19216811.live300M Wireless N Router
RNX-N300RT
User Manual
)
Note:
1)
Sometimes the connection cannot be disconnected although you specify a time
to Max Idle Time, since some applications is visiting the Internet continually in the
background.
2)
If you are a Cable user, please configure the Router following the above steps.
2.
How do I configure the Router to access the Internet by Ethernet users?
1)
Log in to the Router, click the “
Network
” menu on the left of your browser, and
click "
WAN
" submenu. On the
WAN
page, select “Dynamic IP” for "WAN
Connection Type", finish by clicking
Save
.
2)
Some ISPs require that you register the MAC Address of your adapter, which is
connected to your cable/DSL Modem during installation. If your ISP requires
MAC register, log in to the Router and click the "
Network
" menu link on the left of
your browser, and then click "
MAC Clone
" submenu link. On the "
MAC Clone
"
page, if your PC’s MAC address is proper MAC address, click the
Clone MAC
Address
button and your PC’s MAC address will fill in the "WAN MAC Address"
field. Or else, type the MAC Address into the "WAN MAC Address" field. The
format for the MAC Address is XX-XX-XX-XX-XX-XX. Then click the
Save
button.
It will take effect after rebooting.
Figure A-3
MAC Clone
3.
I want to use NetMeeting, what do I need to do?
1)
If you start NetMeeting as a sponsor, you don’t need to do anything with the
Router.
2)
If you start as a response, you need to configure Virtual Server or DMZ Host and
make sure the H323 ALG is enabled.
-115-