Page 196 / 234
Scroll up to view Page 191 - 195
USER MANUAL
Peplink Balance Series
-196 / 234 -
Copyright © 2014 Peplink
This feature is located in
System>PepVPN Analyzer
. To utilize this feature, simply choose your profile
from the drop-down menu and click
Go!
25.5
CLI (Command Line Interface Support)
The serial console connector with the Peplink Balance 305, 380 HW rev 5, Peplink Balance 580, Peplink
Balance 710 HW rev 2, Peplink Balance 1350, Peplink Balance 2500, and MediaFast 200 and 500 is RJ-
45.To access the serial console port, prepare a RJ-45 to DB-9 console cable. Connect the RJ-45 end to
the unit's console port and the DB-9 end to a terminal's serial port. The port setting will be 115200,8N1.
The serial console connector with the Peplink Balance 305, 380 HW rev 1 to 4, Peplink Balance 710 HW
rev 1 is DB-9 male connector.
To access the serial console port, connect a null modem cable with a DB-9
connector on both ends to a terminal with the port setting of 115200,8N1.
Page 197 / 234
USER MANUAL
Peplink Balance Series
-197 / 234 -
Copyright © 2014 Peplink
26
Status
26.1
Device
System information is located at
Status>Device
.
Page 198 / 234
USER MANUAL
Peplink Balance Series
-198 / 234 -
Copyright © 2014 Peplink
System Information
Router Name
This is the name specified in the field Router Name located in
System>Admin Security
.
Model
This shows the model name and number of this device.
Hardware Revision
This shows the hardware version of this device.
Serial Number
This shows the serial number of this device.
Firmware
This shows the firmware version this device is currently running.
Uptime
This shows the length of time since the device has been rebooted.
System Time
This shows the current system time.
Diagnostic Report
The Download button is for exporting a diagnostic report file required for system
investigation.
The second table shows the MAC address of each LAN/WAN interface connected.
Important Note
If you encounter issues and would like to contact Peplink Support Team (
), please
download the diagnostic report file and attach it along with a description of your encountered issue.
In firmware 5.1 or before, Diagnostic Report file can be obtain at
System>Reboot
.
Page 199 / 234
USER MANUAL
Peplink Balance Series
-199 / 234 -
Copyright © 2014 Peplink
26.2
Active Sessions
Information on Active Sessions is at:
Status>Active Sessions>Overview
.
This screen displays the number of sessions initiated by each application. Click on each Service to obtain
additional information. This screen also indicates the number of sessions initiated by each WAN port.
Finally, you can see which clients are initiating the most sessions.
Page 200 / 234
USER MANUAL
Peplink Balance Series
-200 / 234 -
Copyright © 2014 Peplink
In addition, you can also perform a filtered search for specific sessions. You can filter by subnet, port,
protocol, and interface. To perform a search, navigate to:
Status>Active Sessions>Search
.
This Active Sessions section displays the active inbound / outbound sessions of each WAN connection
on Peplink Balance.
A filter is available to help sort out the active session information. Enter a keyword in the field or check
one of the WAN connection boxes for filtering.
19216811.live