Page 11 / 52
Scroll up to view Page 6 - 10
Wireless Router
RNX-GX4
User’s Manual
11
h
Pull down to select “
Internet Protocol (TCP/IP)
”
Æ
Select
“
Properties
”
h
To set your computer obtain IP automatically:
z
Select “
Obtain an IP address automatically
” and “
Obtain DNS
server address automatically
”; then click “
OK
” in the “
Internet
Protocol (TCP/IP) Properties
” window
Page 12 / 52
Wireless Router
RNX-GX4
User’s Manual
12
z
Click “
OK
” again in the “
Local Area Connection Properties
” to
finish this process.
h
To set IP manually:
z
Select “
Use the following IP address
”; then type in:
±
IP address: 192.168.1.x (2<x<128; system default in IP
range 192.168.1.2~192.168.1.128)
±
Subnet mask: 225.225.225.0
±
z
Select “
Use the following DNS server addresses
”; then type in:
±
z
click “
OK
” in the “
Internet Protocol (TCP/IP) Properties
”
window
Page 13 / 52
Wireless Router
RNX-GX4
User’s Manual
13
z
Click “
OK
” again in the “
Local Area Connection Properties
” to
finish this process.
IP address refers to a specific computer within the network. So when
manually set your computers’
IP
, please remember to assign different IP address for different computer within the IP range.
2.2 Setup for Window Vista
h
Start
Æ
Connect To
Page 14 / 52
Wireless Router
RNX-GX4
User’s Manual
14
h
Click on “
Open Network and Sharing Center
”
h
Select “
View status
”
Page 15 / 52
Wireless Router
RNX-GX4
User’s Manual
15
h
You should be a window pop up showing as “
Local Area Connection
Status
”
Æ
“Properties”
h
Select “
Internet Protocol Version 4 (TCP/IPv4)
”
Æ
“Properties”
19216811.live