1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. MR814v3
    5. /
  5. 8
Page 36 / 162 Scroll up to view Page 31 - 35
Reference Manual for the MR814 v3 Cable/DSL Wireless Router
3-12
Connecting the Router to the Internet
202-10039-01
How to Bypass the Configuration Assistant
1.
When the router is in the factory default state, type
in the address field of your browser, then click
Enter
.
When the router is in the factory default state, a user name and password are not required.
2.
The browser will then display the MR814 v3 settings home page shown in
“Login result:
MR814 v3 home page” on page 3-11
.
If you do not click Logout, the router will wait 5 minutes after there is no activity before it
automatically logs you out.
Page 37 / 162
Reference Manual for the MR814 v3 Cable/DSL Wireless Router
Connecting the Router to the Internet
3-13
202-10039-01
How to Manually Configure Your Internet Connection
You can manually configure your router using the menu below, or you can allow the Setup Wizard
to determine your configuration as described in the previous section.
Figure 3-10:
Browser-based configuration Basic Settings menus
You can manually configure the router using the Basic Settings menu shown in
Figure 3-10
using
these steps:
1.
Connect to the router by typing
in the address field of your
browser, then click
Enter
.
ISP
Does
Not
Require Login
ISP
Does
Require Login
Page 38 / 162
Reference Manual for the MR814 v3 Cable/DSL Wireless Router
3-14
Connecting the Router to the Internet
202-10039-01
2.
For security reasons, the router has its own user name and password. When prompted, enter
admin
for the router user name and
password
for the router password, both in lower case
letters.
3.
Click
Basic Settings
on the Setup menu.
4.
If your Internet connection does not require a login, click No at the top of the Basic Settings
menu and fill in the settings according to the instructions below. If your Internet connection
does require a login, click Yes, and skip to step 3.
a.
Enter your Account Name (may also be called Host Name) and Domain Name.
These parameters may be necessary to access your ISP’s services such as mail or news
servers.
b.
Internet IP Address:
If your ISP has assigned you a permanent, fixed (static) IP address for your computer,
select “Use static IP address”. Enter the IP address that your ISP assigned. Also enter the
netmask and the Gateway IP address. The Gateway is the ISP’s router to which your router
will connect.
c.
Domain Name Server (DNS) Address:
If you know that your ISP does not automatically transmit DNS addresses to the router
during login, select “Use these DNS servers” and enter the IP address of your ISP’s
Primary DNS Server. If a Secondary DNS Server address is available, enter it also.
Note:
If you enter an address here, restart the computers on your network so that these
settings take effect.
d.
Gateway’s MAC Address:
This section determines the Ethernet MAC address that will be used by the router on the
Internet port. Some ISPs will register the Ethernet MAC address of the network interface
card in your computer when your account is first opened. They will then only accept
traffic from the MAC address of that computer. This feature allows your router to
masquerade as that computer by “cloning” its MAC address.
To change the MAC address, select “
Use this Computer’s MAC address
.” The router
will then capture and use the MAC address of the computer that you are now using. You
must be using the one computer that is allowed by the ISP. Or, select “Use this MAC
address” and enter it.
e.
Click
Apply
to save your settings.
5.
If your Internet connection does require a login, fill in the settings according to the instructions
below. Select Yes if you normally must launch a login program such as Enternet or WinPOET
in order to access the Internet.
Page 39 / 162
Reference Manual for the MR814 v3 Cable/DSL Wireless Router
Connecting the Router to the Internet
3-15
202-10039-01
Note:
After you finish setting up your router, you will no longer need to launch the ISP’s login
program on your computer in order to access the Internet. When you start an Internet
application, your router will automatically log you in.
a.
Select you Internet service provider from the drop-down list.
Figure 3-11:
Basic Settings ISP list
Note:
Not all ISPs are listed here. The ones on this list have special requirements.
b.
The screen will change according to the ISP settings requirements of the ISP you select.
c.
Fill in the parameters for your Internet service provider.
d.
Click
Apply
to save your settings. Click the Test button to verify you have Internet access.
Using the Smart Setup Wizard
You can use the Smart Setup Wizard to assist with manual configuration or to verify the Internet
connection. The Smart Setup Wizard is not the same as the Smart Wizard configuration assistant
(as illustrated in
Figure 3-5
) that only appears when the router is in its factory default state. After
you configure the router, the Smart Wizard configuration assistant will not appear again.
To use the Smart Setup Wizard to assist with manual configuration or to verify the Internet
connection settings, follow this procedure.
1.
Connect to the router by typing
in the address field of your
browser, then click
Enter
.
Page 40 / 162
Reference Manual for the MR814 v3 Cable/DSL Wireless Router
3-16
Connecting the Router to the Internet
202-10039-01
2.
For security reasons, the router has its own user name and password. When prompted, enter
admin
for the router user name and
password
for the router password, both in lower case
letters. To change the password, see
“Changing the Administrator Password” on page 6-8
Note:
The router user name and password are not the same as any user name or password you
may use to log in to your Internet connection.
Once you have entered your user name and password, your Web browser should find the
MR814 v3 router and display the home page as shown in
“Login result: MR814 v3 home
page” on page 3-11
.
3.
Click
Setup Wizard
on the upper left of the main menu.
4.
Click
Next
to proceed. Input your ISP settings, as needed.
5.
At the end of the Setup Wizard, click the
Test
button to verify your Internet connection. If you
have trouble connecting to the Internet, use the Troubleshooting Tips
“Troubleshooting Tips”
on page 3-8
to correct basic problems, or refer to
Chapter 8, “Troubleshooting
.”
The topics below describe each of the various options the Smart Wizard can detect. Use this
information to assist you with filling in the menus.
NETGEAR product registration, support, and documentation
Register your product at
. Registration is required before
you can use our telephone support service.
Product updates and web support are always available by going to:
.
Documentation is available on the CD and at
.
When the router is connected to the Internet, click the Knowledge Base or the Documentation link
under the Web Support menu to view support information or the documentation for the router.

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top