Planet ADN-4100 Router Manual PDF (Setup & Configuration Guide)

Page 16 / 101 Scroll up to view Page 11 - 15

3.2.1

Wizard

helps you to fast and accurately configure Internet connection and other

important

parameters.

The

following

sections

describe

these

various

configuration parameters.

When subscribing to a broadband service, be aware of the Internect connection

mode. The physical WAN device can be Ethernet, DSL, or both. Technical

information about properties of Internet connection is provided by your Internet

service provider (ISP). For example, your ISP should inform you whether you are

connected to the Internet using a static or dynamic IP address, and the protocol,

such as PPPoA or PPPoE, that you use to communicate on the Internet.

Step 1

Choose

Setup

>

Wizard

. The page as shown in the following figure

appears:

Step 2

Click

Setup Wizard

. The page as shown in the following figure

appears:

10

Page 17 / 101

There are four steps to configure the device. Click

Step 3

Set the time and date. Then, click

Step 4

Configure the Internet connection.

Select the protocol and the encapsulation mode. Set the VPI and the

VCI.

If the

Protocol

is set to

PPPoE

or

PPPoA

, the page as shown in the

following figure appears:

11

Page 18 / 101

You need to enter the user name and password for PPPoE or PPPoA

dialup.

If the

Protocol

is set to

Dynamic IP

, the page as shown in the

following figure appears:

12

Page 19 / 101

If the

Protocol

is set to

Static IP

, the page as shown in the following

figure appears:

You need to enter the information of the IP address, subnet mask, and

gateway.

If the

Protocol

is set to

Bridge

, the page as shown in the following

figure appears:

13

Page 20 / 101

If you click

Scan

, the system automatically searches the available

PVCs.

After the searching is complete, the result appears next to the

Scan

button.

14

Rate

Popular Planet Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share