Page 71 / 78 Scroll up to view Page 66 - 70
3
66
BLW-54MF
3.2 Remote Management
BLW-54MF Wireless Router can be managed by any PC from your LAN.
If the router has connected to the Internet, the administrator can also
configure it via the Internet. Owing to the security, however, you must
have the MAC address before performing remote management.
œ
Enable Remote Management Function
Ĉ
You may choose to
Enable
or
Disable
the function of managing BLW-54MF from the remote host.
œ
HTTP/Port
Ĉ
Enter the port number of remote management host.
œ
HTTP/Remote IP Range
Ĉ
Enter an IP address or a range of IP
addresses of the remote management interface.
œ
Allow to Ping WAN port/Remote IP Range
Ĉ
You can choose if you
want to enable and reply the Ping test from the WAN side. After that,
you may set a range of IP addresses to allow to reply the Ping test.
œ
UPNP Enable
Ĉ
If your Windows Operating System supports UPnP
service, when you enable the UPnP service and the BLW-54MF Wireless
Router is connecting with the computer, the task bar will show the icon
of BLW-54MF to inform you that a new device is found and inquire you
whether if you want to set a shortcut on the desktop.
Page 72 / 78
67
3
Chapter 3 Advanced Setup & Configuration
œ
Gaming mode
Ĉ
If you are experiencing difficulties when playing
online games or even certain applications that use voice data, you may
need to enable
Gaming Mode
for these applications to work correctly.
When not playing games or not using these voice applications, it is
recommended that Gaming Mode should be disabled.
œ
PPTP/IPSec
Ĉ
Users who use remote host or VPN can choose IPSec
or PPTP for authentication. These functions can provide maximum
compatibility for your VPN server and make it work fine.
œ
IDENT
Ĉ
Auth/Ident servers
ę
which are supposed to run on the local
user's machine
ę
open port 113 and listen for incoming connections
and queries from remote machines. These querying machines provide
a local and remote "port pair" describing some other already-existing
connection between the machines. The user's "
IDENT
" server is
tasked with looking up and returning the connection's "USER ID" and
perhaps additional information, such as an E-Mail address, full name, or
whatever. You may choose to use
Stealth
or
Closed
which is not to use
this function.
œ
Cancel
Ĉ
If you do not want to configure this setting right now, click
this button to exist this page.
œ
Save
Ĉ
Click this button to save/apply the settings and restart the
system
.
Page 73 / 78
3
68
BLW-54MF
3.3 Firmware
You can upgrade the firmware of BLW-54MF via Web Browser.
First, please go to the website: http://www.planex.com.tw/download/index.
htm to download the latest firmware of BLW-54MF. Be sure that the
firmware is stored in your PC's disk and then click
ņ
Browse...
Ň
to search
for the firmware file which you just downloaded. Click
ņ
Open
Ň
to use
the firmware and click
ņ
Update
.
Ň
After the dialog box pops up and ask
you if you want to continue upgrading the firmware, you can click
ņ
OK
Ň
to start upgrading immediately. Upgrading firmware will not change any
settings, but it is recommended that you should save the settings before
upgrading the firmware.
It takes about 2~3 minutes to upgrade the firmware. When
upgrading, please do not turn off the power of BLW-54MF. After
finishing upgrading, BLW-54MF will restart automatically.
œ
Upgrade Firmware
Ĉ
Please go to the website of Planex
Communications Inc. to download the latest firmware. After that, you
may use
ņ
Browse
ĀŇ
and
ņ
Upgrade
Ň
to update firmware.
œ
Browse
ĀĈ
Click this button to search for the downloaded firmware file
in your hard disk.
œ
Upgrade
Ĉ
Click this button to start upgrading firmware.
Page 74 / 78
69
3
Chapter 3 Advanced Setup & Configuration
3.4 Restart
Click
ņ
Restart
Ň
and then click
ņ
OK
Ň
on the pop-up dialog box to
restart the system.
4. Tools
4.1 Ping Test
This function can help you send
ņ
Ping
Ň
packets to detect if the remote
host is O.K. The response messages will appear below and they can also
help to diagnose the network problems.
œ
Host Name or IP address
Ĉ
Enter the
IP address
or the
Host Name
which you want to test.
œ
Ping
Ĉ
Click this button to start performing ping test and the results will
show on this page.
Page 75 / 78
3
70
BLW-54MF
4.2 DNS Lookup
DNS is short for
Domain Name System
(or
Service
, or
Server
). It
is an Internet service that translates domain name into IP addresses.
Because domain names are alphabetic, they
Ņ
re easier to remember. The
Internet, however, is really based on IP addresses. Every time you use a
domain name, therefore, a DNS service must translate the name into the
corresponding IP address. You may enter a domain name or IP address
on this page,
DNS Lookup
function can enquire for the corresponding IP
address or domain name. For example, the domain name www.planex.net
might translate to 202.210.129.35.

Rate

3.5 / 5 based on 2 votes.

Popular PCI Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top