1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. CG3700EMR
    5. /
  5. 4
Page 16 / 76 Scroll up to view Page 11 - 15
NETGEAR genie Basic Settings
16
WiFi Cable Modem Router C3700
Cable Connection
To change the starting frequency:
From the Basic tab, select
Cable Connection
.
The Starting Frequency is automatically generated. Most of the time, you do not need to
enter a value in this field. If you need to enter a starting frequency, contact your Internet
service provider.
Use the Cable Connection screen to track the initialization procedure of the modem router,
and to get details about the downstream and upstream cable channel. The time is displayed
after the modem router is initialized.
The modem router automatically goes through the following steps in the provisioning
process:
•
Scans and locks the downstream frequency and then ranges the upstream channels.
•
Obtains a WAN address for the modem router.
•
Connects to the Internet.
View or Configure Your Wireless Network
The Wireless screen lets you view or configure the wireless network set-up.
The wireless cable gateway comes with preset security. This feature means that the WiFi
network name (SSID), network key (password), and security option (encryption protocol) are
preset in the factory. You can find the preset SSID and password on the bottom of the unit.
Page 17 / 76
NETGEAR genie Basic Settings
17
WiFi Cable Modem Router C3700
Note:
The preset SSID and password are uniquely generated for every
device to protect and maximize your wireless security.
NETGEAR recommends that you do not change your preset security settings
.
If you do
decide to change your preset security settings, make a note of the new settings and store it in
a safe place.
If you use a wireless computer to change the wireless network name (SSID) or other wireless
security settings, you are disconnected when you click the Apply button. To avoid this
problem, use a computer with a wired connection to access the modem router.
To view or change basic wireless settings:
1.
From the Basic tab, select
Wireless
.
The screen sections, settings, and procedures are explained in the following sections.
2.
Make the appropriate changes.
3.
Click the
Apply
button.
Your settings are saved.
4.
Set up and test your wireless devices and computers to make sure that they can connect
wirelessly. If they do not, check the following:
•
Is your wireless device or computer connected to your network or another wireless
network in your area? Some wireless devices automatically connect to the first open
network (without wireless security) that they discover.
•
Does your wireless device or computer appear on the Network Map screen? If it does,
it is connected to the network.
•
If you are not sure what the network name (SSID) or password is, look on the label on
your modem router.
Page 18 / 76
NETGEAR genie Basic Settings
18
WiFi Cable Modem Router C3700
Wireless Screen Fields
The Fragmentation Length, CTS/RTS Threshold, and Preamble Mode options in this screen
are reserved for wireless testing and advanced configuration only. Do not change these
settings unless you have a specific reason to do so.
•
Region Selection
. Select the location where the modem router is used.
•
Enable Wireless Gateway Radio.
This setting allows the modem router to broadcast its
SSID so wireless stations can see this wireless name (SSID) in their scanned network
lists. This check box is selected by default. To turn off the SSID broadcast, clear the
Enable SSID Broadcast
check box, and click the
Apply
button.
•
Enable SSID Broadcast
. This feature allows the modem router to broadcast its SSID so
wireless stations can see this wireless name (SSID) in their scanned network lists. This
check box is selected by default. To turn off the SSID broadcast, clear this check box, and
click the
Apply
button.
•
Name (SSID)
. The SSID is also known as the wireless network name. Enter a
32-character (maximum) name in this field. This field is case-sensitive. The default SSID
is randomly generated, and
NETGEAR strongly recommends that you do not change
the SSID
.
•
Channel
. This setting is the wireless channel that the modem router uses. Choose a
value from 1 through 13. (For products in the North America market, only Channels 1
through 11 can be operated.) Do not change the channel unless you experience
interference (such as lost connections or slow data transfers). If any interference
happens, experiment with different channels to see which is the best.
•
Mode
. Up to 145 Mbps is the default and allows 802.11n and 802.11g wireless devices to
join the network. g & b
supports up to 54 Mbps. The 300-Mbps setting allows 802.11n
devices to connect at this speed.
Security Options Settings
The Security Options section of the Wireless screen lets you change the security option and
password.
NETGEAR recommends that you do not change the security option or
password
,
but if you want to change these settings, this section explains how.
CAUTION:
Do not disable security.
To change the WPA security option and password:
1.
Under Security Options, select the WPA option that you want.
Page 19 / 76
NETGEAR genie Basic Settings
19
WiFi Cable Modem Router C3700
2.
In the password field that displays when you select a WPA security option, enter the network
key (password) that you want to use. It is a text string from 8 to 63 characters.
Network Map
You can view all computers or devices that are currently connected to your network here.
To view a map of attached devices:
From the Basic tab, select
Network Map
.
Wired devices are connected to the modem router with Ethernet cables. Wireless devices
have joined the wireless network.
•
IP Address
. The IP address that the modem router assigned to this device when it joined
the network. This number can change when a device disconnects and then rejoins the
network.
•
Device Name
. If the device name is known, it is shown here.
You can click
Refresh
to update this screen.
Voice Status
You can review specific details about the voice connection.
Page 20 / 76
NETGEAR genie Basic Settings
20
WiFi Cable Modem Router C3700
To view the status of the voice connection:
From the Basic tab, select
Voice
.
The following fields display:
•
MTA Provision Status
. The gateway status. The values can be Operational, On hook, or
Off hook. This status applies to line 1.
•
MTA MAC Address
. The telephony MAC address.
•
MTA IP Address
. The telephony IP address.
•
MTA FQDN
. The Fully Qualified Domain Name (FQDN). The Internet service provider
assigns this name.
•
MTA Telephony Signaling
. This value is set to Media Gateway Control Protocol
(MGCP), a way of to set up voice calls.

Rate

4 / 5 based on 1 vote.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top