Page 306 / 342 Scroll up to view Page 301 - 305
16
Using Managed Services
306
Nokia IP45 Security Platform User’s Guide v4.0
7.
Click Finish.
Following are the results:
±
If a new firmware is available, the IP45 downloads it. This can take several minutes.
When the download is complete, the IP45 restarts by using the new firmware.
±
The Welcome page opens.
±
The services to which you are subscribed are now available on your IP45 and are listed
on the Account page. For more information, see
“Viewing Service Information from the
Account Page”
on page 306.
Note
A local administrator cannot locally modify the settings that the service center configures
remotely. To change these settings locally, disconnect from the service center.
Viewing Service Information from the Account Page
The following table provides the information about your subscription:
Table 60
Account Page Fields
Field
Description
Service Center
Name
Name of the Service Center to which you are connected (if
known).
Subscription
will end on
Date on which your subscription to services ends.
Service
Services available in your service plan.
Subscription
Status of your subscription to each service:
Subscribed
Not Subscribed
Page 307 / 342
Viewing Service Information from the Account Page
Nokia IP45 Security Platform User’s Guide v4.0
307
Refreshing your Service Center Connection
The refresh option restarts the connection to the service center and refreshes the service settings
of your device.
To refresh your service center connection
1.
Choose Services from the main menu, and click the Account tab.
The Account page opens.
2.
In the Service Account area, click Refresh.
The IP45 reconnects to the Service Center.
Your service settings are refreshed.
Status
Status of each service:
Connected: you are connected to the service through the
Service Center.
N/A: the service is not available.
Mode
Mode to which each service is set.
For further information, see sections on Web Filtering, Virus
Scanning and Automatic and Manual Updates.
Table 60
Account Page Fields (
continued
)
Field
Description
Page 308 / 342
16
Using Managed Services
308
Nokia IP45 Security Platform User’s Guide v4.0
Note
When you connect to a service center using a DNS name, the DNS address is saved,
and periodically looked up again. This process allows you to change the IP address of
the service center without disconnecting all the connected devices.
Configuring your Account
You may access your service center Web site, for additional configuration options of your
account.
To configure your account
1.
Choose Services in the main menu, and click the Account tab.
The Account page opens.
2.
In the Service Account area, click Configure.
Note
If no additional settings are available from your service center, this button does not
appear.
Your service center Web site opens.
3.
Follow the instructions on the window.
Disconnecting from your Service Center
If desired, you can disconnect from your Service Center.
To disconnect from your service center
1.
Choose Services from the main menu, and click the Account tab.
The Account page opens.
2.
In the Service Account area, click Connect.
The Setup Wizard opens, with the first Subscription Services dialog box displayed.
3.
Uncheck the I wish to connect to a service center check box.
4.
Click Next.
The Done window opens with a success message.
5.
Click Finish.
Page 309 / 342
SofaWare Security Management Portal
Nokia IP45 Security Platform User’s Guide v4.0
309
Following are the results:
±
You are disconnected from the Service Center.
±
The services to which you were subscribed are no longer available on your IP45.
SofaWare Security Management Portal
The SofaWare Security Management Portal (SMP) is a security platform that enables centralized
management of a large number of firewalls embedded in broadband access devices or gateways.
Note
Configure the management servers by using SMP, before you can use subscription services
such as Web filtering, email antivirus, and software updates.
Using the Sofaware Management Portal, you can:
±
Browse and update your user database.
±
Update security policies and user interface files.
±
Configure and fine-tune SofaWare management servers.
To create a gateway of type IP45 on SofaWare Security Management Portal
1.
Click New Gateway in the main menu of SMP portal.
The new gateway page opens.
2.
Select a new gateway type, IP45.
The registration key is automatically generated.
3.
Save the settings that you made.
Click the Servers on the main menu for a list of server groups and management servers.
For more information, see SofaWare Management Portal/SofaWare Management Center
documents.
Web Filtering
When Web filtering is enabled, access to Web content is restricted according to the categories
specified under Allow Categories. Adult users can view Web pages with no restrictions, only
after they provide the administrator password from the Web filtering popup window.
Note
If you are remotely managed, contact your service center to change these settings.
Page 310 / 342
16
Using Managed Services
310
Nokia IP45 Security Platform User’s Guide v4.0
To enable or disable Web filtering
1.
Choose Services from the main menu, and click the Web Filtering.
The Web Filtering page opens.
2.
Move the On/Off lever upwards or downwards.
Web Filtering is enabled or disabled for all internal network computers.
Selecting Categories to Block
You can define which types of Web sites are considered appropriate for your family or office
members, by selecting the categories. Categories marked with a check mark remain visible,
while categories marked with a plus mark (+) are blocked and require the administrator
password for viewing.
Note
If you are remotely managed, contact your service center to change these settings.
To allow or block a category
1.
In the Allow Categories area, click the check mark or the plus sign (+) next to the desired
category.
2.
Click Apply.

Rate

3.5 / 5 based on 2 votes.

Popular Nokia Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top