Sagem Fast 1704N Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of Sagem Fast 1704N router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 16
Quick Installation Guide
SAGEM F@st™ 1704
Page 2 / 16
1
SAGEM F@st
TM
1704
Sagem Communications SAS (hereafter referred to as Sagem Communications) thanks you for choosing the
range of SAGEM F@st
TM
1704 routers while hoping that it will provide you with full satisfaction.
SAGEM F@st
TM
1704 products adapt the ADSL function respectively on POTS (ITU G.992.1/3/5 -
Appendix A) and on ISDN (ITU G.992.1/3/5 - Appendix B).
SAGEM F@st
TM
1704 equipment include four ethernet interfaces (LAN1 to LAN4).
In addition, this router will provide you with access to all the services provided by your Internet Access
Provider, as shown in the diagram below.
CE
marking:
The CE marking certifies that the product complies with the essential requirements of the Directive
1999/5/EC concerning radio equipment and telecommunication equipment, and of Directives 2006/95/EC
concerning safety and 2004/108/EC concerning electromagnetic compatibility, defined by the European
Parliament and Council to reduce electromagnetic interferences and protect the health and safety of users.
The product named SAGEM F@st
TM
1704 can be operated in the European Union without restrictions indoor
but cannot be operated in France in the whole of the band until further notice.
The CE declaration of conformity can be viewed in the support section of the Sagem Communications site
www.sagem-communications.com, or it can be obtained from the following address:
Sagem Communications SAS
- Customer relations department
250, Route de l'Empereur
92500 RUEIL MALMAISON - FRANCE
Copyright © Sagem Communications SAS
All rights reserved.
SAGEM F@st
TM
is a registered trademark of Sagem Communications SAS.
Mac OS
®
is a registered trademark of Apple Computer, Inc.
Windows
®
is a registered trademark of Microsoft Corporation.
Page 3 / 16
2
SAGEM F@st
TM
1704
Contents
1.
Contents of the pack
......................................................................................
3
2.
Safety instructions
.........................................................................................
4
2.1.
Power supply source
.............................................................................................................
4
2.2.
Location conditions
................................................................................................................
4
2.3.
Maintenance
..........................................................................................................................
4
2.4.
Safety level
............................................................................................................................
4
3.
Connection
.....................................................................................................
5
3.1.
Connecting your router
..........................................................................................................
5
3.2.
Connecting additional telephones
..........................................................................................
5
4.
Installation from the CD-ROM
.......................................................................
6
4.1.
Installation by Wi-Fi interface
.................................................................................................
6
4.2.
Installation of the Ethernet port
..............................................................................................
8
4.3.
Installation of an additional computer
....................................................................................
8
5.
Router supervision
........................................................................................
9
5.1.
Status of the LEDs on the front panel
....................................................................................
9
5.2.
Router supervision
...............................................................................................................
10
6.
Advanced router configuration
...................................................................
12
7.
Troubleshooting
...........................................................................................
13
7.1.
Diagnostics tool
...................................................................................................................
13
7.2.
Restarting your router
..........................................................................................................
14
7.3.
Resetting factory configuration
............................................................................................
14
Page 4 / 16
3
SAGEM F@st
TM
1704
1.
Contents of the pack
Before you carry out the installation, make sure that the pack contains the following elements:
Item
Description
1
SAGEM F@st
TM
1704 router
2
Mains adapter
3
ADSL line cable used to connect your router to your telephone line
4
Ethernet cable used to connect your router to the Ethernet port of your computer
5
Quick Installation Guide
6
CD-ROM
7
Filter/Splitter used to connect one phone set and your router to your telephone line*
8
Microfilter used to connect another phone set to your telephone line*
9
802.11g USB Wi-Fi key*
*
Option depending on pack content requested
Page 5 / 16
4
SAGEM F@st
TM
1704
2.
Safety instructions
Power supply source
Do not cover the router’s mains adapter.
The router comes with its own mains adapter. Do not use another adapter.
This class II adapter does not need to be grounded (earthed). The connection to the electrical network
should comply with the indications given on the label.
Use a readily accessible mains outlet located near the router. The power supply cord is 2 m long.
Arrange the power supply cord in such a way as to avoid any accidental power cut to the router.
The router is designed to be connected to a GG- (ground-to-ground) or GN- (ground-to-neutral) type
power supply network.
The router is not designed to be connected to an electrical installation with IT type diagram (neutral
connected to earth through an impedance).
Protection against short-circuits and leaks between the phase, neutral and earth should be provided by
the building’s electrical installation. The power supply circuit for this equipment should be fitted with
16 A overcurrent protection and differential protection.
Connect the router to the mains via a readily accessible wall socket ensuring the electric cutting.
Location conditions
By choosing an appropriate location, you will preserve the longevity of the device. Ensure that the
selected location has the following characteristics:
Install and use the router inside a building.
The room temperature must not exceed 45°C.
The router can be placed on a desktop or fixed vertically in its wall mounting.
Do not expose the router to strong sunlight or place it near a substantial source of heat.
Do not place the router in an environment where it could be subjected to considerable steam
condensation.
Do not expose the router to splashes of water.
Do not cover the router’s casing.
Do not use the router or its peripherals for outdoor transmissions.
Maintenance
Never open the casing. This must be done only by qualified personnel approved by your supplier.
Do not use liquid or aerosol cleaning agents.
Safety level
Primary power source access
Bipolar AC mains socket
HPV (
Hazardous
P
rimary
V
oltage circuit)
DC power supply access
Miniature fixed connector (PWR)
SELV (
S
afety
E
xtra
L
ow
V
oltage)
RJ45 Ethernet access
(LAN1 to LAN4)
SELV
RJ11 line access (LINE)
TNV3 (
T
elecommunication
N
etwork
V
oltage level
3
circuit)

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top