
1.3 Preparing for the installation
Local connection requirements
Wireless connection
If you want to connect your computer using a wireless connection, your computer must be equipped with a WiFi-certified
wireless client adapter.
Wired connection
If you want to connect a computer using a wired connection, your computer must be equipped with an Ethernet Network
Interface Card (NIC).
Start with the installation
You are now ready to start with the installation of your Gateway, proceed with
“2 Setup” on page 13
.
19216811.live