1. Home
    2. /
  2. Manuals
    3. /
  3. Netopia
    4. /
  4. 3347-02 Qwest
    5. /
  5. 27
Page 131 / 351 Scroll up to view Page 126 - 130
131
Links Bar
RADIUS Server authentication
RADIUS servers allow external authentication of users by means of a remote authentica-
tion database. The remote authentication database is maintained by a Remote Authentica-
tion Dial-In User Service (RADIUS) server. In conjunction with Wireless User Authentication,
you can use a RADIUS server database to authenticate users seeking access to the wire-
less services, as well as the authorized user list maintained locally within the Gateway.
If you select
WPA-802.1x
, the screen expands.
Click the
Confi
gure RADIUS Ser
ver
button.
Page 132 / 351
132
The Configure RADIUS Server screen appears.
Enter your RADIUS Server information in the appropriate fields:
•
RADIUS Server Addr/Name:
The default RADIUS server name or IP address that you
want to use.
•
RADIUS Server Secret:
The RADIUS secret key used by this server. The shared secret
should have the same characteristics as a normal password.
•
Alt RADIUS Server Addr/Name:
An alternate RADIUS server name or IP address, if
available.
•
Alt RADIUS Server Secret:
The RADIUS secret key used by this alternate server. The
shared secret should have the same characteristics as a normal password.
•
RADIUS Server Port:
The port on which the RADIUS server is listening, typically, the
default 1812.
Click the
Sa
ve Chang
es
button.
Page 133 / 351
133
Links Bar
WPA-PSK
One of the easiest ways to enable Privacy on your Wireless network is by selecting
WPA-PSK
(Wi-Fi Protected Access) from the pull-down menu.
The screen expands to allow you to enter a
Pre Shared Key
. The key can be between 8
and 63 characters, but for best security it should be at least 20 characters. When you have
entered your key, click the
Sa
ve Chang
es
button.
Page 134 / 351
134
WEP-Manual
Alternatively, you can enable WEP (Wired Equivalent Privacy) encryption by selecting
WEP-Manual
from the Privacy pull-down menu.
You can provide a level of data security by enabling WEP (Wired Equivalent Privacy) for
encryption of network data. You can enable 40-, 128-, or 256-bit WEP Encryption (depend-
ing on the capability of your client wireless card) for IP traffic on your LAN.
Page 135 / 351
135
Links Bar
WEP - Manual
allows you to enter your own encryption keys manually. This is a difficult
process, but only needs to be done once. Avoid the temptation to enter all the same char-
acters.
Encryption Key Size #1 – #4
: Selects the length of each encryption key. The longer the
key, the stronger the encryption and the more difficult it is to break the encryption.
Encryption Key #1 – #4
: The encryption keys. You enter keys using hexadecimal digits.
For 40/64bit encryption, you need ten digits; 26 digits for 128bit, and 58 digits for 256bit
WEP. Hexadecimal characters are 0 – 9, and a – f.
Examples:
•
40bit: 02468ACE02
•
128bit: 0123456789ABCDEF0123456789
•
256bit:
592CA140F0A238B0C61AE162F592CA140F0A238B0C61AE162F21A09C
Use WEP encryption key (1 – 4) #
: Specifies which key the Gateway will use to encrypt
transmitted traffic. The default is key #1.
Click the click
Sa
ve Chang
es
button.
Any WEP-enabled client must have an identical key of the same length as the Router, in
order to successfully receive and decrypt the traffic. Similarly, the client also has a
‘default’ key that it uses to encrypt its transmissions. In order for the Router to receive the
client’s data, it must likewise have the identical key of the same length.

Rate

4.5 / 5 based on 2 votes.

Popular Netopia Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top