1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. AirCard 782S
    5. /
  5. 12
Page 56 / 78 Scroll up to view Page 51 - 55
AirCard 782S Mobile Hotspot User Guide
56
2400353
4.
In the DMZ Address field, enter the IP address of the computer you want to have in
the DMZ.
5.
Click
Submit
. (Submit button appears once you make a selection.)
Set LAN options
To set the hotspot’s LAN options:
1.
On the Homepage, log in as Administrator.
Page 57 / 78
Advanced Settings
Rev 1
Oct.13
57
2.
Click
Settings > Router > Basic
.
3.
Enter the desired information in the LAN section.
If the DHCP Server is enabled, it automatically assigns an IP address to each device
on the network and manages their configuration information.
The DNS mode setting specifies how the DNS servers are obtained. If you select
Auto, the servers use the DNS relay specified by the Internet provider.
4.
Click
Submit
. (Submit button appears once you make a selection.)
GPS
Your Hotspot provides GPS functionality.
Enable / disable GPS
Before you can use the GPS feature, you must enable GPS from the LCD screen or from
the Homepage.
On the LCD screen:
1.
From the home screen, tap
Settings > GPS
.
2.
Tap
On
(or
Off
to disable GPS).
On the Homepage:
1.
On the Homepage, log in as Administrator.
2.
Click
GPS
.
3.
In the GPS Settings section, select
Yes
next to “Enable GPS” (or select
No
to disable
GPS).
Page 58 / 78
AirCard 782S Mobile Hotspot User Guide
58
2400353
Set the GPS Mode
The GPS mode indicates how frequently location fixes are done:
•
Once (“One-time”, which can prolong the battery life), or
•
Periodically (“Continuous”)
You can set the GPS mode from the LCD screen or from the Homepage.
Note:
The GPS service must be enabled before you can set the GPS mode.
On the LCD screen:
1.
From the home screen, tap
Settings > GPS
.
2.
On the second page, tap
GPS Mode
.
3.
Select the desired mode (
One-time
or
Continuous
).
On the Homepage:
1.
On the Homepage, log in as Administrator.
2.
Click
GPS
.
3.
In the GPS Settings section beside GPS Mode, select the desired mode (
One-time
or
Continuous
).
Set the GPS measurement unit type
From the Hotstpot, you can choose whether to show GPS information using Metric or
standard units.
Note:
The GPS service must be enabled before you can choose the units type.
1.
On the Homepage, log in as Administrator.
2.
Click
GPS
.
3.
In the GPS Settings section beside Use Metric units, select
Yes
(or select
No
to use
standard units).
Use GPS to track your location
After enabling GPS, you can use the GPS feature to get your current location
coordinates (latitude, longitude, altitude, etc.) on demand (one-time) or continuously.
On the LCD screen:
1.
From the home screen, tap
Settings > GPS
.
2.
Tap
Get GPS fix
.
On the Homepage:
1.
On the Homepage, log in as Administrator.
2.
Click
GPS
.
3.
Click
Update Location
.
Page 59 / 78
Rev 1
Oct.13
59
4
4: Frequently Asked Questions
This chapter provides answers to questions you may have about your
Hotspot. (Also see
Troubleshooting
on page 65.)
Why can’t I connect a device to the
Hotspot?
If you are having an issue connecting to the Hotspot, try the following
suggestions:
•
Turn off your device and take the battery out, wait 10 seconds, put
the battery back in and turn your device on.
•
Restart your computer.
•
Turn off or temporarily disable any security programs or firewalls.
•
If possible, try using another computer or Wi-Fi device to connect to
your Hotspot. (If you can, then the problem is with the device that
cannot connect, not the Hotspot.)
Why can’t I access the Internet?
If you are connected to the Hotspot but cannot connect to the Internet,
try the following suggestions:
•
Check the display status on the LCD.
•
Make sure you have network coverage in your area.
•
Check your SIM card is active and enabled with data services.
•
Please wait 1–2 minutes for the hotspot to initialize.
•
Confirm that your account is activated and that no other Internet
connections are active.
•
Try switching your Hotspot off and on, and restarting your computer
or Wi-Fi device.
My battery has not charged while in
use and connected to the charger
If you are in a low-coverage area, have been transferring a lot of data, or
left the hotspot in a hot location, the internal temperature of the Hotspot
can rise above 45 °C. In these conditions, the battery cannot be charged
due to safety limits with Li-ion battery technology.
Note:
The Hotspot will not charge while it is boosting another device.
Page 60 / 78
AirCard 782S Mobile Hotspot User Guide
60
2400353
The signal indicator is always low
Your Hotspot has poor reception. Try moving it to a location with a clear view of the sky
(for example, near a window).
The download or upload speeds are very
slow
The speed depends on signal strength. Check your signal strength and network type.
How do I go back to the Homepage (web
interface)?
Open your browser and type in the homepage URL (or (for Telstra) http://
192.168.1.1) or (for BigPond) http://10.0.0.138), then log in using the admin login.
If you have changed the URL, you can find it in the LCD’s About screen (
Settings >
More > About
).
What do I do if I forget my Main or Guest
Wi-Fi Password
The Wi-Fi Password appears:
•
On the LCD’s:
·
Homescreen, unless you have configured it not to show
·
Main Wi-Fi screen —
Wi-Fi > Main Wi-Fi
·
Guest Wi-Fi screen —
Wi-Fi > Wi-Fi Profiles > Edit
(beside Enable Guest Wi-Fi
option).
If you are using a custom profile, this option is not available.
•
On the Homepage (
Wi-Fi > Connect
)
What do I do if I forget my Admin Login or
the Homepage URL?
The default Admin Login is
admin
, and the Homepage URL is displayed in the LCD’s
About screen (
Settings > More > About
).
If you changed the Admin Login and have forgotten it, you must set the Hotspot back
to factory defaults. On the LCD homescreen, tap
Settings > Reset
.

Rate

4 / 5 based on 1 vote.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top