Page 26 / 299
Scroll up to view Page 21 - 25
8.
If the Power LED does not light, press the
Power On/Off
button.
Wait for the WiFi LED
to light solid white.
9.
If the WiFi LED does not light, press the
WiFi On/Off
button
.
10.
Connect a computer to the modem router by one of the following methods:
•
Ethernet cable
. Use an Ethernet cable to connect your computer to a yellow Ethernet LAN port on the
modem router.
The product package contains a yellow Ethernet cable.
Your computer connects to the modem router’s LAN.
•
WiFi
. Connect to the default WiFi network of the modem router:
a.
On your computer or WiFi device, find and select the WiFi network.
The WiFi network name (SSID) is on the product label.
b.
Join the WiFi network and enter the WiFi password.
The password (network key) is on the product label.
Your computer or WiFi device connects to the modem router’s WiFi network.
If the computer is set to a static (fixed) IP address (this setting is uncommon), either change
the computer to obtain an IP address automatically from the modem router through DHCP,
or change the IP address of the computer to a static IP address in the
192.168.1.2–192.168.1.254 range.
Note
11.
Launch a web browser.
Install and Access the Modem Router and Its Network
26
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
Page 27 / 299
The modem router checks the Internet connection.
If the Configuring the Internet Connection page displays, skip to Step 13. If it does not display, do the following:
a.
In the address field of the web browser, enter
www.routerlogin.net
.
b.
When prompted, enter
admin
for the user name and
password
for the password.
If the Configuring the Internet Connection page displays, skip to Step 13. If it still does not display, see Step 12.
12.
If the browser cannot display the web page, do the following:
a.
Make sure that the computer is connected to one of the four Ethernet LAN ports or over WiFi to the modem
router.
b.
Make sure that the Power LED
of the modem router is lit solid white.
c.
Make sure that your browser does not cache the previous page by closing and reopening the browser.
d.
Clear the browser cache.
e.
If the computer is set to a static (fixed) IP address (this setting is uncommon), either change the computer
to obtain an IP address automatically from the modem router through DHCP, or change the IP address of
the computer to a static IP address in the 192.168.1.2–192.168.1.254 range.
13.
From the
Country
menu, select the country in which you use the modem router.
Install and Access the Modem Router and Its Network
27
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
Page 28 / 299
14.
From the
Internet Service Provider
menu, select the Internet service provider (ISP) that you are using.
If your ISP is not in the menu, select
Other
.
15.
Select the
Yes
radio button.
16.
Click the
Next
button.
When the modem router is connected to the Internet, the Congratulations! page displays, and you successfully
completed the setup process. If the Congratulations! page does not display, other pages might display and you
might need to provide more information, in which case you must continue with the next step. The pages that
display depend on your type of ISP connection and configuration.
17.
(Only if you are using a DSL connection and the following page displays) Specify a full scan to let the Setup
Wizard find the PVC protocol.
The page that might display asks you if you need the Setup Wizard to do a full scan to find the PVC protocol. If
this page does not display, continue with Step 18.
Do the following:
Install and Access the Modem Router and Its Network
28
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
Page 29 / 299
a.
Select the
Yes
radio button.
b.
Click the
Next
button.
The Setup Wizard performs a full scan, which might take up to six minutes.
18.
(Only if the following page displays) Specify how to manage problems with the detection of the Internet connection.
The page that might display states that a problem occurred while the wizard was detecting the Internet connection.
If this page does not display, continue with Step 19.
Take one of the following actions:
•
If you did not yet power cycle the modem, do so now:
a.
Unplug your modem’s power, leaving the modem connected to the wall jack for your Internet service.
b.
If your modem includes a battery backup, remove the battery.
c.
Wait 10 seconds.
d.
If your modem includes a battery backup, reinsert the battery.
e.
Plug in your modem’s power and turn on your modem.
f.
Wait two minutes.
g.
Select the
I just power cycled the modem and waited for 2 minutes
radio button.
h.
Click the
Next
button.
•
See if the DSL cable is not fully inserted or is inserted at the wrong place. If necessary, do the following:
Install and Access the Modem Router and Its Network
29
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
Page 30 / 299
a.
Fully insert the DSL cable in the correct port on the modem and in the gray DSL port on the modem
router.
b.
Select the
I corrected a problem with the DSL/Ethernet cable
radio button.
c.
Click the
Next
button.
•
If you do not need to power cycle the modem or the DSL cable is already fully inserted in the correct ports,
do the following:
a.
Select the
None of the above
radio button.
b.
Click the
Next
button.
19.
(Only if the following page displays) Specify how to manage problems with the detection of the IP address for
the Internet connection.
The page that might display states that a problem occurred while the wizard was detecting the Internet connection
IP address. If this page does not display, continue with Step 20.
Take one of the following actions:
•
If your ISP assigned you a fixed (static) IP address, do the following:
Install and Access the Modem Router and Its Network
30
Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router Model D7800
19216811.live