Page 86 / 101
Scroll up to view Page 81 - 85
Click
Apply
to save the settings.
3.3.13
Logout
Choose
Advanced
>
Logout
. The page as shown in the following figure
appears:
Click
Logout
to log out of the configuration page.
3.4
Management
3.4.1
System
Choose
Management
>
System Management
. The
System
page as shown in
the following figure appears:
80
Page 87 / 101
In this page, you can restart the device, back up the current settings to a file,
update the backup file, and restore the factory default settings.
The following table describes the buttons in this page.
Button
Description
Reboot
Restart the device.
Backup Setting
Specify the path to back up the current configuration in
a configuration file on your computer. You can rename
the configuration file.
Update Settings
Click
Browse…
to select the configuration file of device
and click
Update Settings
to update the configuration
81
Page 88 / 101
Button
Description
of the device.
Restore Default
Setting
Reset the device to default settings.
Caution:
Do not turn off your device or press the Reset button when the procedure
is in progress.
3.4.2
Firmware Update
Choose
Management
>
Firmware Update
. The page as shown in the following
figure appears:
In this page, you can upgrade the firmware of the device. To update the firmware,
do as follows:
Step 1
Click
Browse…
to select the file.
Step 2
Select
Clear Config
.
82
Page 89 / 101
Step 3
Click
Update Firmware
to update the configuration file.
The device loads the file and reboots automatically.
Caution:
Do not turn off your device or press the Reset button when the procedure
is in progress.
3.4.3
Access Controls
Choose
Management
>
Access Controls
. The
ACCESS CONTROLS
page as
shown in the following figure appears:
This page contains
Account Password
,
Services
, and
IP Address
.
3.4.3.1 Account Password
In the
ACCESS CONTROLS
page, click
Account Password
. The page as
shown in the following figure appears:
83
Page 90 / 101
In this page, you can change the password and set the time for automatic logout.
You are recommended to change the default password to ensure the security of
your network. Ensure that you remember the new password or write it down and
keep it in a safe location for future reference. If you forget the password, you
need to reset the device to the factory default settings. In that case, all
configuration settings of the device are lost.
The following table describes the parameters in this page.
Field
Description
ACCOUNT PASSWORD
Username
Select a user name from the drop-down list to access
the device. You can select
admin
,
user
, or.
support
.
Current Password
Enter the password of the user.
New Password
Enter the new password.
Confirm Password
Enter the new password again for confirmation.
WEB IDLE TIME OUT SETTINGS
84
19216811.live