48
Local network configuration
Gigaset SE587 WLAN dsl / eng / A31008-N1083-L171-1-7619 / configure_network.fm / 12.12.2007
Schablone 2004_08_26
Obtaining an IP address automatically
If the DHCP server of your router/access point is active and the PC is to obtain its IP
address automatically, the
Obtain an IP address automatically
and
Obtain DNS
server address automatically
options must be activated.
ì
Check whether these options are selected and mark them if necessary.
ì
Click
OK
and close the following windows with
OK
to save your network
configuration.
Assigning an IP address statically
If the DHCP server of your router/access point is not active or the PC is to be assigned a
static IP address for other reasons, the following settings must be made:
ì
Select the option
Use the following IP address
.
ì
Enter the IP address for the PC in the
IP address
field.
ì
Enter the subnet mask to be used in your network in the
Subnet mask
field. You can
check these settings if necessary in the LAN configuration for your router/access
point.
ì
Enter the IP address for the router/access point in the
Default gateway
field.
ì
Select the option
Use the following DNS server addresses
.
ì
Enter the IP address for the router/access point in the
Preferred DNS server
field.
ì
Click
OK
and then
Close
to close all windows.
19216811.live