Page 346 / 414 Scroll up to view Page 341 - 345
Monitor System Access and Performance
346
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 204.
The following table explains the fields of the Router Status screen:
Table 84.
Router Status screen information
Item
Description
System Info
System Name
The NETGEAR system name.
Firmware Version
The currently installed firmware version.
Page 347 / 414
Monitor System Access and Performance
347
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Router Statistics Screen
To view the Router Statistics screen:
1.
Select
Monitoring > Router Status
. The Router Status screen displays (see the
previous figure).
2.
Click the
Show Statistics
option arrow
in the upper right of the Router Status screen. The
Router Statistics screen displays:
LAN (VLAN) Information
For each of the LAN ports, the screen shows the IP address and subnet mask. For more detailed information,
see
Table 86
on page 350.
LAN IPv4/IPv6 Information
MAC Address
The MAC address of the wireless VPN firewall.
IPv6 Address
The IPv6 address that is assigned to the wireless VPN firewall. For information
about configuring the IPv6 address, see
Configure the IPv6 Internet
Connection and WAN Settings
on page 35.
DHCP Server
The status of the IPv4 DHCP server (Enabled or Disabled). For information
about configuring the IPv4 DHCP server, see
Configure a VLAN Profile
on
page 56.
DHCP Relay
The status of the IPv4 DHCP relay (Enabled or Disabled). For information
about configuring the IPv4 DHCP relay, see
Configure a VLAN Profile
on
page 56.
DHCPv6 Server
The status of the DHCPv6 server (Enabled or Disabled). For information about
configuring the DHCPv6 server, see
Manage the IPv6 LAN
on page 70.
Wireless Information
Wireless Status
The status of the wireless access point (Enabled or Disabled).
WAN Information
WAN (IPv4)
The screen shows the IPv4 address, subnet mask, gateway, and status of the
port (UP or Down). For more detailed information, see
Table 86
on page 350.
WAN (IPv6)
The screen shows the IPv6 address, gateway, and status of the port (UP or
Down). For more detailed information, see
Table 86
on page 350.
Table 84.
Router Status screen information (continued)
Item
Description
Page 348 / 414
Monitor System Access and Performance
348
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 205.
The following table explains the fields of the Router Statistics screen.
To change the poll interval period, enter a new value (in seconds) in the Poll Interval field,
and then click
Set interval
. To stop polling, click
Stop
.
Detailed Status Screen
To view the Detailed Status screen, select
Monitoring > System Status > Detailed Status
.
The Detailed Status screen displays:
Table 85.
Router Statistics screen information
Item
Description
System up Time. The period since the last time that the wireless VPN firewall was started up.
Router Statistics
For the broadband (WAN) interface and for all LAN interfaces combined, the following statistics are
displayed:
Tx Pkts
The number of packets transmitted on the port in bytes.
Rx Pxts
The number of packets received on the port in bytes.
Collisions
The number of signal collisions that have occurred on the port. A collision occurs
when the port attempts to send data at the same time as a port on the other router or
computer that is connected to this port.
Tx B/s
The number of bytes transmitted per second on the port.
Rx B/s
The number of bytes received per second on the port.
Up Time
The period that the port has been active since it was restarted.
Page 349 / 414
Monitor System Access and Performance
349
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 206.
Page 350 / 414
Monitor System Access and Performance
350
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
The following table explains the fields of the Detailed Status screen:
Table 86.
Detailed Status screen information
Item
Description
LAN Port Configuration
The following fields are shown for each of the LAN ports.
VLAN Profile
The name of the VLAN profile that you assigned to this port on the LAN Setup screen
(see
Assign and Manage VLAN Profiles
on page 53). If the VLAN is not enabled on
this port, the default profile (with VLAN ID 1) is assigned automatically.
VLAN ID
The VLAN ID that you assigned to this port on the Add VLAN Profile screen (see
Configure a VLAN Profile
on page 56). If the default VLAN profile is used, the VLAN ID
is 1, which means that all tagged and untagged traffic can pass on this port.
MAC Address
The MAC address for this port.
Note:
All LAN ports that are part of the default VLAN share the same MAC address
unless you have specified that each VLAN needs to be assigned a unique MAC
address (see
Configure VLAN MAC Addresses and LAN Advanced Settings
on
page 61).
Note:
LAN ports that have an IPv4 address that differs from the default VLAN can
share the same MAC address as the default VLAN.
Note:
LAN port 8 can be assigned as the DMZ port, in which case its VLAN ID is 4094.
For information about configuring the DMZ port, see
Enable and Configure the DMZ
Port for IPv4 and IPv6 Traffic
on page 82.
IP Address
The IP address for this port. If the port is part of the default VLAN, the IP address is the
default LAN IP address (192.168.1.1). For information about configuring VLAN
profiles, see
Configure a VLAN Profile
on page 56.
Subnet Mask
The subnet mask for this port. If the port is part of the default VLAN, the subnet mask
is the default LAN IP subnet mask (255.255.255.0). For information about configuring
VLAN profiles, see
Configure a VLAN Profile
on page 56.
DHCP Status
The status of the IPv4 DHCP server for the VLAN (Enabled or Disabled). For
information about enabling DHCP for VLANs, see
Configure a VLAN Profile
on
page 56.
WAN Configuration
MAC Address
The default MAC address for the port or the MAC address that you have specified on
the Broadband Advanced Options screen for the port. For information about
configuring the MAC address, see
Configure Advanced WAN Options and Other Tasks
on page 47.
IP Address
The IPv4 address and subnet mask of the WAN port. For information about configuring
the IPv4 address of the WAN port, see
Configure the IPv4 Internet Connection and
WAN Settings
on page 26.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top