Page 51 / 115 Scroll up to view Page 46 - 50
Storage
51
N600 Wireless Dual Band Gigabit Router WNDR3700v4
Add or Edit a Network Folder
1.
Select
Basic > ReadySHARE
, and click
Edit
.
2.
Specify the changes that you want to make:
To add a folder, click
Create Network Folder
.
To edit a folder, select its radio button and then click
Edit
.
3.
You can use this screen to select a folder, change the share name, or change the read
access or write access from All – no password to admin.
The user name (account name) for All – no password is guest. The password for admin is
the same one that is used to log in to the router. By default, it is password.
4.
Click
Apply
for your changes to take effect.
Page 52 / 115
Storage
52
N600 Wireless Dual Band Gigabit Router WNDR3700v4
Storage Advanced Settings
You can set up the device name, workgroups, and network folders for your USB device.
To go to USB Storage (Advanced Settings):
On the USB Settings screen, click the
Edit
button to display the following screen:
You can use this screen to specify access to the USB storage device.
Network Device Name
. The default is readyshare. This is the name used to access the
USB device connected to the router.
Workgroup
. If you are using a Windows workgroup rather than a domain, the workgroup
name is displayed here. The name works only in an operating system that supports
NetBIOS, such as Microsoft Windows.
Access Method
. The access methods are described here.
Network Connection
. Enabled by default, this connection allows all users on the LAN to
have access to the USB drive.
HTTP
. Enabled by default. You can type
to
access the USB drive.
HTTP (via Internet)
. Disabled by default. If you enable this setting, remote users can
type
http://<
public IP address
/shares>
(for example,
) or a
URL domain name to access the USB drive over the Internet. This setting supports file
downloading only.
FTP
. Disabled by default.
FTP (via Internet)
. Disabled by default. If you enable this setting, remote users can
access the USB drive through FTP over the Internet. This setting supports both
downloading and uploading of files.
Page 53 / 115
Storage
53
N600 Wireless Dual Band Gigabit Router WNDR3700v4
Available Network Folders
You might need to scroll down to view this section of the screen:
Share Name
. If only one device is connected, the default share name is USB_Storage.
You can click the name shown, or you can type it in the address field of your web browser.
If Not Shared is shown, the default share has been deleted and no other share for the
root folder exists. Click the link to change this setting.
Read Access
and
Write Access
. Shows the permissions and access controls on the
network folder: All - no password (the default) allows all users to access the network
folder. The password for admin is the same one that you use to log in to the router.
Folder Name
. Full path of the network folder.
Volume Name
. Volume name from the USB storage device.
Total Space
and
Free Space
. Shows the current utilization of the storage device.
Safely Remove a USB Drive
To remove a USB device safely, select
Storage > Basic Settings
, and click the
Safely
Remove USB Drive
button. This takes the drive offline.
Media Server
By default, the router is set up to act as a ReadyDLNA media server. This setting lets you
view movies and photos on DLNA/UPnP AV–compliant media players, such as Xbox360,
Playstation, and NETGEAR’s Digital Entertainer Live.
To view these settings, select
Advanced > USB Storage > Media Server
.
By default the Enable Media Server check box and the Automatic (when new files are added)
radio button are selected. When these options are selected, the router scans for media files
whenever new files are added to the ReadySHARE USB hard drive.
Page 54 / 115
Storage
54
N600 Wireless Dual Band Gigabit Router WNDR3700v4
Specify Approved USB Devices
For more security, you can set up the router to share approved USB devices only. You can
access this feature from the Advanced Setup menu on the Advanced tab.
To set up approved USB devices:
1.
Select
Advanced > Advanced Setup > USB Settings
. The following screen displays.
2.
Click the
Approved Devices
button. The USB Drive Approved Devices screen displays:
This screen shows the approved USB devices and the available USB devices. You can
remove or add approved USB devices.
3.
To add an approved USB device, select it from the Available USB Devices list and click
Add
.
4.
Select the
Allow only approved devices
check box.
5.
Click
Apply
so that your change takes effect.
If you want to work with another USB device, first click the
Safely Remove USB Device
button for the currently connected USB device. Connect the other USB device and repeat this
process.
Page 55 / 115
Storage
55
N600 Wireless Dual Band Gigabit Router WNDR3700v4
Connect to the USB Drive from a Remote Computer
To connect to the USB drive from remote computers with a web browser, use the router’s
Internet port IP address. If you are using Dynamic DNS, you can type the DNS name rather
than the IP address. You can view the router’s Internet IP address from the dashboard on the
Basic Home screen or the Advanced Home screen.
Access the Router USB Drive Remotely Using FTP
To connect to the router’s USB drive using a web browser:
1.
Connect to the router by typing
ftp://
and the Internet port IP address in the address
field of Internet Explorer or Netscape Navigator. For example:
If you are using Dynamic DNS, you can type the DNS name rather than the IP address.
2.
Type the account name and password for the account that has access rights to the USB
drive. The user name (account name) for All – no password is
guest
.
3.
The directories of the USB drive that your account has access to display. For example, you
could see: share/partition1/directory1. You can now read and copy files from the USB
directory.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top