Page 96 / 181
Scroll up to view Page 91 - 95
iConnect625W ADSL/ADSL2+ Router User Guide
96
Step 7:
Enter the destination MAC address in the
Dest MAC
field.
Step 8:
Select the destination port from the
Dest Port
drop-down list.
Entering 00-00-00-00-00-00 in the Source or Destination MAC fields means that
ALL MAC addresses are matched.
Step 9:
Select the protocol to be filtered from the
Protocol
drop-down list. You can
choose from the following options:
PPPoE Session, PPPoE Discovery, IPX-
Ethernet II, RARP, IPv6, IPv4
and
Any.
Step 10:
Select the mode from the
Mode
drop-down list. The options are
Allow
or
Deny.
Step 11:
Click the
Add
button.
A maximum of 20 MAC filter rules can be supported with bridge filtering.
Step 11:
Click the
Apply
button to apply the settings.
Step 12:
To save your configuration, please refer to the section under
Save / Restart
Menu
.
Page 97 / 181
iConnect625W ADSL/ADSL2+ Router User Guide
97
8.9.1
Editing Bridge Filters
Follow the steps below to edit an existing bridge filter.
Step 1:
From the
Bridge Filter
screen, highlight the
Edit
radio button from existing
filter rules and edit the rule, as shown below.
Step 2:
Make the required changes to the
MAC Address
,
Protocol
and
Mode
options
and click the
Apply
button to apply the settings.
Step 3:
To save your configuration, please refer to the section under
Save / Restart
Menu
.
Page 98 / 181
iConnect625W ADSL/ADSL2+ Router User Guide
98
8.9.2
Deleting Filter Rules
Follow the steps below to delete an existing bridge filter.
Step 1:
From the
Bridge Filter
screen, check the
Delete
checkbox for the rule to be
removed as shown in the image below.
Step 2:
Click the
Apply
button to apply the settings.
Step 3:
To save your configuration, please refer to the section under
Save / Restart
Menu
.
Page 99 / 181
iConnect625W ADSL/ADSL2+ Router User Guide
99
8.10
Dynamic DNS Client
Dynamic DNS allows you to register with a Dynamic DNS provider. Each time you
connect to the Internet, your ISP assigns a different IP address to your iConnect625W
router.
The Dynamic DNS feature allows you to register your iConnect625W router with a DNS
server and access it each time using the same host name. It is useful in web hosting and
FTP services.
To enable
Dynamic DNS Client
, follow the steps below.
Step 1
:
From the
Advanced
tab, click the
Dynamic DNS Client
link provided. The
following page appears:
Step 2:
The
Connection
field is defaulted to the iConnect625W's WAN connection
over which your router will be accessed. Select another connection from the
Connection
drop-down list.
Page 100 / 181
iConnect625W ADSL/ADSL2+ Router User Guide
100
Step 3:
Select the
DynDNS
for the
DDNS Server
option. If there are different DDNS
service providers, select the other options provided as shown below.
Step 4:
Check the
DDNS Client
checkbox to enable the DDNS client feature for the
WAN connection.
Step 5:
Enter your
User Name
and
Password
fields using the same user name and
password you have specified during the registration of the DNS hostname.
These fields are mandatory.
Step 6:
Enter the domain name of the DNS server into the
Domain Name
field.
Step 7:
Click the
Apply
button to apply the settings.
Step 8:
To save your configuration, please refer to the section under
Save/Restart
Menu
.
19216811.live