Page 176 / 234
Scroll up to view Page 171 - 175
USER MANUAL
Peplink Balance Series
-176 / 234 -
Copyright © 2014 Peplink
Usage
Device Name/Serial
Number
This field enables you to quickly find your device if you know its name or serial number.
Fill in the field to begin searching. Partial names and serial numbers are supported.
Online Status
This button toggles weather your search will include offline devices.
Managed Wireless
Devices
This table shows the detailed information on each AP, including: channel, number of
clients, upload traffic, and download traffic. Click the blue arrows on the left of the table
to expand and collapse information on each device group. You could also expand and
collapse all groups by using the
buttons.
On the right of the table, you will see the following icons:
Clicking the
icon, and a usage table of each client will appear:
Click the
icon, and a graph displaying usage will appear:
Click any point in the graphs to display detailed usage and client information for that
device, using that SSID, at that point in time. On the
Data Usage by
menu, you could
choose to display the information by SSID or by AP Send/Receive rate.
Page 177 / 234
USER MANUAL
Peplink Balance Series
-177 / 234 -
Copyright © 2014 Peplink
Click the
icon to view a detailed event log for that particular device:
23.6
AP Status
A detailed breakdown of the status of each device is available on
AP>Status
. The information is
organized by device groups as defined in section 22.3.
Page 178 / 234
USER MANUAL
Peplink Balance Series
-178 / 234 -
Copyright © 2014 Peplink
AP Status
Device Name/Serial
Number
This field enables you to quickly find your device if you know its name or serial number.
Fill in the field to begin searching. Partial names and serial numbers are supported.
Online Status
This button toggles weather your search will include offline devices.
Managed Wireless
Devices
This table displays the MAC address, IP Address, firmware version, and specific
configurations of each device. Clicking the
button of each device will result in
the following menu:
Here, you can edit the name and location of your AP. You can also choose the channel
to will transmit from.
You can also batch configure devices on this table by selecting the items you wish to
configure, then clicking
.
After selecting your devices you wish to configure, click
to
reach the following menu:
Select the pull-down menu to choose a firmware pack for the devices that you have
selected.
After selecting your devices you wish to configure, click
to
reach the following menu:
Select the pull-down menu to choose an AP profile for the devices that you have
selected.
Page 179 / 234
USER MANUAL
Peplink Balance Series
-179 / 234 -
Copyright © 2014 Peplink
23.7
Rogue AP
A listing of suspected Rogue devices can be accessed by navigating to
AP>Rogue AP
.
Suspected Rogue Devices
Hovering over the device MAC address will result in a popup with information on how this device was detected. Click
the
icons and the device will be moved to the bottom table of identified devices.
23.8
Toolbox
Additional tools for managing firmware packs, power adjustment, and channel assignment can be found
under
AP>Toolbox
.
Firmware Packs
This is the first menu that will appear. Here, you can manage the firmware of your AP. Clicking on
will result
in information regarding each firmware pack. To receive new firmware packs, you can either press
to download new packs or you can press
to manually upload a firmware pack.
Press
to define which firmware pack is default.
Page 180 / 234
USER MANUAL
Peplink Balance Series
-180 / 234 -
Copyright © 2014 Peplink
24
System Settings
24.1
Admin Security
There are two types of user accounts available for accessing the Web Admin:
admin
and
user
. They
represent two user levels: the
admin
level has full administration access, the
user
level is read-only. The
user level can only access the device's status information; it cannot make any changes on the device.
A web login session will be logged out automatically when it has been idle longer than the
Web Session
Timeout
. Before the session expires, you may click the Logout button in the Web Admin to exit the
session
0 hours 0 minutes
signifies an unlimited session time. This setting should be used only in special
situations, as it will lower the system security level if users do not logout before closing the browser.
Default
: 4 hours 0 minutes.
For security reason, after logging in to the Web Admin Interface for the first time, it is recommended to
change the administrator password.
Configuring the administration interface to be accessible only from the LAN can further improve system
security.
Administrative Settings configuration is located at:
System>Admin Security
.
Admin Account UI
User Account UI
19216811.live