Page 16 / 52
Scroll up to view Page 11 - 15
Wireless Router
RNX-GX4
User’s Manual
16
h
To let your computer automatically receive IP address
Click select “
Obtain an IP address automatically”
and
“Obtain DNS
Server address automatically”
h
Click “
OK
” on
“Internet Protocol Version 4 (TCP/IPv4)”
window, then
Page 17 / 52
Wireless Router
RNX-GX4
User’s Manual
17
“OK”
again in the “
Local Area Connection Properties
” to finish this
process.
h
To set IP manually:
z
Select “
Use the following IP address
”; then type in:
±
IP address: 192.168.1.x (2<x<128; system default in IP
range 192.168.1.2~192.168.1.128)
±
Subnet mask: 225.225.225.0
±
z
Select “
Use the following DNS server addresses
”; then type in:
±
z
click “
OK
” in the “
Internet Protocol (TCP/IPv4) Properties
”
window
z
Click “
OK
” again in the “
Local Area Connection Properties
” to
finish this process.
IP address refers to a specific computer within the network. So when manually set your computers’ IP,
please remember to assign different IP address for different computer within the IP range.
Page 18 / 52
Wireless Router
RNX-GX4
User’s Manual
18
2.2 Connect test with the Router
After completing the above steps, you can use “Ping” command to test if your
computer has connected with your Router.
h
Start
Æ
Run
Æ
Type “cmd”
Æ
Click “OK”
h
h
If you see below message, this means the connection is set correctly.
Your PC/NB is now able to link to your Router.
h
If you see below message, this means the connection is not set
correctly. Please check your network connection and setup.
Page 19 / 52
Wireless Router
RNX-GX4
User’s Manual
19
When you are able to
ping
your Wireless Router from your PC/NB, this means your PC/NB is now
connecting to your Router. However, due to the complexity of a network environment, this does not
guarantee you are able to connect to the internet. Because your internet can be limited due to the
examples like:
1.
Modem Setup
2.
DSL (PPPoE) Static IP, Account name, and password setup
3.
Cable Static IP address setup
Please first follow below Setup, then confirm with your Internet Service Provider or Rosewill’s
Customer service on connection methods if you are still unable to connect to the internet.
2.3 Accessing RNX-GX4 with Web Browser
After finishing previous steps, you can type “
” in your Web
Browser’s address bar.
A window will pop up and ask you to enter Account name and password, the
default account name is “
admin
” and default password is “
guest
”.
19216811.live