Page 116 / 181
Scroll up to view Page 111 - 115
iConnect625W ADSL/ADSL2+ Router User Guide
116
selections are from
0
to
7.
Any User Priority bits that have not been mapped to a CoS is defaulted to CoS6,
the lowest priority.
Step 5:
Click the
Apply
button to apply the settings.
Step 6:
To save your configuration, please refer to the section under
Save / Restart
Menu
.
Page 117 / 181
iConnect625W ADSL/ADSL2+ Router User Guide
117
8.15.3
Ingress Layer 3
The Layer 3 page allows you to map ToS (type of service) bits of incoming packets from
the IP network to CoS for each WAN/LAN interface.
To configure
Layer 3
, follow the steps below.
Step 1
:
From the
Ingress
screen, select a
LAN Interface
from the
Interface
drop-down
list as shown on the screen below.
Step 2:
Highlight the
Layer 3
radio option. The following page appears:
Step 3:
Select the
CoS1
from the
Class of Service
drop-down list. The
Page 118 / 181
iConnect625W ADSL/ADSL2+ Router User Guide
118
selections are in order of
descending
priority, i.e. CoS6 has the lowest priority.
Step 4:
In the
ToS
field, if you enter
22
for instance, this means that any incoming
packet from the selected
Interface
in
Step 1
(Layer 3) with a ToS of
22
is
mapped to
CoS1
, the highest priority. This is normally given to voice packets.
Step 5:
Leave the default value
CoS1
option in the
Default Non-IP
drop-down list. This
is the highest priority.
Step 6:
Click the
Apply
button to apply the settings.
Step 7:
To save your configuration, please refer to the section under
Save / Restart
Menu
.
Page 119 / 181
iConnect625W ADSL/ADSL2+ Router User Guide
119
8.15.4
Static Configuration
The Static page enables you to configure a static CoS for all packets received on a WAN
or LAN interface.
To configure
Static
, follow the steps below.
Step 1
:
From the
Ingress
screen, select a
LAN
or
WAN Interface
from the
Interface
drop-down list as shown on the screen below.
Step 2:
Highlight the
Static
radio option. The following page appears:
Page 120 / 181
iConnect625W ADSL/ADSL2+ Router User Guide
120
Step 3:
Select the
Class of Service
from the drop-down list.
Step 4:
Click the
Apply
button to apply the settings.
Step 5:
To save your configuration, please refer to the section under
Save / Restart
Menu
.
19216811.live