1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. AC1450
    5. /
  5. 22
Page 106 / 128 Scroll up to view Page 101 - 105
Advanced Settings
106
AC1450 Smart WiFi Router
To set up a pass-through IPv6 Internet connection:
1.
Select
Advanced > Advanced Setup > IPv6
.
The IPv6 screen displays.
2.
In the Internet Connection Type list, select
Pass Through
.
The screen adjusts, but no additional fields display.
3.
Click the
Apply
button.
IPv6 Fixed
To set up a pass-through IPv6 Internet connection:
1.
Select
Advanced > Advanced Setup > IPv6
.
The IPv6 screen displays.
2.
In the Internet Connection Type list, select
Fixed
.
The screen adjusts:
3.
Configure the fixed IPv6 addresses for the WAN connection:
•
IPv6 Address/Prefix Length
. The IPv6 address and prefix length of the router WAN
interface.
•
Default IPv6 Gateway
. The IPv6 address of the default IPv6 gateway for the router’s
WAN interface.
•
Primary DNS Server
. The primary DNS server that resolves IPv6 domain name
records for the router.
•
Secondary DNS Server
. The secondary DNS server that resolves IPv6 domain
name records for the router.
Page 107 / 128
Advanced Settings
107
AC1450 Smart WiFi Router
Note:
If you do not specify the DNS servers, the router uses the DNS servers
that are configured for the IPv4 Internet connection on the Internet Setup
screen. (See
Internet Setup
on page
20.)
4.
Specify how the router assigns IPv6 addresses to the devices on your home network (the
LAN) by selecting one of the following radio buttons:
•
Use DHCP Server
. This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function.
•
Auto Config
. This is the default setting.
5.
In the IPv6 Address/Prefix Length fields, specify the static IPv6 address and prefix length of
the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
6.
Click the
Apply
button.
IPv6 DHCP
To set up an IPv6 Internet connection with a DHCP server:
1.
Select
Advanced > Advanced Setup > IPv6
.
The IPv6 screen displays.
2.
In the Internet Connection Type list, select
DHCP
.
The screen adjusts:
The router automatically detects the information in the following fields:
•
Router’s IPv6 Address on WAN
. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
Page 108 / 128
Advanced Settings
108
AC1450 Smart WiFi Router
•
Router’s IPv6 Address on LAN
. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also indicated by the underline (_) under the IPv6 address. If no address is
acquired, the field displays Not Available.
3.
(Optional) In the DHCP User Class (If Required) field, enter a host name.
Most people do not need to fill in this field, but if your ISP has given you a specific host
name, enter it here.
4.
(Optional) In the Domain Name (If Required) field, enter a domain name.
You can type the domain name of your IPv6 ISP. (Do not enter the domain name for the
IPv4 ISP here.) For example, if your ISP’s mail server is mail.xxx.yyy.zzz, you would type
xxx.yyy.zzz as the domain name. If your ISP provided a domain name, type it in this field.
(For example, Earthlink Cable might require a host name of home, and Comcast
sometimes supplies a domain name.)
5.
Specify how the router assigns IPv6 addresses to the devices on your home network (the
LAN) by selecting one of the following radio buttons:
•
Use DHCP Server
. This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function.
•
Auto Config
. This is the default setting.
6.
(Optional) Select the
Use This Interface ID
check box, and specify the interface ID that you
want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
7.
Click the
Apply
button.
IPv6 PPPoE
To set up a PPPoE IPv6 Internet connection:
1.
Select
Advanced > Advanced Setup > IPv6
.
The IPv6 screen displays.
2.
In the Internet Connection Type list, select
PPPoE
.
Page 109 / 128
Advanced Settings
109
AC1450 Smart WiFi Router
The screen adjusts:
The router automatically detects the information in the following fields:
•
Router’s IPv6 Address on WAN
. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the length
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
•
Router’s IPv6 Address on LAN
. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the prefix,
which is also indicated by the underline (_) under the IPv6 address. If no address is
acquired, the field displays Not Available.
3.
In the Login field, enter the login information for the ISP connection.
This is usually the name that you use in your email address. For example, if your main
mail account is [email protected], then you would type JerAB in this field. Some ISPs (like
Mindspring, Earthlink, and T-DSL) require that you use your full email address when you
log in. If your ISP requires your full email address, type it in this field.
4.
In the Password field, enter the password for the ISP connection.
5.
In the Service Name name field, enter a service name.
If your ISP did not provide a service name, leave this field blank.
Note:
The default setting of the Connection Mode field is Always on to provide
a steady IPv6 connection. The router never terminates the connection. If the
connection is terminated, for example, when the modem is turned off, the router
attempts to reestablish the connection immediately after the PPPoE
connection becomes available again.
6.
Specify how the router assigns IPv6 addresses to the devices on your home network (the
LAN) by selecting one of the following radio buttons:
Page 110 / 128
Advanced Settings
110
AC1450 Smart WiFi Router
•
Use DHCP Server
. This method passes more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function.
•
Auto Config
. This is the default setting.
7.
(Optional) Select the
Use This Interface ID
check box, and specify the interface ID that you
want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
8.
Click the
Apply
button.
Traffic Meter
Traffic metering allows you to monitor the volume of Internet traffic that passes through the
router Internet port. You can set limits for traffic volume.
To monitor Internet traffic:
1.
Click
Advanced > Advanced Setup > Traffic Meter
.
Scroll to view
more settings
2.
Select the
Enable Traffic Meter
check box.
3.
(Optional) Control the volume of Internet traffic.
You can use either the traffic volume control feature or the connection time control feature
to do this.
•
Select the
Traffic volume control
by
radio button and then select one of the
following options:
-
No Limit
. No restriction is applied when the traffic limit is reached.
-
Download only
. The restriction is applied to incoming traffic only.
-
Both Directions
. The restriction is applied to both incoming and outgoing traffic.
•
Select the
Connection time control
radio button and enter the allowed hours in the
Monthly limit field.

Rate

4 / 5 based on 3 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top