1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. MR814v3
    5. /
  5. 13
Page 61 / 162 Scroll up to view Page 56 - 60
Reference Manual for the MR814 v3 Cable/DSL Wireless Router
Content Filtering
5-7
202-10039-01
Log action buttons are described in
Table 5-2
Configuring E-Mail Alert and Web Access Log Notifications
In order to receive logs and alerts by E-mail, you must provide your E-mail information in the
E-Mail menu, shown below:
Figure 5-6:
Email menu
Table 5-2.
Log action buttons
Field
Description
Refresh
Click this button to refresh the log screen.
Clear Log
Click this button to clear the log entries.
Send Log
Click this button to email the log immediately.
Page 62 / 162
Reference Manual for the MR814 v3 Cable/DSL Wireless Router
5-8
Content Filtering
202-10039-01
•
Turn e-mail notification on
Check this box if you wish to receive e-mail logs and alerts from the router.
•
Your outgoing mail server
Enter the name of your ISP’s outgoing (SMTP) mail server (such as mail.myISP.com). You
may be able to find this information in the configuration menu of your e-mail program. If you
leave this box blank, log and alert messages will not be sent via e-mail.
•
Send to this e-mail address
Enter the e-mail address to which logs and alerts are sent. This e-mail address will also be used
as the From address. If you leave this box blank, log and alert messages will not be sent via
e-mail.
You can specify that logs are automatically sent to the specified e-mail address with these options:
•
Send alert immediately
Check this box if you would like immediate notification of attempted access to a blocked site.
•
Send logs according to this schedule
Specifies how often to send the logs: Hourly, Daily, Weekly, or When Full.
–
Day for sending log
Specifies which day of the week to send the log. Relevant when the log is sent weekly or
daily.
–
Time for sending log
Specifies the time of day to send the log. Relevant when the log is sent daily or weekly.
If the Weekly, Daily or Hourly option is selected and the log fills up before the specified
period, the log is automatically e-mailed to the specified e-mail address. After the log is sent,
the log is cleared from the router’s memory. If the router cannot e-mail the log file, the log
buffer may fill up. In this case, the router overwrites the log and discards its contents.
The MR814 v3 router uses the Network Time Protocol (NTP) to obtain the current time and date
from one of several Network Time Servers on the Internet. In order to localize the time for your
log entries, you must specify your Time Zone:
•
Time Zone
Select your local time zone. This setting will be used for the blocking schedule and for
time-stamping log entries.
•
Daylight Savings Time
Check this box if your time zone is currently under daylight savings time.
Page 63 / 162
Maintenance
6-1
202-10039-01
Chapter 6
Maintenance
This chapter describes how to use the maintenance features of your MR814 v3 Cable/DSL
Wireless Router. These features can be found by clicking on the Maintenance heading in the Main
Menu of the browser interface.
Viewing Router Status Information
The Router Status menu provides a limited amount of status and usage information. From the
Main Menu of the browser interface, click on Maintenance, then select System Status to view the
System Status screen, shown below.
Figure 6-1:
Router Status screen
Page 64 / 162
Reference Manual for the MR814 v3 Cable/DSL Wireless Router
6-2
Maintenance
202-10039-01
This screen shows the following parameters:
Table 6-1.
Router Status Fields
Field
Description
Account Name
This field displays the Host Name assigned to the router.
Firmware Version
This field displays the router firmware version.
Internet Port
These parameters apply to the Internet (WAN) port of the router.
MAC Address
This field displays the Media Access Control address being used by the
Internet (WAN) port of the router.
IP Address
This field displays the IP address being used by the Internet (WAN) port
of the router. If no address is shown, the router cannot connect to the
Internet.
IP Subnet Mask
This field displays the IP Subnet Mask being used by the Internet (WAN)
port of the router.
DHCP
If set to None, the router is configured to use a fixed IP address on the
WAN.
If set to Client, the router is configured to obtain an IP address
dynamically from the ISP.
LAN Port
These parameters apply to the Local (WAN) port of the router.
MAC Address
This field displays the Media Access Control address being used by the
LAN port of the router.
IP Address
This field displays the IP address being used by the Local (LAN) port of
the router. The default is 192.168.0.1
IP Subnet Mask
This field displays the IP Subnet Mask being used by the Local (LAN)
port of the router. The default is 255.255.255.0
DHCP
Identifies if the router’s built-in DHCP server is active for the LAN
attached devices.
Wireless Port
These parameters apply to the Wireless port of the router.
MAC Address
This field displays the Media Access Control address being used by the
Wireless port of the router.
Name (SSID)
This field displays the wireless network name (SSID) being used by the
wireless port of the router. The default is Wireless.
Region
This field displays the geographic region where the router being used. It
may be illegal to use the wireless features of the router in some parts of
the world.
Channel
Identifies if the channel the wireless port is using. See
“Wireless
Channels” on page D-2
for the frequencies used on each channel.
Page 65 / 162
Reference Manual for the MR814 v3 Cable/DSL Wireless Router
Maintenance
6-3
202-10039-01
Click on the “Show Connection Status” button to display the connection status, as shown below.
Figure 6-2:
Connection Status screen
This screen shows the following statistics:.
Table 6-2:
Connection Status Items
Item
Description
IP Address
The WAN (Internet) IP Address assigned to the router.
Subnet Mask
The WAN (Internet) Subnet Mask assigned to the router.
Default Gateway
The WAN (Internet) default gateway the router communicates with.
DHCP Server
The IP address of the DHCP server which provided the IP configuration addresses.
DNS Server
The IP address of the DNS server which provides network name to IP address
translation.
Lease Obtained
When the DHCP lease was obtained.
Lease Expires
When the DHCP lease was expires.
Release
Click the Release button to release the DHCP lease.
Renew
Click the Renew button to renew the DHCP lease.

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top