Page 66 / 152
Scroll up to view Page 61 - 65
66
Figure 5-10b Time rules
7. If you want to set the internet connection for weekdays, you can enter a specific
day time for every day. Enter the time frames after every respective
weekday
.
Notice:
You can also set up day overlapping rules – in our example Saturday to
Sunday.
8. Set the
hook
for devices on which the set timer rule shall be applied to.
Suggestion:
If you click on the statement
Manage computer
, you will be forwarded
to the submenu Overall of the devices in the home network in the menu home
network. You can administer the connected devices there and add not yet registered
devices. More information for computer administration is available in the chapter
home network.
Notice:
Changes, which have not been saved are getting lost after switching to
another menu.
Page 67 / 152
67
9. When you have adapted your settings, confirm the changes by clicking the tab
. If you do not want to save your changes click on the tab
.
Suggestion:
By clicking the statement
Set up new timer rule
you can set up new
time rules.
Notice:
When the timer rule is active the effected devices cannot build up a new
connection to the internet.
Extended blocker(s)
With an extended block you can lock certain services and applications. Every port is
usually assigned to a rule of a certain service or a certain application. If you want to
block certain services or applications for one or all devices from the home network,
you can set this up here.
Figure 5-11 Extended blocker(s)
1. Click on
Filter and Time rule
.
Page 68 / 152
68
2. Click on the entry
Extended blocker(s)
.
3. Set the hook at
new blocker
.
4. Enter the name for a new blocker in the entry field
.
5. Set the
hook
for the registered blocks, which you want to activate.
6. Set the
hook
for devices, on which the set locks shall be applied to.
Suggestion:
If you click on the statement
Manage computer
, you will be forwarded
to the submenu Overall of the devices in the home network in the menu home
network. You can administer the connected devices there and add not yet registered
devices. More information for computer administration is available in the chapter
home network.
Notice:
Changes, which have not been saved are getting lost after switching to
another menu.
7. When you have adapted your settings, confirm the changes by clicking the tab
. If you do not want to save your changes click on the tab
.
Suggestion:
By clicking the statement
Create other blocker
you can generate
additional locks.
Page 69 / 152
69
5.3
Advanced Settings
5.3.1
Routing
5.3.1.1 Static Routing
This screen can be used to set IPv4 static routing parameters.
Figure 5-12 Static Routing
1. Click on
Static Routing
.
2. Configure the following parameters:
Table 5-5 Parameters for Static Routing
Parameter
Description
WAN Connection
Choose WAN connection for static routing.
Network Address
Destination network address.
Subnet Mask
Enter the subnet mask for the network address above.
Gateway
Enter the IP addess of the gateway in order to reach the
desired network/host.
3. Choose your WAN connection from the list.
Page 70 / 152
70
4. Enter the network address in the entry field
5. Enter the subnet mask in the entry field
6. Enter the gateway in the entry field
7. When you have modified your settings, confirm the changes by clicking the tab
.
19216811.live