Page 136 / 152
Scroll up to view Page 131 - 135
136
7.10 Speed Dial
Use this screen to specify phone numbers for speed dial.
Figure 7-10 Speed Dial
1. Click on
Speed Dial
.
2. Enter the value for the prefix in the entry field (speed dial number).
3. Enter a Name in the entry field.
4. Enter the complete number for calling out in the entry field.
5. When you have finished modifying your settings, confirm changes by clicking the
tab
. If you do not want to save your changes click on the tab
.
6. In the following table, you can use
to modify the settings. Or use
to
delete the specific file.
Page 137 / 152
137
Chapter 8 Settings
8.1 Change device password
Access to the configuration menu is protected by a device password. The assigned
device password of the default settings can be found on the label on the backside of
your Speedport.
Figure 8-1 Change device password
1. Click on
Change device password
.
2. Configure the following parameters:
Table 8-1 Password Parameters
Parameter
Description
Previous device
password
The default is as follows:
User: <label on the back side of Speedport>
New device
password
User self-defined password.
Display Character
The characters will be displayed in the password field if
this is enabled.
3. Enter your current device password in the entry field
.
Page 138 / 152
138
4. Enter your own personal device password in the entry field
.
Notice:
The personal password has to consist of at least eight and at most twelve
alphanumerical signs (A-Z, a-z, 0-9). Upper and lower cases will be considered. Avoid
names or terms, which are too obvious. Mix numbers and letters.
5. Once you have adapted the settings, confirm the changes by clicking the tab
. If you do not want to save changes, click on the tab
.
Forgot device password
If you have forgotten your personal device password and cannot access anymore the
user interface of your Speedport, you have to reset your Speedport to delivery
status.
1. Push for at least five seconds with a thin item in the opening on the backside of
your Speedport (labeled with
Reset
).
Notice:
All previous user-configured settings will be lost!
2. Now use the preset device password on the
type label
printed on the backside of
your Speedport to log in again.
Page 139 / 152
139
8.2 TR069
In this menu the TR069 Remote Server parameters are displayed.
Figure 8-2 TR069
1. Click on
TR069
.
2. The following parameters are displayed:
Table 8-2 TR069 Parameters
Parameter
Description
ACS URL
Preconfigured ACS URL
Username/Password
User name and password for the Remote Management
server to access the device.
Connection Request
URL
It is generated automatically.
Connection Request
Username/Password
User name and password for the device to access the
NMS
server
Enable Periodic
Inform
To enable periodic inform.
Page 140 / 152
140
8.3 SNMP
Configure the SNMP settings in order to manage the device.
SNMP service provides the ability to monitor and communicate status information
between a variety of hosts.
Figure 8-3 SNMP
1. Click on
SNMP
.
2. Configure the following parameters:
Table 8-3 SNMP Parameters
Parameter
Description
SNMP
Select either Activated or Deactivated.
Get Community
The default is public.
Set Community
The default is private.
System Name
Enter the name of the system.
3. Set the hook at
Activated
, if you want to activate SNMP.
4. Enter Get Community in the entry field.
.
5. Enter Set Community in the entry field.
.
19216811.live