Page 121 / 400 Scroll up to view Page 116 - 120
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands
8-53
202-10088-01, March 2005
Format
no vlan port pvid all
Mode
Global Config
vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to enabled. If tagging
is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is transmitted as
untagged frames. The ID is a valid VLAN identification number.
Format
vlan port tagging all <
1-4094>
Mode
Global Config
no vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to disabled. If tagging
is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN identification
number.
Format
no vlan port tagging all
Mode
Global Config
vlan protocol group
This command adds protocol-based VLAN group to the system. The <
groupName>
is a character string of 1 to 16
characters.
When it is created, the protocol group will be assigned a unique number that will be used to identify the
group in subsequent commands.
Format
vlan protocol group
<groupname>
Mode
Global Config
vlan protocol group add protocol
This command adds the <protocol> to the protocol-based VLAN identified by <groupid>. A group may have more than
one protocol associated with it. Each interface and protocol combination can only be associated with one group. If
adding a protocol to a group causes any conflicts with interfaces currently associated with the group, this command will
fail and the protocol will not be added to the group. The possible values for protocol are
ip, arp,
and
ipx
.
Default
none
Format
vlan protocol group add protocol
<groupid> <protocol>
Page 122 / 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-54
Switching Commands
202-10088-01, March 2005
Mode
Global Config
no vlan protocol group add protocol
This command removes the <
protocol>
from this protocol-based VLAN group that is identified by this <
groupid>
.
The possible values for protocol are
ip, arp,
and
ipx
.
Format
no vlan protocol group add protocol
<groupid> <proto-
col>
Mode
Global Config
vlan protocol group remove
This command removes the protocol-based VLAN group that is identified by this <groupid>.
Format
vlan protocol group remove
<groupid>
Mode
Global Config
protocol group
This command attaches a <vlanid> to the protocol-based VLAN identified by <groupid>.
A
group may only be associated with one VLAN at a time, however the VLAN association can be
changed.
The referenced VLAN should be created prior to the creation of the protocol-based VLAN except
when GVRP is expected to create the VLAN.
Default
none
Format
protocol group
<groupid> <vlanid>
Mode
VLAN database
no protocol group
This command removes the <vlanid>
from this protocol-based VLAN group that is identified by
this <
groupid>
.
Format
no protocol group
<groupid> <vlanid>
Mode
VLAN database
Page 123 / 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands
8-55
202-10088-01, March 2005
protocol vlan group
This command adds the physical <
slot/port
>
interface to the protocol-based VLAN identified by <
groupid
>
. A group
may have more than one interface associated with it. Each interface and protocol combination can only be associated
with one group. If adding an interface to a group causes any conflicts with protocols currently associated with the group,
this command will fail and the interface(s) will not be added to the group.
The referenced VLAN should be created prior to the creation of the protocol-based VLAN except
when GVRP is expected to create the VLAN.
Default
none
Format
protocol vlan group
<groupid>
Mode
Interface Config
no protocol vlan group
This command removes the <
interface
>
from this protocol-based VLAN group that is identified by this <
groupid
>
.
If <
all
>
is selected, all ports will be removed from this protocol group.
Format
no protocol vlan group
<groupid>
Mode
Interface Config
protocol vlan group all
This command adds all physical interfaces to the protocol-based VLAN identified by <
groupid
>
. A group may have
more than one interface associated with it. Each interface and protocol combination can only be associated with one
group. If adding an interface to a group causes any conflicts with protocols currently associated with the group, this
command will fail and the interface(s) will not be added to the group.
The referenced VLAN should be created prior to the creation of the protocol-based VLAN except
when GVRP is expected to create the VLAN.
Default
none
Format
protocol vlan group all
<groupid>
Mode
Global Config
no protocol vlan group all
This command removes all interfaces from this protocol-based VLAN group that is identified by
this <groupid>.
Page 124 / 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-56
Switching Commands
202-10088-01, March 2005
Format
no protocol vlan group all
<groupid>
Mode
Global Config
vlan pvid
This command changes the VLAN ID per interface.
Default
1
Format
vlan pvid <
1-4094>
Mode
Interface Config
no vlan pvid
This command sets the VLAN ID per interface to 1.
Format
no vlan pvid
Mode
Interface Config
vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to enabled. If
tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is
transmitted as untagged frames. The ID is a valid VLAN identification number.
Format
vlan tagging <
1-4094>
Mode
Interface Config
no vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to disabled. If
tagging is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN
identification number.
Format
no vlan tagging <
1-4094>
Mode
Interface Config
show vlan
This command displays detailed information, including interface information, for a specific
VLAN. The ID is a valid VLAN identification number
Page 125 / 400
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands
8-57
202-10088-01, March 2005
Format
show vlan
<vlanid>
Mode
Privileged EXEC and User EXEC
VLAN ID
There is a VLAN Identifier (VID) associated with each VLAN.
The range of the VLAN ID is 1 to 4094.
VLAN Name
A string associated with this VLAN as a convenience. It can be
up to 32 alphanumeric characters long, including blanks. The
default is blank. VLAN ID 1 always has a name of `Default`. This
field is optional.
VLAN Type
Type of VLAN, which can be Default, (VLAN ID = 1), a static
(one that is configured and permanently defined), or Dynamic
(one that is created by GVRP registration).
Slot/Port
Valid slot and port number separated by forward slashes. It is pos-
sible to set the parameters for all ports by using the selectors on
the top line.
Current
Determines the degree of participation of this port in this VLAN.
The permissible values are:
Include
- This port is always a member of this VLAN. This is
equivalent to registration fixed in the IEEE 802.1Q standard.
Exclude
- This port is never a member of this VLAN. This is
equivalent to registration forbidden in the IEEE 802.1Q standard.
Autodetect
- Specifies to allow the port to be dynamically regis-
tered in this VLAN via GVRP. The port will not participate in this
VLAN unless a join request is received on this port. This is
equivalent to registration normal in the IEEE 802.1Q standard.
Configured
Determines the configured degree of participation of this port in
this VLAN. The permissible values are:
Include
- This port is always a member of this VLAN. This is
equivalent to registration fixed in the IEEE 802.1Q standard.
Exclude
- This port is never a member of this VLAN. This is
equivalent to registration forbidden in the IEEE 802.1Q standard.
Autodetect
- Specifies to allow the port to be dynamically regis-
tered in this VLAN via GVRP. The port will not participate in this
VLAN unless a join request is received on this port. This is
equivalent to registration normal in the IEEE 802.1Q standard.
Tagging
Select the tagging behavior for this port in this VLAN.
Tagged
- specifies to transmit traffic for this VLAN as tagged
frames.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top