Reference Manual for the Model DG632 ADSL Modem Router

5-2

Using Modem Mode

5.

Follow the instructions below according to the encapsulation method and whether your

Internet connection requires a login. The following methods are available:

•

Internet Connection Requires Login and Uses PPPoE

•

Internet Connection Requires Login and Uses PPPoA

•

Internet Connection Does Not Require a Login

6.

Usually the default ADSL Settings work fine for most ISPs and you can skip this step. If you

have any problems with your connection, check the ADSL Settings. See

“ADSL Settings“ on

page 5-4

for more details.

Internet Connection Requires Login and Uses PPPoE

1.

If your Internet connection

does

require login, select Yes and fill in the settings according to

the instructions below.

Note

: You will no longer need to launch the ISP’s login program on your computer in order to

access the Internet. When you start an Internet application, your modem automatically logs

you in.

2.

Choose PPPoE for the encapsulation method your ISP uses.

3.

Enter the login name (frequently the email address your ISP provided), password, and service

name (if required).

4.

If you want to change the login timeout, enter a new value in minutes. This determines how

long the modem keeps the Internet connection active after there is no Internet activity from the

LAN. Entering an Idle Timeout value of zero means never log out.

5.

The DNS server is used to look up site addresses based on their names.

•

Select “Get Automatically from ISP” if your ISP uses DHCP to assign your IP address.

Your ISP will automatically assign this address.

•

Select “Use These DNS Servers” if your ISP gave you one or two DNS addresses. Type

the primary and secondary addresses.

Internet Connection Requires Login and Uses PPPoA

1.

If your Internet connection

does

require login, select Yes and fill in the settings according to

the instructions below.

Reference Manual for the Model DG632 ADSL Modem Router

Using Modem Mode

5-3

Note

: You will no longer need to launch the ISP’s login program on your computer in order to

access the Internet. When you start an Internet application, your modem automatically logs

you in.

2.

Choose PPPoA for the encapsulation method your ISP uses.

3.

Enter the login name (frequently the email address your ISP provided), and password.

4.

If you want to change the login timeout, enter a new value in minutes. This determines how

long the modem keeps the Internet connection active after there is no Internet activity from the

LAN. Entering an Idle Timeout value of zero means never log out.

5.

Internet IP Address:

•

Select “Get Dynamically from ISP” if your ISP uses DHCP to assign your IP address.

Your ISP will automatically assign these addresses.

•

Select “Use Static IP Address” if your ISP has assigned you a permanent, fixed (static) IP

address. Enter the IP address that your ISP assigned.

6.

The DNS server is used to look up site addresses based on their names.

•

Select “Get Automatically from ISP” if your ISP uses DHCP to assign your IP address.

Your ISP will automatically assign this address.

•

Select “Use These DNS Servers” if your ISP has assigned you DNS server addresses.

Enter the Primary and Secondary DNS server addresses that your ISP provided.

Internet Connection Does Not Require A Login

1.

If your Internet connection does

not

require a login, select No and fill in the settings according

to the instructions below.

2.

Enter your Account Name (may also be called Host Name) and Domain Name.

These parameters may be necessary to access your ISP’s mail or news servers.

3.

Internet IP Address:

•

Select “Get Dynamically from ISP” if your ISP uses DHCP to assign your IP address.

Your ISP will automatically assign these addresses.

•

Select “Use Static IP Address” if your ISP has assigned you a permanent, fixed (static) IP

address. Enter the IP address that your ISP assigned. Also enter the IP Subnet Mask and

the Gateway IP Address. The gateway is the ISP’s modem to which your modem will

connect.

4.

Domain Name Server (DNS) Address:

Reference Manual for the Model DG632 ADSL Modem Router

5-4

Using Modem Mode

•

Select “Get Dynamically from ISP” if your ISP uses DHCP to assign your IP address.

Your ISP will automatically assign this address.

•

If you know that your ISP does not automatically transmit DNS addresses to the modem

during login, select “Use these DNS servers” and enter the IP address of your ISP’s

Primary DNS Server. If a Secondary DNS Server address is available, enter it also.

A DNS server is a host on the Internet that translates Internet names (such as

www.netgear.com) to numeric IP addresses. Typically your ISP transfers the IP address of

one or two DNS servers to your modem during login. If the ISP does not transfer an

address, you must obtain it from the ISP and enter it manually here.

5.

Click Apply to save your settings.

6.

Click the Test button to test your Internet connection.

If the NETGEAR Web site does not appear within one minute, refer to

Chapter 7,

“Troubleshooting

.

ADSL Settings

The default settings of your DG632 ADSL Modem Router will work fine for most ISPs. However,

some ISPs use a specific Multiplexing Method or a Virtual Circuit Number for either the Virtual

Path Identifier (VPI) or Virtual Channel Identifier (VCI).

Note:

The correct country must be selected from the Setup Wizard’s first page for the default

ADSL Settings to work.

If your ISP provided you with a specific Multiplexing Method or VPI/VCI number, then fill in the

following:

1.

Select the ADSL Settings link from the main menu.

2.

For the Multiplexing Method, select LLC-based or VC-based.

3.

Type a number between 0 and 255 for the VPI. The default is 8.

4.

Type a number between 1 and 65535 for the VCI. The default is 35.

5.

Click Apply.

Modem Mode Network Management Information

The DG632 provides a variety of status and usage information which is discussed below.

Reference Manual for the Model DG632 ADSL Modem Router

Using Modem Mode

5-5

Viewing Modem Status and Usage Statistics

From the Main Menu, under Maintenance, select Modem Status to view the screen in

Figure 5-2

.

Figure 5-2:

Modem Status screen

The Modem Status menu provides status and usage information, as described in the following

table.

Table 5-1.

Menu 3.2 - Modem Status Fields

Field

Description

Account Name

The Host Name assigned to the modem in the Basic Settings menu.

Firmware Version

Displays the modem firmware version.

ADSL Port

These parameters apply to the Internet (ADSL) port of the modem.

MAC Address

Displays the Ethernet MAC address being used by the Internet (ADSL)

port of the modem.

IP Address

Displays the IP address being used by the Internet (ADSL) port of the

modem. If no address is shown, the modem cannot connect to the

Internet.

Reference Manual for the Model DG632 ADSL Modem Router

5-6

Using Modem Mode

DHCP

If None, the modem will use a fixed IP address on the ADSL.

If Client, the modem will obtain an IP address dynamically from the ISP

IP Subnet Mask

Displays the IP Subnet Mask being used by the Internet (ADSL) port of

the modem.

Domain Name Server (DNS)

Displays the DNS Server IP addresses being used by the modem. These

addresses are usually obtained dynamically from the ISP.

LAN Port

These parameters apply to the Local (ADSL) port of the modem.

MAC Address

Displays the Ethernet MAC address of the Local (LAN) port.

IP Address

This field displays the IP address being used by the Local (LAN) port of

the modem. The default is 192.168.0.1

DHCP

If OFF, the modem will not assign IP addresses to PCs on the LAN.

If ON, the modem will assign IP addresses to PCs on the LAN.

IP Subnet Mask

This field displays the IP Subnet Mask being used by the Local (LAN) port

of the modem. The default is 255.255.255.0.

Modem

These parameters apply to the Local (WAN) port of the modem.

ADSL Firmware Version

The version of the firmware.

Router Status

The connection status of the modem.

Connect Mode

This field displays the protocol used to connect to your service provider.

When the ADSL link comes up, the connection will be either “Fast” or

“Interleaved”, depending on the way the telephone company has

configured its equipment.

Downstream Speed

The speed at which the modem is receiving data from the ADSL line.

Upstream Speed

The speed at which the modem is transmitting data to the ADSL line.

VPI

The Virtual Path Identifier setting.

VCI

The Virtual Channel Identifier setting.

Table 5-1.

Menu 3.2 - Modem Status Fields

Field

Description