Page 56 / 152
Scroll up to view Page 51 - 55
56
5.1.5 3G Backup
Configure 3G backup in case that the xDSL is not available.
When 3G failover is enabled, DSL or Ethernet WAN is still the primary connection.
But if DSL or Ethernet WAN connection fails, then the router will use 3G connection
if 3G dongle is plugged.
Figure 5-5 3G Backup
1. Click on
3G Backup
.
2. Set the hook at the
Enable 3G Failover
.
3. Enter your connection name in the entry field
.
4. Enter pin code in the entry field
.
5. Enter APN in the entry field
.
6. Enter dial number in the entry field
.
7. Enter MTU port in the entry field
.
Page 57 / 152
57
8. When you have adapted your settings, confirm the changes by clicking the tab
. If you do not want to save your changes click on the tab
.
5.1.6 Port Binding
Bind a service with a LAN port and SSIDs.
Figure 5-6 Port Binding
1. Click on
Port Binding
.
2. Choose your WAN connection from the list
3. Set the
hooks
at the options based on your needs.
Suggestion:
One port can only be bound to one route connection. If it is bound to
multiple route connections, only the first configuration is valid. By default, LAN4 is
bounded to the OTETV service. By default, all ports except LAN4 are binded to the
Fast Internet service and LAN4 to OTE TV service. If you want to assign all ports for
Internet access then you just have to modify the port bindings on this menu.
Page 58 / 152
58
5.2
Features
5.2.1
DynDNS
Via a dynamic DNS (Dynamic Domain Name System) you can assign an individual
fixed domain to your Speedport on the internet, even if it does not have a fixed IP
address.
The fixed (static) name of the domain will be dynamically forwarded to the current IP
address. Like this your home network is permanently reachable from outside, for
example for the maintenance of an own web server. For the use of dynamic DNS you
need an account (user name) with a provider for dynamic DNS, a password and a
static domain name.
Figure 5-7 DDNS
1. Click on
DynDNS
.
2. Configure the following parameters:
Page 59 / 152
59
Table 5-2 DDNS Parameters
Parameter
Description
Use Dynamic DNS
Select the check box to enable the DDNS function.
Provider
DDNS service provider.
Server
Server address.
Domain Name
Domain name corresponding to the user.
User Name
DDNS server user name.
Password
DDNS server password.
3. Click on
Access data
.
4. Set the hook at
Use dynamic DNS
.
5. Choose your provider for dynamic DNS from the list
.
6. Enter your domain name in the entry field
.
7. Enter your user name in the entry field
.
8. Enter your personal password in the entry field
.
9. When you have adapted your settings, confirm the changes by clicking the tab
. If you do not want to save your changes click on the tab
.
Page 60 / 152
60
5.2.2
Port Forwarding
With Port forwarding, the incoming data packages at one distinct port on your
Speeport will not be forwarded to the same port, but to another port of a
networkable device within your home network.
Figure 5-8 Port Forwarding
1. Click on
Port Forwarding
.
2. Configure the following parameters:
19216811.live