Page 6 / 60 Scroll up to view Page 1 - 5
6
3 Product Layout
Port
Description
WAN
Connect the cable from you ADSL/Cable modem to this
port
LAN
Connect the cable from your PC’s or network devices
to this port
Power connector
Blinks on traffic for specific LAN PORT
Page 7 / 60
7
Backlabel
The backlabel describes the corresponding LED indications and port functionality
LED
Description
POWER
Lights up when powered ON. Blinks on TEST/RESET
WLAN
Lights up in Blue when WLAN is enabled. Blinks on traffic
LINK/ACTIVY
Blinks on traffic for specific LAN PORT
WPS BUTTON
Press 2 seconds for WPS mode
Press 10 seconds to reset the router
Press 15 Seconds to reset the router to factory defaults.
Page 8 / 60
8
4 Network + System Requirements
To begin using the WL-303/WL-306/WL-312, make sure you meet the following
as minimum requirements:
PC/Notebook.
Operating System – Microsoft Windows XP/2000/VISTA
1 Free Ethernet port.
WiFi card/USB dongle (802.11 b/g/n) – optional.
External xDSL (ADSL) or Cable modem with an Ethernet port (RJ-45).
PC with a Web-Browser (Internet Explorer, Safari, Firefox, Opera)
Ethernet compatible CAT5 cables.
5 WL-303/WL-306/WL-312 Placement
You can place WL-303/WL-306/WL-312 on a desk or other flat surface, or you
can mount it on a wall. For optimal performance, place your Wireless Broadband
Router in the center of your office (or your home) in a location that is away from
any potential source of interference, such as a metal wall or microwave oven.
This location must be close to a power connection and your ADSL/Cable modem.
Page 9 / 60
9
6 Setup LAN, WAN
WAN connection:
LAN connection:
Page 10 / 60
10
7 PC Network Adapter setup (
Windows XP
)
Enter [Start Menu]
°
select [Control panel]
°
select [Network].
Select [Local Area Connection]) icon=>select [properties]

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top