NETGEAR DG632v3 Router Manual PDF (Setup & Configuration Guide)

Page 26 / 132 Scroll up to view Page 21 - 25

Reference Manual for the Model DG632 ADSL Modem Router

3-4

Connecting the Modem to the Internet

Record Your Internet Connection Information

Print this page. Fill in the configuration parameters from your Internet Service Provider (ISP).

ISP Multiplexing Method and Virtual Circuit Number:

The default settings of your DG632

ADSL Modem Router will work fine for most ISPs. However, some ISPs use a specific

Multiplexing Method or a Virtual Circuit Number for either the Virtual Path Identifier (VPI) or

Virtual Channel Identifier (VCI). If your ISP provided you with a specific Multiplexing Method or

VPI/VCI number, then fill in the following:

Multiplexing Method, circle one: LLC-based or VC-based

VPI: ________

A number between 0 and 255. VCI: ___________

A number between 1 and

65535.

ISP Login Name:

The login name and password are case sensitive and must be entered exactly as

given by your ISP. Some ISPs use your full e-mail address as the login name. The Service Name is

not required by all ISPs. If you use a login name and password, then fill in the following:

Login Name: ______________________________

Password: ____________________________

Service Name: _____________________________

Fixed or Static IP Address:

If you have a static IP address, record the following information. For

example, 169.254.141.148 could be a valid IP address.

Fixed or Static Internet IP Address: ______

.______

Modem IP Address: ______

.______

Subnet Mask: ______

.______

ISP DNS Server Addresses:

If you were given DNS server addresses, fill in the following:

Primary DNS Server IP Address: ______

.______

Secondary DNS Server IP Address: ______

.______

Host and Domain Names:

Some ISPs use a specific host or domain name like

CCA7324-A

or

home

. If you did not get host or domain names, use the following examples as a guide:

•

If your main e-mail account with your ISP is

[email protected]

, then use

aaa

as your host name.

Your ISP might call this your account, user, host, computer, or system name.

•

If your ISP’s mail server is

mail.xxx.yyy.com

, then use

xxx.yyy.com

as the domain name.

ISP Host Name: _________________________

ISP Domain Name: _______________________

Page 27 / 132

Reference Manual for the Model DG632 ADSL Modem Router

Connecting the Modem to the Internet

3-5

Connecting the DG632 to Your Network

This section provides instructions for connecting the DG632 modem router to your network.

Note:

The Resource CD included with your modem contains an animated Installation Assistant to

help you through this procedure.

How to Connect the Modem

There are three steps to connecting your firewall:

1.

Connect the modem to your ADSL line.

2.

Connect the modem to the computers on your network.

3.

Log in to the modem.

4.

Connect to the Internet.

Follow the steps below to connect your modem to your network. Before you begin, locate the

ADSL configuration information from your Internet Service Provider (ISP).

1. C

ONNECT

THE

DG632

TO

THE

ADSL L

INE

.

a.

You need to install a filter on every telephone or device that shares the same phone

number as your ADSL modem. Select the filter that came with your modem.

Figure 3-3:

ADSL microfilters

Note:

If you purchased the DG632 in a country where the filter is not included, you must

acquire one.

Phone

DSL

Line

One-Line Filter

Two-Line Filter

Splitter

With Splitter

Page 28 / 132

Reference Manual for the Model DG632 ADSL Modem Router

3-6

Connecting the Modem to the Internet

b.

Two-Line Filter Example

. Insert the two-line filter into the phone outlet and connect the

phone to the phone line connector (

A)

.

Figure 3-4:

Connecting an ADSL microfilter and phone

Note:

To use a one-line filter with a separate splitter, insert the splitter into the phone

outlet, connect the one-line filter to the splitter, and connect the phone to the filter.

2. C

ONNECT

THE

DG632

TO

THE

I

NTERNET

.

Note:

Improperly connecting a filter to your

DG632 modem router

will block your ADSL

connection.

a.

Turn off your computer.

b.

Connect the ADSL port of the DG632 to the ADSL port (

B)

of the two-line filter.

Figure 3-5:

Connecting DG632 modem router to an ADSL microfilter and phone

3KRQH

$3,

,INE

A

Phone Line

0HONE

'6/

,INE

B

ADSL Port

Page 29 / 132

Reference Manual for the Model DG632 ADSL Modem Router

Connecting the Modem to the Internet

3-7

c.

Connect the Ethernet cable (

C)

from your DG632’s LAN port to the Ethernet adapter in

your computer.

Note:

To connect the computer using the USB port, please see

“Connecting Your

Computer to the DG632 USB Port Option” on page 3-12

.

Figure 3-6:

Connecting a computer to the DG632 modem router

Note:

The DG632 modem router incorporates Auto Uplink

TM

technology. The Ethernet port

will automatically sense whether the cable plugged into the port should have a 'normal'

connection (for example, connecting to a computer) or an 'uplink' connection (for example,

connecting to a switch or hub). That port will then configure itself to the correct configuration.

This feature also eliminates the need to worry about crossover cables, as Auto Uplink will

accommodate either type of cable to make the right connection.

d.

Connect the power adapter to the modem and plug it in to a power outlet. Verify the

following:

The power light is lit after turning on the modem.

0HONE

$3,

,INE

C

Page 30 / 132

Reference Manual for the Model DG632 ADSL Modem Router

3-8

Connecting the Modem to the Internet

The ADSL link light is solid green, indicating a link has been established to the

ADSL network.

e.

Now, turn on your computer. If software usually logs you in to your Internet connection,

do not run that software or cancel it if it starts automatically.

The Ethernet or USB light is lit for the connected computer.

3.

L

OG

IN

TO

THE

DG632.

Note:

Your computer needs to be configured for DHCP. For instructions on configuring for

DHCP, please see Appendix C in the

Reference Manual

on the

ADSL Modem Router Resource

CD

.

a.

Connect to the modem by typing

http://192.168.0.1

in the address field of Internet

Explorer or Netscape

®

Navigator.

Figure 3-7:

Log in to the modem

A login window opens as shown below:

Figure 3-8:

Login window

b.

When prompted, enter

admin

for the user name and

password

for the password, both in

lower case letters. After logging in, you will see the menu below.

Figure 3-9:

Setup Wizard

or

Rate

Popular NETGEAR Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share