Administration

66

N600 Wireless Dual Band Gigabit Router WNDR3700v4

To stop the polling entirely, click

Stop

.

Connection Status Button

On the Router Status screen in the Internet Port pane, click the

Connection Status

button to

view connection status information.

Figure 6. View connection status information

The Release button returns the status of all items to 0. The Renew button refreshes the

items. The Close Window button closes the Connection Status screen.

IP Address

. The IP address that is assigned to the router.

Subnet Mask

. The subnet mask that is assigned to the router.

Default Gateway

. The IP address for the default gateway that the router communicates with.

DHCP Server

. The IP address for the Dynamic Host Configuration Protocol server that

provides the TCP/IP configuration for all the computers that are connected to the router.

DNS Server

. The IP address of the Domain Name Service server that provides translation of

network names to IP addresses.

Lease Obtained

. The date and time when the lease was obtained.

Lease Expires

. The date and time that the lease expires.

Administration

67

N600 Wireless Dual Band Gigabit Router WNDR3700v4

Wireless Settings (2.4 GHz and 5 GHz)

The following settings are displayed:

Name (SSID

). The wireless network name (SSID) that the router uses. The default name for

5 GHz ends in -5G to distinguish it from the 2.4-GHz network.

Region

. The geographic region where the router is being used. It might be illegal to use the

wireless features of the router in some parts of the world.

Channel

. Identifies the operating channel of the wireless port being used. The default

channel is Auto. When Auto is selected, the router finds the best operating channel available.

If you notice interference from nearby devices, you can select a different channel. Channels

1, 6, and 11 do not interfere with each other.

Mode

. Indicates the wireless communication mode: Up to 54 Mbps, Up to 217 Mbps

(default), or Up to 1300 Mbps.

Wireless AP

. Indicates whether the radio feature of the router is enabled. If this feature is not

enabled, the Wireless LED on the front panel is off.

Broadcast Name

. Indicates whether the router is broadcasting its SSID.

Wireless Isolation

. Select this check box only if you want to prevent wireless connections to

the router.

Wi-Fi Protected Setup

. Indicates whether Wi-Fi Protected Setup is configured for this

network.

Administration

68

N600 Wireless Dual Band Gigabit Router WNDR3700v4

View Logs of Web Access or Attempted Web Access

The log is a detailed record of the websites you have accessed or attempted to access. Up to

256

entries are stored in the log. Log entries appear only when keyword blocking is enabled

and no log entries are made for the trusted user.

Select

Advanced > Administration > Logs

. The Logs screen displays.

The log screen shows the following information:

•

Date and time

. The date and time the log entry was recorded.

•

Source IP

. The IP address of the initiating device for this log entry.

•

Target address

. The name or IP address of the website or news group visited or to which

access was attempted.

•

Action

. Whether the access was blocked or allowed.

To refresh the log screen, click the

Refresh

button.

To clear the log entries, click the

Clear Log

button.

To email the log immediately, click the

Send Log

button.

Administration

69

N600 Wireless Dual Band Gigabit Router WNDR3700v4

Manage the Configuration File

The configuration settings of the router are stored within the router in a configuration file. You

can back up (save) this file to your computer, restore it, or reset it to the factory default

settings.

Back Up Settings



To back up the router’s configuration settings:

1.

Select

Advanced > Administration >

Backup Settings

to display the following screen:

2.

Click

Back Up

to save a copy of the current settings.

3.

Choose a location to store the .cfg file that is on a computer on your network.

Restore Configuration Settings



To restore configuration settings that you backed up:

1.

Enter the full path to the file on your network or click the

Browse

button to find the file.

2.

When you have located the .cfg file, click the

Restore

button to upload the file to the router.

Upon completion, the router reboots.

WARNING!

Do not interrupt the reboot process.

Erase

Under some circumstances, you might want to erase the configuration and restore the factory

settings. For example, you might want to do this if you move the router to a different network.

You can use the Restore Factory Settings button on the router (see

Factory Settings

on

page

109), or you can click the

Erase

button in this screen.

Erase sets the user name to admin, the password to password, and the LAN IP address to

192.168.1.1, and enables the router’s DHCP.

Administration

70

N600 Wireless Dual Band Gigabit Router WNDR3700v4

Set Password

This feature allows you to change the default password that is used to log in to the router with

the user name admin.

This is not the same as changing the password for wireless access. The label on the bottom

of your router shows your unique wireless network name (SSID) and password for wireless

access (see

Types of Logins and Access

on page

15).



To set the password for the user name admin:

1.

Select

Advanced > Administration > Set Password

.

2.

Type the old password and type the new password twice in the fields on this screen.

3.

If you want to be able to recover the password, select the

Enable Password Recovery

check box.

4.

Click

Apply

so that your changes take effect.

Password Recovery

NETGEAR recommends that you enable password recovery if you change the password for

the router’s user name of admin. Then if you forget the password, you can recover it. This

recovery process is supported in Internet Explorer, Firefox, and Chrome browsers, but not in

the Safari browser.



To set up password recovery:

1.

Select the

Enable Password Recovery

check box.

2.

Select two security questions and provide answers to them.

3.

Click

Apply

to save your changes.

When you use your browser to access the router, the login window displays. If password

recovery is enabled, when you click Cancel, the password recovery process starts. You can

then enter the saved answers to the security questions to recover the password.