1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. MR814v3
    5. /
  5. 10
Page 46 / 162 Scroll up to view Page 41 - 45
Reference Manual for the MR814 v3 Cable/DSL Wireless Router
4-6
Wireless Configuration
202-10039-01
Advanced Wireless Settings
To configure the advanced wireless settings of your firewall, click the Wireless Setup link in the
Advanced section of the main menu of the browser interface. The Wireless Settings menu will
appear, as shown below.
Figure 4-3:
Advanced Wireless Settings menu
•
Allow Broadcast of Name (SSID).
If you disable broadcast of the SSID, only devices that
have the correct SSID can connect. Disabling SSID broadcast nullifies the wireless network
‘discovery’ feature of some products such as Windows XP.
•
Enable Wireless Access Point.
If you disable the wireless access point, wireless devices
cannot connect to the MR814 v3.
•
Wireless Card Access List.
When the Trusted PCs Only radio button is selected, the MR814
v3 checks the MAC address of the wireless station and only allows connections to computers
identified on the trusted computers list.
Page 47 / 162
Reference Manual for the MR814 v3 Cable/DSL Wireless Router
Wireless Configuration
4-7
202-10039-01
Information to Gather Before Changing Basic Wireless Settings
Before customizing your wireless settings, print this form and record the following information. If
you are working with an existing wireless network, the person who set up or is responsible for the
network will be able to provide this information. Otherwise, you will choose the settings for your
wireless network. Either way, record the settings for your wireless network in the spaces below.
•
Wireless Network Name (SSID)
:
______________________________
The SSID, identifies
the wireless network. You can use up to 32 alphanumeric characters. The SSID
is
case
sensitive. The SSID in the wireless adapter card must match the SSID of the router. In some
configuration utilities (such as in Windows XP), the term “wireless network name” is used
instead of SSID.
•
If WEP Authentication is Used.
Circle one:
Open System
,
Shared Key, or Auto
.
Note:
If you select Shared Key, the other devices in the network will not connect unless they
are set to Shared Key as well and are configured with the correct key.
–
WEP Encryption key size
. Choose one:
64-bit
or
128-bit
. Again, the encryption key size
must be the same for the wireless adapters and the router.
–
Data Encryption (WEP) Keys
. There are two methods for creating WEP data encryption
keys. Whichever method you use, record the key values in the spaces below.
•
Passphrase method
. ______________________________
These characters
are
case
sensitive. Enter a word or group of printable characters and click the Generate Keys
button. Not all wireless devices support the passphrase method.
•
Manual method
. These values
are not
case sensitive. For 64-bit WEP, enter 10 hex
digits (any combination of 0-9 or a-f). For 128-bit WEP, enter 26 hex digits.
Key 1: ___________________________________
Key 2: ___________________________________
Key 3: ___________________________________
Key 4: ___________________________________
Note
: Key values and key identities (for example Key 1, Key 2, etc.) must match on all
wireless devices. However, not all wireless configuration utilities identify the keys in the
same way. For example, Windows XP Key 0 corresponds to Key 1 in most other products.
Page 48 / 162
Reference Manual for the MR814 v3 Cable/DSL Wireless Router
4-8
Wireless Configuration
202-10039-01
•
If WPA-PSK Authentication is Used.
–
Passphrase
: ______________________________
These characters
are
case sensitive.
Enter a word or group of printable characters. When you use WPA-PSK, the other devices
in the network will not connect unless they are set to WPA-PSK as well and are configured
with the correct Passphrase.
Use the procedures described in the following sections to configure the MR814 v3. Store this
information in a safe place.
How to Set Up and Test Basic Wireless Connectivity
Follow the instructions below to set up and test basic wireless connectivity. Once you have
established basic wireless connectivity, you can enable security settings appropriate to your needs.
1.
Log in to the MR814 v3 firewall at
with its default user name of
admin
and default password of
password
, or using whatever LAN address and password you
have set up.
2.
Click
Wireless Settings
in the main menu of the MR814 v3 firewall.
Figure 4-4:
Wireless Settings menu
Note:
If you use a wireless computer to configure WPA settings, you will be
disconnected when you click Apply. Reconfigure your wireless adapter to match the
new settings or access the router from a wired computer to make any further changes.
Page 49 / 162
Reference Manual for the MR814 v3 Cable/DSL Wireless Router
Wireless Configuration
4-9
202-10039-01
3.
Choose a suitable descriptive name for the wireless network name (SSID). In the SSID box,
enter a value of up to 32 alphanumeric characters. The default SSID is NETGEAR.
Note:
The SSID is case sensitive; NETGEAR is not the same as nETgear. Also, the SSID of
any wireless access adapters must match the SSID you configure in the MR814 v3 Cable/DSL
Wireless Router. If they do not match, you will not get a wireless connection to the MR814 v3.
4.
Set the Region. Select the region in which the wireless interface will operate.
5.
Set the Channel. The default channel is 11.
This field determines which operating frequency will be used. It should not be necessary to
change the wireless channel unless you notice interference problems with another nearby
wireless router or access point. Select a channel that is not being used by any other wireless
networks within several hundred feet of your firewall and at least 5 channel positions from the
others in use. For more information on the wireless channel frequencies please refer to
“Wireless Channels” on page D-2
.
6.
For initial configuration and test, leave the Wireless Card Access List set to “Everyone” and
the Encryption Strength set to “Disabled.”
7.
Click
Apply
to save your changes.
8.
Configure and test your computers for wireless connectivity.
Program the wireless adapter of your computers to have the same SSID and channel that you
configured in the router. Check that they have a wireless link and are able to obtain an IP
address by DHCP from the firewall.
Warning:
The Network Name (SSID) is case sensitive. If NETGEAR is the Network Name
(SSID) in your router, you must enter NETGEAR in your computer's wireless settings.
Entering nETgear will not work.
Once your computers have basic wireless connectivity to the firewall, then you can configure the
advanced wireless security functions of the firewall.
Note:
If you are configuring the firewall from a wireless computer and you change the
firewall’s SSID, channel, or security settings, you will lose your wireless connection
when you click on Apply. You must then change the wireless settings of your computer
to match the firewall’s new settings.
Page 50 / 162
Reference Manual for the MR814 v3 Cable/DSL Wireless Router
4-10
Wireless Configuration
202-10039-01
How to Configure WEP
To configure WEP data encryption, follow these steps:
1.
Log in to the MR814 v3 firewall at
with its default user name of
admin
and default password of
password
, or using whatever LAN address and password you
have set up.
2.
Click
Wireless Settings
in the main menu of the MR814 v3 firewall.
3.
From the Security Options menu, select
WEP
. The WEP options display.
Figure 4-5.
Wireless Settings encryption menu
Note:
If you use a wireless computer configure WEP settings, you will be disconnected
when you click on Apply. You must then either configure your wireless adapter to match
the router WEP settings or access the router from a wired computer to make any further
changes.

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top