Page 101 / 127
Scroll up to view Page 96 - 100
300M Wireless N Router
RNX-N300RT
User Manual
Figure 4-69 No-ip.com DDNS Settings
To set up for DDNS, follow these instructions:
1.
Type the
User Name
for your DDNS account.
2.
Type the
Password
for your DDNS account.
3.
Type the
Domain Name
you received from dynamic DNS service provider.
4.
Click the
Login
button to log in the DDNS service.
Connection Status -
The status of the DDNS service connection is displayed here.
Click
Logout
to log out the DDNS service.
-100-
Page 102 / 127
300M Wireless N Router
RNX-N300RT
User Manual
4.15 System Tools
Figure 4-70 The System Tools menu
Choose menu “
System Tools
”, you can see the submenus under the main menu:
Time
Settings
,
Diagnostic
,
Firmware Upgrade
,
Factory Defaults, Backup & Restore,
Reboot, Password, System Log
and
Statistics.
Click any of them, and you will be able
to configure the corresponding function. The detailed explanations for each submenu are
provided below.
4.15.1 Time Settings
Choose menu “
System Tools
→
Time Settings
”, you can configure the time on the
following screen.
-101-
Page 103 / 127
300M Wireless N Router
RNX-N300RT
User Manual
Figure 4-71 Time settings
¾
Time Zone -
Select your local time zone from this pull down list.
¾
Date -
Enter your local date in MM/DD/YY into the right blanks.
¾
Time -
Enter your local time in HH/MM/SS into the right blanks.
¾
NTP Server Prior -
Enter the address for the NTP Server, then the Router will get the
time from the NTP Server preferentially. In addition, for some built-in common NTP
Servers, the Router can get time automatically once it connects the Internet.
To configure the system manually:
1.
Select your local time zone.
2.
Enter date and time in the right blanks.
3.
Click
Save
to save the configuration.
To configure the system automatically:
1.
Select your local time zone.
2.
Enter the IP address for
NTP Server Prior
.
3.
Click the
Get GMT
button to get system time from Internet if you have connected to
the Internet.
-102-
Page 104 / 127
300M Wireless N Router
RNX-N300RT
User Manual
)
Note:
1)
This setting will be used for some time-based functions such as firewall. You must
specify your time zone once you log in to the Router successfully, otherwise, these
functions will not take effect.
2)
The time will be lost if the Router is turned off.
3)
The Router will obtain GMT automatically from Internet if it has already connected to
Internet.
4.15.2 Diagnostic
Choose menu “
System Tools
→
Diagnostic
”, you can transact Ping or Traceroute
function to check connectivity of your network in the following screen.
Figure 4-72
Diagnostic Tools
¾
Diagnostic Tool -
Check the radio button to select one diagnostic too.
z
Ping -
This diagnostic tool troubleshoots connectivity, reachability, and name
resolution to a given host or gateway.
-103-
Page 105 / 127
300M Wireless N Router
RNX-N300RT
User Manual
z
Traceroute -
This diagnostic tool tests the performance of a connection.
)
Note:
You can use ping/traceroute to test both numeric IP address or domain name. If
pinging/tracerouting the IP address is successful, but pinging/tracerouting the domain
name is not, you might have a name resolution problem. In this case, ensure that the
domain name you are specifying can be resolved by using Domain Name System (DNS)
queries.
¾
IP Address/Domain Name -
Type the destination IP address (such as 202.108.22.5)
or Domain name (such as
).
¾
Pings Count -
The number of Ping packets for a Ping connection.
¾
Ping Packet Size -
The size of Ping packet.
¾
Ping Timeout -
Set the waiting time for the reply of each Ping packet. If there is no
reply in the specified time, the connection is overtime.
¾
Traceroute Max TM -
The max number of hops for a Traceroute connection.
Click
Start
to check the connectivity of the Internet.
The
Diagnostic Results
page displays the result of diagnosis.
If the result is similar to the following screen, the connectivity of the Internet is fine.
Figure 4-73
Diagnostic Results
eout” are used for
Ping
function. Option “Tracert Hops” are used for
Tracert
function.
)
Note:
Only one user can use this tool at one time. Options “Number of Pings”, “Ping Size” and
“Ping Tim
-104-
19216811.live