Page 126 / 181
Scroll up to view Page 121 - 125
iConnect625W ADSL/ADSL2+ Router User Guide
126
8.17.2
Low Latency Queue Discipline
To enable
Low Latency Queue Discipline
, follow the steps below.
Step 1
:
From the
Advanced
tab, click the
Shaper
link provided. The following page
appears:
Step 2
:
Select the interface from the
Interface
drop-down list.
Step 3
:
Check the
Low Latency Queue Discipline
checkbox. The
MyConnection
example below has a total of 300 kbits of bandwidth, of which 100 kbits is given
to CoS2 when there is no CoS1 packets. When there is no CoS1 or CoS2
packets, CoS6 packets have the whole 300 kbits of bandwidth.
Page 127 / 181
iConnect625W ADSL/ADSL2+ Router User Guide
127
CoS1 is not rate-controlled so the field is disabled.
Step 4:
Click the
Apply
button to apply the settings.
Step 5:
To save your configuration, please refer to the section under
Save / Restart
Menu
.
Page 128 / 181
iConnect625W ADSL/ADSL2+ Router User Guide
128
8.17.3
PRIOWRR
PRIOWRR stands for Priority Weighted Round Robin.
To enable
PRIOWRR
, follow the steps below.
Step 1
:
From the
Advanced
tab, click the
Shaper
link provided. The following page
appears:
Step 2
:
Select the interface from the
Connection
drop-down list.
Step 3
:
Check the
PRIOWRR
checkbox to enable it, as shown.
Step 4
:
PRIOWRR operates only on the number of packets being transmitted, so the
Max Rate
field has been disabled.
Page 129 / 181
iConnect625W ADSL/ADSL2+ Router User Guide
129
Step 5
:
Only percentages can be assigned to
CoS2 - CoS6
fields. In the
MyConnection
example below, when there are no CoS1 packets, CoS2, CoS3 and CoS4 each
have 10% and CoS6 has 70% as shown in the screen image below. This is
similar to the
Low Latency Queue Discipline
, except that
PRIOWRR
is packet-
based and the other is rate-based.
Step 6:
Click the
Apply
button to apply the settings.
Step 7:
To save your configuration, please refer to the section under
Save / Restart
Menu
.
Page 130 / 181
iConnect625W ADSL/ADSL2+ Router User Guide
130
8.18
SSH Access Control
The SSH Access Control feature allows you to access the iConnect625W remotely via
SSH from the WAN side.
To configure
SSH Access Control
, follow the steps below.
Step 1
:
From the
Advanced
tab, click the
SSH Access Control
link provided. The
following page appears:
Step 2
:
Check the
Enable
checkbox.
Step 3
:
In the
Choose a Connection
field, leave the default WAN connection selected.
Step 4
:
In the
Remote Host IP
field, enter the WAN-side IP address that you will use to
access the iConnect625W router. The default setting is 0.0.0.0.
Step 5
:
In the
Remote Netmask
field, enter the netmask of your WAN-side IP address.
Step 6:
Click the
Apply
button to apply the settings.
Step 7:
To save your configuration, please refer to the section under
Save / Restart
Menu
.
19216811.live