1. Home
    2. /
  2. Manuals
    3. /
  3. Peplink
    4. /
  4. Balance_One
    5. /
  5. 34
Page 166 / 234 Scroll up to view Page 161 - 165
USER MANUAL
Peplink Balance Series
-166 / 234 -
Copyright © 2014 Peplink
Access Control
Restricted Mode
The settings allow administrator to control access using Mac address filtering. Available
options are
None
,
Deny all except listed
,
Accept all except listed
, and
RADIUS MAC
Authentication
.
When
WPA/WPA2 - Enterprise
is configured, RADIUS-based 802.1 x authentication is
enabled. Under this configuration, the
Shared Key
option should be disabled. When using
this method, select the appropriate version using the
V1
/
V2
controls. The security level of this
method is known to be very high.
When
WPA/WPA2- Personal
is configured, a
Shared Key
is used for data encryption and
authentication.
When using this configuration, the
Shared Key
option should be enabled.
Key length must be between eight and 63 characters (inclusive). The security level of this
method is known to be high.
The configuration of
static WEP
parameters enables pre-shared WEP key encryption.
Authentication is not supported by this method. The security level of this method is known to
be weak.
MAC Address
List
Connection coming from the MAC Addresses in this list will be either denied or accepted
based the option selected in the previous field.
RADIUS Server Settings
Host
Enter the IP address of the primary RADIUS server and, if applicable, the secondary RADIUS
server.
Secret
Enter the RADIUS shared secret for the primary server and, if applicable, the secondary
RADIUS server.
Authentication
Port
In field, enter the UDP authentication port(s) used by your RADIUS server(s) or click the
Default
button to enter
1812
.
Accounting Port
In field, enter the UDP accounting port(s) used by your RADIUS server(s) or click the
Default
button to enter
1813
.
Page 167 / 234
USER MANUAL
Peplink Balance Series
-167 / 234 -
Copyright © 2014 Peplink
Guest Protect
Block All Private
IP
Check this box to deny all connection attempts by private IP addresses.
Custom Subnet
To create a custom subnet for guest access, enter the IP address and choose a subnet mask
from the drop-down menu. To add the new subnet, click the
button. To delete a custom
subnet, click the
button.
Block Exception
To block access from a particular subnet, enter the IP address and choose a subnet mask
from the drop-down menu. To add the new subnet, click the
button. To delete a
blocked subnet, click the
button.
Block PepVPN
To block PepVPN access, check this box.
Page 168 / 234
USER MANUAL
Peplink Balance Series
-168 / 234 -
Copyright © 2014 Peplink
Bandwidth Management
Upstream Limit
Enter a value in kpbs to limit the wireless network’s upstream bandwidth. Enter
0
to allow
unlimited upstream bandwidth.
Downstream
Limit
Enter a value in kpbs to limit the wireless network’s do
wnstream bandwidth. Enter
0
to allow
unlimited downstream bandwidth.
Client Upstream
Limit
Enter a value in kpbs to limit connected clients’ upstream bandwidth. Enter
0
to allow
unlimited upstream bandwidth.
Client
Downstream
Limit
Enter a value in kpbs
to limit connected clients’ downstream bandwidth. Enter
0
to allow
unlimited downstream bandwidth.
Max Number of
Clients
Enter the maximum number of clients that can simultaneously connect to the wireless network
or enter
0
to allow an unlimited number of connections.
Page 169 / 234
USER MANUAL
Peplink Balance Series
-169 / 234 -
Copyright © 2014 Peplink
Firewall Settings
Firewall Mode
Choose Flexible
–
Allow all except…
or
Lockdown
–
Block all except…
to turn on the
firewall, then create rules for the firewall exceptions by click the
button. See the
discussion below for details on creating a firewall rule. To delete a rule, click the associated
button. To turn off the firewall, select
Disable
.
Firewall Rule
Name
Enter a descriptive name for the firewall rule in this field.
Type
Choose
Port
,
Domain
,
IP Address
, or
MAC Address
to allow or deny traffic from any of
those identifiers. Depending on the option chosen, the following fields will vary.
Protocol / Port
Choose
TCP
or
UDP
from the
Protocol
drop-down menu to allow or deny traffic using either
of those protocols. From the
Port
drop-down menu, choose
Any Port
to allow or deny TCP or
UDP traffic on any port. Choose
Single Port
and then enter a port number in the provided
field to allow or block TCP or UDP traffic from that port only. You can also choose
Port
Range
and enter a range of ports in the provided fields to allow or deny TCP or UDP traffic
from the specified port range.
IP Address /
Subnet Mask
If you have chosen
IP Address
as your firewall rule type, enter the IP address and subnet
mask identifying the subnet to allow or deny.
MAC Address
If you have chosen
MAC Address
as your firewall rule type, enter the MAC address
identifying the machine to allow or deny.
Page 170 / 234
USER MANUAL
Peplink Balance Series
-170 / 234 -
Copyright © 2014 Peplink
23.3
Profiles
AP profiles assigned to each Pepwave AP device can be configured at
AP>Profiles
.
Each AP is associated with one AP Profile. By default, all devices are associated with the first (Default)
profile. The Default profile cannot be removed.
You can define an AP profile by clicking the
New AP Profile
button. Click the
Clone
button of an existing
profile to create a new profile based on it. To change the settings of an existing profile, click the profile
name and the following screen will be shown.

Rate

3.5 / 5 based on 2 votes.

Popular Peplink Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top