Cautions

This router’s design and manufacturer has your safety in mind. In order to safely and

effectively use this router, please read the following before usage.

Usage Cautions

The user should not modify this router. The environmental temperature should be within

+5 ~ +35 degrees Celsius.

Power

The rou

ter’s power voltage is DC

12V 1.5A.

When using this router, please connect the supplied AC adapter or AC adapter cable to

the router’s power jack. When placing the

adapter ca

ble, make sure it can’

t get damaged

or be subject to pressure. To reduce the risk of electric shock, unplug the adapter first

before cleaning it. Never connect the adapter to the router in a humid or dusty area. Do

not replace the adapter or cable’s wire

or connector.

Repair

If the router has a problem, you should take it to an appointed repair center and let the

specialists do the repair. Never repair the router yourself, you might damage the router

or endanger yourself.

Disposing of the Router

When you dispose of the router, be sure to dispose it appropriately. Some countries may

regulate disposal of an electrical device, please consult with your local authority.

Others

When using this router, please do not let it come into contact with water or other liquids.

If water is accidentally spilled on the router, please use a dry cloth to absorb the spillage.

Electronic products are vulnerable, when using please avoid shaking or hitting the router,

and do not press the buttons too hard.



Do not let the router come into contact with water or other liquid.



Do not disassemble, repair or change the design of the router; any damage done

will not be included in the repair policy.



Avoid hitting the router with a hard object, avoid shaking the router and stay

away from magnetic fields.



If during electrostatic discharge or a strong electromagnetic field the product will

malfunction, unplug the power cable. The product will return to normal

performance the next time it is powered on.

Product Layout

Port

Description

Power connector

Connect the 12V DC adapter to this port

USB Port

Connect a USB device to this port

LAN (Yellow)

Connect your PCs or network devices to these ports

ADSL (Grey)

Connect your ADSL cable to this port

Backlabel and Network Details Folder

The Network Details Folder describes the IP address, login details, network name,

security code and OPS button functionality.

Button

Description

OPS BUTTON

Press 0-5 seconds for OPS mode

Press 15 Seconds to reset the router to factory defaults.

LED Definition

As shown from the top to the bottom.

Port

Description

Power (Red)

Shows the device is turned on.

DSL (Green)

Shows the DSL signal is synchronized.

Internet (Blue)

Shows the Internet connection is active.

LAN (Blue)

Shows the cable is connected.

LAN (Blue)

Shows the cable is connected.

LAN (Blue)

Shows the cable is connected.

LAN (Blue)

Shows the cable is connected.

2.4GHz (Blue)

Shows 2.4GHz WiFi activity.

5GHz (Blue)

Shows 5GHz WiFi activity.

OPS (White)

Shows OPS activity.

Network + System Requirements

To begin using the router, make sure you meet the following as minimum requirements:



PC/Notebook.



Operating System

–

Microsoft Windows XP/VISTA/7 or Mac OSX



1 Free Ethernet port.



WiFi card/USB dongle (802.11 a/b/g/n)

–

optional.



PC with a Web-Browser (Internet Explorer, Safari, Firefox, Opera)



Ethernet compatible CAT5e cables.

Setup your Router

You can place the router on a desk or other flat surface, or you can mount it on a wall.

For optimal performance, place your router in the center of your home (or your office) in

a location that is away from any potential source of interference, such as a metal wall or

microwave oven. This location must be close to a power connection and your ADSL

connection.

Connect the supplied power-adapter to the power inlet port and connect it to a wall

outlet. Switch the router on by flipping the switch on the back of the device. The router

automatically enters the self-test phase. During self-test phase, the Power LED will be lit

continuously to indicate that this product is in normal operation.