Page 61 / 78
Scroll up to view Page 56 - 60
3
56
BLW-54MF
œ
Apply
Ĉ
Click this button to save/apply the settings and restart the
system.
Adding a client host to DMZ might expose it to a variety of danger
such as virus or worm attacks because of unrestricted Internet
access; therefore, only use this option as the last means. Besides,
before using DMZ function, you should update the up-to-date
settings of security system and virus signatures on the host.
2.5 Firewall Rule
Firewall is an advanced function which can be used to allow or deny TCP/
IP data packets passing through BLW-54MF Wireless Router. It works like
an IP filter, but has some additional settings; therefore, you can create more
detailed regulations of accessing to BLW-54MF.
œ
Name
Ĉ
Enter the name of the application which you want configure.
œ
Action
Ĉ
.
œ
Source
Ĉ
Enter the starting port number as the starting outbound port for
the special application and then enter the finish port number as the
ending outbound port.
Page 62 / 78
57
3
Chapter 3 Advanced Setup & Configuration
œ
Destination
Ĉ
Scroll down the list to choose the incoming application
type:
TCP
or
UDP type
. Choose the protocols (TCP, UDP or IP) which
used by remote systems or services.
œ
Add
Ĉ
Enter the special application and then click this button to add it to
the rule.
œ
Update
Ĉ
Update the modification you have made to this function.
œ
Delete
Ĉ
Delete the rule you set before.
œ
Cancel
Ĉ
If you do not want to do this setting right now, you may click
this button to exist.
3. Management
3.1 Settings
You can
save settings, load settings, restore factory default settings
and
enable unique
EZ-GO
function on this page.
Ɩ
Save Settings
œ
Save
Ĉ
You can click this icon to save current system settings to your
local disk. (The format will be
ņ
.bin
Ň
file)
Page 63 / 78
3
58
BLW-54MF
Ɩ
Load Settings
œ
Browse
Ā
/Load
Ĉ
Make sure the saved system setting file is in the
local host disk and then click
ņ
Browse
ĀŇ
to search for the saved
system setting file. Click
ņ
Open
Ň
to select the system setting file that
you want and then click
ņ
Load
Ň
to start restore the settings.
Page 64 / 78
59
3
Chapter 3 Advanced Setup & Configuration
Ɩ
Restore Factory Default Settings
œ
Restore
Ĉ
Click
ņ
Restore
Ň
and then click
ņ
OK
Ň
on the pop-up dialog
box, the system will restart to the factory default value afterward.
Ɩ
EZ-GO
All you have to do is
(1) press EZ-GO button at the back of the device
or
(2) enable EZ-GO function on the
ņ
Management
Ɩ
Settings
Ň
page,
and then you may connect with wireless network and set encryption
in a short time, but it must collocate with our company's
GW-US54SG
wireless adapter
to make it work.
Please install the driver and the utility of GW-US54SG first, and then
use
JumpStart
utility to cooperate with
EZ-GO
function to make a
connection.
1.To install the driver and utility of GW-US54SG, please click
ņ
Next
Ň
to
proceed.
Page 65 / 78
3
60
BLW-54MF
2.Choose a destination location to install GW-US54SG, and then click
ņ
Next
Ň
to continue installing.
3.After selecting the location for GW-US54SG and then choose the
program name of the destination folder, please click
ņ
Next
Ň
to proceed.
19216811.live