Page 66 / 78
Scroll up to view Page 61 - 65
61
3
Chapter 3 Advanced Setup & Configuration
4.If the warning dialog box pops up, please click
ņ
Yes
Ň
to complete the
installation.
5.After completing the installation, there will be a grey running little man
icon exist on the desktop
which is the utility icon of GW-US54SG,
users can use this program to configure GW-US54SG. And there is another
icon of the utility which is called
JumpStar
, and it is used for
making connection with
EZ-GO.
6.After the icons appear, the
InstallShield Wizard Complete
window
shows. Please click
ņ
Finish
Ň
to complete the installation.
Page 67 / 78
3
62
BLW-54MF
7.The InstallShield Wizard will ask if you want to restart your computer
right after finishing installation, please click
ņ
Finish
Ň
after you finish
and save the work at hand.
8.After the computer restarts, the following window will show, please
scroll down the list to choose a country domain for the utility.
Page 68 / 78
63
3
Chapter 3 Advanced Setup & Configuration
9.After choosing the country domain, please enter the configuration page
of BLW-54MF. Go to
ņ
Management
Ɩ
Settings
Ň
page and then choose
ņ
Enable
Ň
EZ-GO function, and the
Status EZ-GO
LED on the front
panel of BLW-54MF will be blinking. The other way to enable EZ-GO
function is to press EZ-GO button on the back panel of BLW-54MF, and
you can also see
Status EZ-GO
LED blinking as well. The blinking
LED means that you can use
JumpStart
to start searching BLW-54MF
and make a connection. The searching time period is
5 minutes
long. If
GW-US54SG cannot connect with BLW-54MF in 5 minutes, this LED
will be off and the EZ-GO function will be disabled automatically. If
you want to restart EZ-GO function, please press EZ-GO button at the
back of BLW-54MF again or choose
ņ
Reset EZ-GO
Ň
function on the
configuration page of BLW-54MF again.
Page 69 / 78
3
64
BLW-54MF
10.If you wan to continue connecting GW-US54SG with BLW-54MF,
please double click on the
JumpStart
icon on the desktop to enter
configuration page. If this is the first time you set up wireless
connection for GW-US54SG and BLW-54MF, please choose
ņ
Create
a new wireless network
Ň
; if you want to connect with an existing
network, please choose
ņ
Connect to an existing wireless network
Ň
.
Click
ņ
Next
Ň
to continue setting up.
11.This page reminds you to check if the EZ-GO LED on BLW-54MF is
blinking steadily as it shows here. If the LED is blinking correctly, click
ņ
Yes
Ň
to proceed.
Page 70 / 78
65
3
Chapter 3 Advanced Setup & Configuration
12.After JumpStart does the auto-detection, it will ask you to set a
password for adding devices to your network. And this password
will become the
Pre-shared Key
for GW-US54SG and BLW-54MF.
Meanwhile, the wireless authentication mode of BLW-54MF will
become
ņ
WPA-AUTO
Ň
and
ņ
PSK
Ň
automatically. Click
ņ
Next
Ň
to
complete the settings.
13.The following screen shows and it means GW-US54SG has
successfully connect with BLW-54MF. Click
ņ
Finish
Ň
to complete the
settings.
19216811.live