1. Home
    2. /
  2. Manuals
    3. /
  3. OTE
    4. /
  4. Speedport W 724V Type Ci Cosmote
    5. /
  5. 29
Page 141 / 152 Scroll up to view Page 136 - 140
141
6. Enter System Name in the entry field.
.
7. Once you have adapted the settings, confirm the changes by clicking the tab
. If you do not want to save changes, click on the tab
.
Page 142 / 152
8.4 Save Setting
Once you have configured
to secure this configuratio
always retrieve this bac
extensive configuration ch
Speedport. If you do not
delivery status. In this c
passwords are lost. The p
on the backside of your Sp
8.4.1 Backup setti
You can backup the settin
stick), in order to always
backup.
Figure 8-4 Saving
1. Click on
Save settings
.
2. Click on
Saving
.
3. Click on the tab
4. Confirm the inquiry of
choose the location of sto
142
d your Speedport according to your needs,
on. If all these settings are accidently lost or e
ckup. You can load your backup into the
hanges have resulted in unexpected malfunc
t have a valid backup, you can reset your
case, all configuration settings, as well as
preset password, the device password printe
peedport, has to be used again.
ings
ngs of your Speedport on a data carrier (i.e. h
be able to update your Speedport to the st
.
your internet browser by clicking the tab
orage.
it makes sense
erased, you can
e Speedport, if
ctioning of your
r Speedport to
personally set
ed on the label
hard drive, USB
tatus of the last
and
Page 143 / 152
143
8.4.2 Restore settings
If you have backed up the settings of your Speedport on a data carrier before, you
can always update your Speedport to the status of the last data backup.
Figure 8-5 Restore
1. Click on
Save settings
.
2. Click on
Restore
.
3. Click on
.
4. Choose the storage location where the backup exists.
5. Click on
.
Notice:
After successfully restoring your settings your Speedport will be restarted
automatically. During this procedure your Speedport displays a message. After 180
seconds you can end this procedure by clicking the tab ‘OK’.
Page 144 / 152
144
8.5 Problem handling
If you encounter problems restart your Speedport or reset it to delivery status.
8.5.1 Restart Speedport
If your Speedport does not function properly anymore due to technical reasons, you
can restart it. Your settings will be kept then.
Figure 8-6 Restart
1. Click on
Problem Handling
.
2. Click on the statement
Restart
.
3. Click on the tab
.
Notice:
Your Speedport will be restarted now. You cannot carry out settings during
that time. After that you can recall the configuration program. The restart is finished
after 70 seconds.
8.5.2 Reset all settings.
The settings carried out by you have caused irregularities and you cannot correct
these manually. In this case you can reset the Speedport to delivery status and
Page 145 / 152
145
reconfigure it manually, to restore backed up settings. Under some circumstances
you can conveniently reset your Speedport automatically and let it be reconfigured
by the Telekom.
Reset all settings and reconfigure Speedport manually.
If you have backed up your settings at the moment, when your Speedport still
functioned regularly as described under the menu
Settings backup
, you can easily
restore this status, without loosing all settings.
Figure 8-7 Reset all settings
1. Click on
Problem handling.
2. Click on
Reset all settings
.
3. Confirm the security inquiry by clicking the tab
. Your
Speedport will be restarted automatically.
8.6 Firmware update
The firmware is the operating system of your Speedport. Inside the firmware, the
whole functionality of your Seedport is saved. You have purchased a 100%
developed and tested product. Yet it might be that the firmware has to be updated
to a new version.

Rate

4.5 / 5 based on 2 votes.

Popular OTE Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top