1. Home
    2. /
  2. Manuals
    3. /
  3. Sierra Wireless
    4. /
  4. SWAC802
    5. /
  5. 21
Page 101 / 174 Scroll up to view Page 96 - 100
Settings
93
Settings
Section 5I
GPS Settings
²
Setting the GPS Mode (page 93)
²
Setting the GPS Fix Rate (page 94)
²
Using Metric Units (page 94)
²
Changing Your Mapping Service (page 94)
²
Performance Setting (GPS) (page 94)
²
Accuracy (page 95)
Basic GPS settings can be changed in the GPS Information and Settings window. (See “GPS
Information and Settings” on page 42.)
Additional settings are available at
Advanced Settings > WAN > GPS
.
Setting the GPS Mode
GPS mode determines whether the location fix is done:
●
Once (“one-time”), or
●
Periodically (“continuous”) — used, for example, for turn-by-turn (TBT) navigation applications.
To set the GPS mode:
1.
Make sure you’re logged in to the home page.
2.
Click
Advanced Settings >
WAN > GPS
.
3.
Select the
Enable GPS
check box if it is not selected.
4.
Select one of the following:
±
One-time
— A single fix is used. Use this option if you’ll be using your device at the same
location.
±
Continuous
— Fixes are obtained on a regular basis; also known as auto-tracking. Useful
for turn-by-turn (TBT) navigation applications, such as driving directions.
Tip:
If you want to get a fix immediately, click
Get fix now
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 102 / 174
94
Settings
Setting the GPS Fix Rate
The GPS fix rate determines how often GPS fixes are obtained. This option is available only if the fix
mode (
GPS Mode
) is set to
Continuous
.
1.
Log in to the home page.
2.
Click
Advanced Settings > WAN > GPS
.
3.
Make sure
GPS Mode
is set to
Continuous
.
4.
In the
Fix Rate
field, enter a number of seconds between 1 and 999. (The smaller the number,
the more up-to-date the location tracking will be, at the cost of shorter battery life of the device.)
Using Metric Units
To use metric units in the display of location information (for example, speed and altitude):
1.
Make sure you’re logged in to the home page.
2.
Click the GPS icon
on the left side of the home page.
3.
In the GPS Information and Settings window, select the
Metric units
check box.
Changing Your Mapping Service
To change the mapping service (for example, Google Maps or MapQuest) that displays the GPS
results (in a separate browser window):
1.
Make sure you’re logged in to the home page.
2.
Click the GPS icon
on the left side of the home page.
3.
Click a service in the
Mapping service
list in the GPS Information and Settings window.
Performance Setting (GPS)
The performance setting determines the amount of time the device waits for a satellite to be
discovered when obtaining GPS information.
1.
Log in to the home page.
2.
Click
Advanced Settings > WAN > GPS
.
3.
In the
Performance Value
section, select one of the following:
±
Automatic
— The device automatically determines the most appropriate setting to use.
±
Manual
— In the input field, enter the number of seconds the device should wait for a satellite to
be discovered. If this time is exceeded, an error is reported.
Downloaded from
www.Manualslib.com
manuals search engine
Page 103 / 174
Settings
95
Settings
Accuracy
The accuracy setting determines how accurate the location information is.
1.
Log in to the home page.
2.
Click
Advanced Settings > WAN > GPS
.
3.
In the
Accuracy
section, select one of the following:
±
Automatic
— The device automatically determines the most appropriate setting to use.
±
Manual
— In the input field, enter the number of meters to which the data must be accurate.
Note:
If the value is very small (that is, very high accuracy), the fix may fail.
Downloaded from
www.Manualslib.com
manuals search engine
Page 104 / 174
96
Settings
Section 5J
Configuring the Router Tab
²
Basic Panel (page 96)
²
LAN Panel (page 97)
²
Port Forward Panel (page 101)
²
Port Trigger Panel (page 103)
²
DMZ Panel (page 104)
²
Resetting the Software to Default Settings (page 105)
1.
Log in to the home page.
2.
Click
Advanced Settings
(
).
3.
Click
Router
.
4.
Depending on the settings you want to configure, click one of the panels:
±
Basic
. (See “Basic Panel” on page 96.)
±
LAN
. (See “LAN Panel” on page 97.)
±
Port Forward
— Port forwarding lets you forward incoming traffic to specific ports and devices
(per their local IP address) on your network. (See “Port Forward Panel” on page 101.)
±
Port Trigger
— You can set the device to monitor outgoing data on specific port numbers
(trigger ports). (See “Port Trigger Panel” on page 103.)
±
DMZ
— You can select one computer to receive all unsolicited incoming connections. (See
“DMZ Panel” on page 104.)
Basic Panel
To access this panel:
1.
Log in to the home page.
2.
Click
Advanced Settings
(
).
3.
Click
Router > Basic
.
From this window, you can enable or disable these features, and perform these actions:
●
USB Tethered Networking
— To prevent an unauthorized user from using the device through the
micro-USB cable, set this field to
Disable
. Users will be able to connect only through Wi-Fi and only
after they provide the correct Wi-Fi password (if Wi-Fi security is enabled).
This setting does not affect the ability to charge the Overdrive Pro 3G/4G Mobile Hotspot through
the micro-USB cable.
●
Port Forwarding
— Port forwarding lets you forward incoming traffic to specific ports and devices
(per their local IP address) on your network. (See “Port Forward Panel” on page 101.)
Downloaded from
www.Manualslib.com
manuals search engine
Page 105 / 174
Settings
97
Settings
●
Port Triggering
— You can set the device to monitor outgoing data on specific port numbers
(trigger ports). (See “Port Trigger Panel” on page 103.)
●
DMZ
— You can select one computer to receive all unsolicited incoming connections. (See
“DMZ Panel” on page 104.)
●
UPnP
(universal plug and play). (See “UPnP (Universal Plug and Play)” below.)
●
SPI
(stateful packet inspection). (See “SPI (Stateful Packet Inspection)” below.)
●
Router Settings Reset
. (See “Resetting the Software to Default Settings (Through the Browser
Interface)” on page 107.)
UPnP (Universal Plug and Play)
UPnP provides simple and robust connectivity among consumer electronics, intelligent
appliances, and mobile devices from many different vendors. (For more information, see
www.upnp.org
.)
Enabling UPnP
Before you can use UPnP, you must enable it.
1.
Log in to the home page.
2.
Click
Advanced Settings > Router > Basic
.
3.
Next to
UPnP
, select
Enable
.
SPI (Stateful Packet Inspection)
SPI, also known as “dynamic packet filtering,” helps to prevent cyberattacks by validating that the
traffic passing through a session conforms to the protocol used for this type of session. Packets
that are not conforming get rejected.
Enabling SPI
Before you can use SPI, you must enable it.
1.
Log in to the home page.
2.
Click
Advanced Settings > Router > Basic
.
3.
Next to
SPI
, select
Enable
.
LAN Panel
1.
Log in to the home page.
2.
Click
Advanced Settings
(
).
3.
Click
Router > LAN
.
Note:
If UPnP is enabled, there are potential security risks.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4 / 5 based on 1 vote.

Popular Sierra Wireless Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top