OTE Speedport W 724V Type Ci Cosmote Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

Speedport W 724V Type Ci Cosmote

Page 81 / 152 Scroll up to view Page 76 - 80

Figure 5-19 E-mail abuse detection

1. Click on

E-mail abuse detection

2. Set the hook at

Use e-mail abuse detection

Page 82 / 152

Figure 5-20 List of allowed e-mail servers

3. Click on

List of allowed e-mail servers

4. If you want to add extra E-mail servers, enter the URL or IP address of the

additional E-mail server in the entry field

5. When you have modified your settings, confirm the changes by clicking the tab

. If you do not want to save your changes click on the tab

Notice:

If the delivery of E-mails does not work with your local E-mail program

please check, whether the outgoing mail server in use is listed under the secure

E-mail server.

Page 83 / 152

Chapter 6 Home Network Menu

The Wireless home network or WLAN (Wireless Local Area Network) consists over

components, which are connected via radio wave. It enables the Wireless connection

of your notebook, your printer or other WLAN capable devices with your Speedport.

You have two frequency bands available.

In the menu

Basic WLAN settings

you can modify the WLAN settings according to

your requirements. You can assign WLAN names, set different encryption methods,

configure timer and modify the transmission settings.

6.1 Basic WLAN settings

Figure 6-1 Basic settings for WLAN

1. Click on

Basic WLAN settings

2. Put the hook at

Switch on WLAN in 2.4-GHz frequency band

, if you want the

WLAN function to be activated in the respective frequency band.

3. Put the hook at

Switch on WLAN in 5-GHz frequency band

, if you want the WLAN

function to be activated in the respective frequency band.

Suggestion:

Remove both Hooks, if you want to deactivate WLAN.

Page 84 / 152

Suggestion:

By pressing the WLAN button on the front side of your Speedport

frequency bands will be activated and deactivated at the same time.

6.1.1 SSID Settings

The

WLAN name

, also called SSID (Service Set IDentifier) helps to distinguish

between Wireless home networks in the same location. The

WLAN name

must be

known for every device that is connected to the WLAN.

Notice:

The basic settings for the WLAN name (SSID) and the encryption can be

found on the back side label of your Speedport device.

Figure 6-2 Name and encryption

1. Click on

Basic WLAN settings

2. Configure the following parameters:

Table 6-1 Parameters for SSID Settings

Parameter

Description

Page 85 / 152

Choose SSID

There are three SSIDs:

•

SSID1

•

SSID2

•

SSID3

WLAN Name

Enter the SSID. We suggest you to change the SSID to one

of your preference.

WLAN name visibility Choose either Visible or Invisible. If you choose Invisible

then you must manually configure at your wi-fi capable

device the Wi-Fi name and settings.

Enable SSID Isolation

When you select this check box, the subscribers with

different

SSIDs cannot communicate with each other.

Maximum Clients

The range is from 1 to 32.

Up/Down Stream

Enter the value. The range is from 0 - 100Mbps.

Encryption Type

There are six types (default is WPA/WPA2):

•

WPA-WAP2-802.1x

•

WPA2

•

WPA/WPA2 (default)

•

WPA

•

WEP

•

Unencrypted

Encryption Method

There are three methods (default is TKIP+AES):

•

TKIP

•

AES

•

TKIP+AES (default)

WLAN Key

Enter the WLAN key in each computer that you want to

connect to the WLAN. It is suggested that you change

your WLAN key to a one of your preference.

3. Click on the statement

Name and encryption.

4. Enter the WLAN name (SSID) for each frequency bands in the entry field

Notice:

The WLAN name (SSID) can also be 32 signs long and consist of numbers,

letters and special signs. It should not contain information about the identity of the

Wireless home network, meaning no family or company names as well as birth days.

Please observe the upper and lower case. The connection to network capable

devices, which do not use valid WLAN names (SSID) will be interrupted until valid

WLAN names (SSID) are also established there.

5. Choose the WLAN name, which is to be displayed (

visible

invisible

Rate

Popular OTE Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share