Page 141 / 185 Scroll up to view Page 136 - 140
143
Using the USB port
ì
Click the button to print a test page.
ì
Click
Finish
.
Note:
The printer server of the Giga762SX WLAN dsl does not work bi-directionally. It does
not evaluate any of the printer's response messages. For this reason please make sure
that your printer is also only configured uni-directionally. You can configure the rele-
vant settings for your printer by choosing
Start
Settings
Printers
.
Page 142 / 185
144
Using the USB port
Installing a standard TCP/IP printer port under Windows XP/2000
You can use the standard TCP/IP port driver available in this operating system. Make sure
that the Giga762SX WLAN dsl is connected and can be reached in the network. A printer
need not be connected to the USB port on your Giga762SX WLAN dsl at this point. The
following illustrations show installation on Windows XP. Installation on Windows 2000
is essentially the same.
ì
Click
Start
and in the window that opens click
Printers and Faxes
.
ì
In the window that opens, double-click
Add a printer
.
The wizard for installing a printer is opened.
Page 143 / 185
145
Using the USB port
ì
In the Add Printer Wizard, click
Next
.
The printer port you are installing will behave like an additional
parallel port on the PC. For this reason you must click the option
button next to
Local printer
in this window.
The
Automatically detect and install my Plug and Play printer
check box must not be selected.
ì
Click
Next
.
Page 144 / 185
146
Using the USB port
ì
Click the
Create a new port
option button.
ì
Then select
Standard TCP/IP Port
from the selection menu in the field next to this
option.
ì
Click
Next
.
ì
In the wizard for setting up a standard TCPI/IP port, click
Next
.
Page 145 / 185
147
Using the USB port
ì
In the
Printer Name or IP Address
input field, enter the IP address of the print server
(Giga762SX WLAN dsl): e.g. 192.168.2.1.
A copy of your entry is displayed in the second field.
ì
Double-click in the
Port Name
field and enter a name. This name will appear in the
list of printer ports. Name this port, for example,
Gigaset_port
.
ì
Click
Next
.
As Windows XP usually first looks for a network card when a printer port is installed,
the
Additional Port Information Required
window is displayed.
ì
Choose the option
Custom
and click
Settings
.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top