1. Home
    2. /
  2. Manuals
    3. /
  3. Rosewill
    4. /
  4. RNX-GX4
    5. /
  5. 10
Page 46 / 52 Scroll up to view Page 41 - 45
Wireless Router
RNX-GX4
User’s Manual
46
other users on the internet to ping your PC/NB and gaining your IP
address
. Your PC/NB will appear “non-exist” in the internet.
Enabling WAN ping can make your network invisible from the outside user, but this may cause some
side-effect. For example, your Internet Service provider may need to be able to ping your network to
provide service. Please make sure enabling this will not discontinue the use of your network service
3.10 RNX-GX4’s Advance Usage - DDNS
Page
DDNS (Dynamic Domain Name Server) allows you to use domain name (instead of IP
address) to access Internet. You will need to register accounts for DDNS service at
DDNS service provider.
3.11 RNX-GX4’s Advance Usage - Routing
Page
In order for the client computers in different LAN segment communicate through
different routers and/or layer 3 switches under a complicated network environment,
Page 47 / 52
Wireless Router
RNX-GX4
User’s Manual
47
network administrator will need to assign routing table for routers. So the router will
know how to assign the clients for the ease of Network Management.
h
Destination Network or IP address:
Specify a certain destination
Network or IP address which static route forward to.
h
Subnet Mask:
Subnet Mask is used to define Network portion and
Host portion for an IP address.
h
Next-Hop IP address:
Using 802.11b and 802.11g mixed mode may
result in poor network performance. By enabling the 802.11 protection,
it will improve performance of 802.11g devices in your wireless
network.
3.12 RNX-GX4’s System Management Page
System Management provides you with
Password setting
,
Firmware upgrade
,
System restart
, and
Restore Default
options.
h
Restore Default:
By clicking the “Restore Default” button, your
RNX-GX4 will start restore back to factory default setting. Please do not
remove power when Router is resetting.
Page 48 / 52
Wireless Router
RNX-GX4
User’s Manual
48
3.12.1 Manually Restore Default
You can also manually reset RNX-GX4. In order to do this, you will need to follow
the below steps:
1.
Unplug the power of RNX-GX4
2.
Using a sharp item to press on the “
Default
” button at the back of the
RNX-GX4.
3.
Plug the power back to the “
PWR
” hole, while still pressing the “
Default
”
button.
4.
Release the “
Default
” button when you see the “
SYS
” LED (red LED)
start flashing.
5.
After releasing the Default button, please wait for 1 min for the reset to
take effect.
Password Setting:
RNX-GX4’s Username is default as “admin”. We strongly recommend you when first
login to the Web management page, please change the Password right away. If you lost your password,
you will need to restore back to Default to access back to RNX-GX4.
Firmware Upgrade:
It will take around 1 min to upgrade the router, please do not disconnect RNX-GX4
from the power to avoid possible damage while updating firmware.
Restore Default:
When restore back to default, all of your RNX-GX4’s previous setting will be lost.
Page 49 / 52
Wireless Router
RNX-GX4
User’s Manual
49
Appendix A – Product Specification
Standard
IEEE 802.3/3u, IEEE 802.11b/g
Device Management
Web-Based
Security
MAC Filter, Internet Access Control, DNS Filter, 64/128-bit WEP,
WPA(TKIP & AES) PSK (Personal Mode), WPA2(TKIP & AES) PSK
(Personal Mode), WPA & WPA2 PSK (Personal Mode)
Ports
1 x 10/100M WAN; 4 x 10/100M LAN
LEDs
SYS(PWR), WLAN, LAN (PC1-PC4),
Buttons
Default Button
Wireless Data Rates
Up to 54Mbps
Frequency Band
2.4GHz - 2.4835GHz
Antenna
2 dBi External Detachable Antenna X 2
Channels
11 Channels
Media Access Protocol
CSMA/CA with ACK
Modulation
OFDM, CCK
Transmitted Power
20dBm±2dBm
Receiver Sensitivity
54Mbps OFDM, 10% PER, -68dBm
48Mbps OFDM, 10% PER, -68dBm
36Mbps OFDM, 10% PER, -75dBm
24Mbps OFDM, 10% PER, -79dBm
18Mbps OFDM, 10% PER, -82dBm
12Mbps OFDM, 10% PER, -84dBm
11Mbps CCK, 8% PER, -82dBm
9Mbps OFDM, 10% PER, -87dBm
6Mbps OFDM, 10% PER, -88dBm
5.5Mbps CCK, 8% PER, -85dBm
2Mbps QPSK, 8% PER, -86dBm
1Mbps BPSK, 8% PER, -89dBm
Interface
Ethernet Port
Gateway support
FTP pass-through
VPN pass-through: PPTP / L2TP / IPSec pass-through
Power Input
External, 9V DC, 0.7A
Dimension
5.9” x 5.3” x 1.29”
Weight
0.46 lbs
Temperature
0°C ~50°C (32°F - 122°F)
Humidity
10% - 95%, Non-Condensing
Page 50 / 52
Wireless Router
RNX-GX4
User’s Manual
50
Appendix B – Troubleshooting
Q: What is the IP address of my RNX-GX4?
A: The default IP address is
192.168.1.1
.
However If you changed the IP address in “LAN IP address” of “LAN Setup” and
have forgot, you might get the IP address of RNX-GX4 by looking up the IP address
of the default gateway for your computer.
To do this in most Windows OS computers, click Start > Run, Type “
cmd
”, and then
enter “
ipconfig
”. The IP address of the Default Gateway should be the IP address of
the RNX-GX4 (This applies to most home network environments).
If your RNX-GX4 is a DHCP client, you can find your IP address from the DHCP
server. This information is only available from the DHCP server which allocates IP
addresses in your network. Find this information directly from the DHCP server or
contact your system administrator for more information. Or you will need to reset
your RNX-GX4 to default. This means your current settings will be lost.
Q: I don’t remember my password.
A: The default password is “
guest
”. If this doesn’t work, you have to reset your
RNX-GX4 using the “
Default
” button on the back of the RNX-GX4, Please see
Section 3.12.1, page 46
for detailed steps in resetting your RNX-GX4 manually.
Q: I cannot see or access the Login screen in the Web Management page.
A: Make sure you are using the correct IP address. You can also try below methods.
h
The default IP address is
192.168.1.1
.
h
If you changed the default IP address, please use your changed IP
address.
h
If you changed the IP address and have forgotten it, see the Question 1
on how to find the IP address of your RNX-GX4.
h
Reset the device to its factory defaults, and try to access the RNX-GX4
with the default IP address
h
If the problem continues, contact the network administrator or Rosewill.
Q: I cannot access the Internet.
A: Check the hardware connections, and make sure the LEDs are behaving as

Rate

4.5 / 5 based on 2 votes.

Popular Rosewill Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top