Page 81 / 101
Scroll up to view Page 76 - 80
Field
Description
Integrity Alogorithm
You can select from the drop-down list.
Diffie-Hellman Group
Key Exchange
You can select from the drop-down list.
Key Life Time
Enter the time of key life.
Use Interface
Select the use interface
This is a dynamic page. The displays are different (some options are shown and
hidden) when different types or connections are chosen.
In this page, set the parameters such as the IPSec connection name, tunnel
mode, and remote IPSec gateway address.
After finishing setting, click
Apply
to save the settings.
3.3.11
Routing
Choose
Advanced
>
Routing
. The page as shown in the following page
appears:
75
Page 82 / 101
This page contains the following function items: static route, default gateway, and
RIP settings.
3.3.11.1 Static Route
Choose
Advanced
>
Routing
and click
Static Route
. The page as shown in the
following figure appears:
This page displays the information of existing static routes. Click
Add
and the
page as shown in the following figure appears:
76
Page 83 / 101
The following table describes the parameters in this page.
Field
Description
Destination Network
Address
The destination IP address of the device.
Subnet Mask
The subnet mask of the destination IP address.
Use Gateway IP
Address
The gateway IP address of the device.
Use Interface
Select the interface of the static routing used by the
device from the drop-down list.
Note:
You can enter the gateway IP address of the device in the
Use Gateway IP
Address
field or set the
User Interface
, but cannot apply the two settings at
the same time.
Click
Apply
to save the settings.
3.3.11.2 Default Gateway
Choose
Advanced
>
Routing
and click
Default Gateway
. The page as shown in
the following figure appears:
77
Page 84 / 101
In this page, you can select
Enable Automatic Assigned Default Gateway
, or
enter the information in the
Use Gateway IP Address
and
Use Interface
fields.
Click
Apply
to save the settings.
3.3.11.3 RIP Settings
Choose
Advanced
>
Routing
and click
RIP
. The page as shown in the following
figure appears:
In this page, you can view the interfaces on your device that use RIP and the
version of the protocol used.
If you enable RIP, the device communicates with other devices using the routing
information protocol (RIP).
Click
Apply
to save the settings.
78
Page 85 / 101
3.3.12
Schedules
Choose
Advanced
>
Schedules
. The page as shown in the following figure
appears:
Click
Add
to add a schedule rule. The page as shown in the following figure
appears:
The following table describes the parameters in this page.
Field
Description
Name
Set the name of the schedule.
Day(s)
You can select one, more, or all of the seven days in a
week.
All Day – 24 hrs
If you select the check box, the rule applies throughout
the 24 hours of the day.
Start Time
Set the start time of the firewall.
End Time
Set the end time of the firewall.
79
19216811.live