NetComm NF3ADV Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

NetComm

NF3ADV

Page 76 / 89 Scroll up to view Page 71 - 75

www.netcommwireless.com

NF3ADV

–

Dual Band W

Additional

Establishing a wireless

Windows XP (Service Pack 2)

Open the Network Connections control p

Right-click on your Wireless Network Co

Select the wireless network listed on you

Enter the network key

(

refer to the includ

The connection will show Connected.

Windows Vista

Open the Network and Sharing Center (S

Click on "Connect to a network".

Choose "Connect to the Internet" and cl

Select the wireless network listed on you

Enter the network key

(

refer to the includ

Select the appropriate location. This will

Click on both "Save this network" and "S

Windows 7

Open the Network and Sharing Center (S

Click on "Change Adapter settings" on th

Right-click on "Wireless Network Connec

Select the wireless network listed on you

Enter the network key

(

refer to the includ

You may then see a window that asks yo

You may then see a window prompting y

You can verify your wireless connection

After clicking on this, you should see an

Mac OSX 10.6

Click on the Airport icon on the top right

Select the wireless network listed on you

On the new window, select “Show Passw

default wireless network key)

in the Pass

To check the connection, click on the Ai

Please note: For any other operating s

adaptor utility to configure your wirele

information.

WiFi Data and VoIP Gateway

Product Inform

s connection

panel (Start -> Control Panel -> Network Connections).

onnection and select View Available Wireless Networks.

ur included wireless security card and click Connect.

ded wireless security card

for the default wireless networ

Start > Control Panel > Network and Sharing center).

lick on "Next".

ur included wireless security card and click Connect.

ded wireless security card

for the default wireless networ

affect the firewall settings on the computer.

Start this connection automatically" and click "Next".

Start > Control Panel > Network and Sharing Center).

he left-hand side.

ction" and select "Connect / Disconnect".

ur included wireless security card and click Connect.

ded wireless security card for the default wireless networ

ou to "Select a location for the 'wireless' network". Pleas

you to setup a "HomeGroup". Click "Cancel" on this.

by clicking the "Wireless Signal" indicator in your system

entry matching the SSID of your NF3ADV with "Connect

t menu.

ur included wireless security card and click Connect.

word”, type in the network key (refer to the included wire

sword field and then click on OK.

irport icon and there should be a tick on the wireless net

system (Windows 98SE, Windows ME, Windows 2000 e

ess connection, please consult the wireless adapter docu

NF3ADV User Guide

mation

rk key).

se select the "Home" location.

m tray.

ted" next to it.

eless security card for the

twork name.

etc.) or if you use a wireless

umentation for additional

Page 77 / 89

NF3ADV User Guide

Troubleshooting

Using the indicator lights (LEDs) to

The LEDs are useful aides for finding possible

Power LED

The Power LED does not light up.

STEP

Make sure that the NF3ADV pow

power source. Use only the sup

Check that the NF3ADV and the

Turn the NF3ADV off and on.

If the error persists, you may ha

Web Configuration

I cannot access the web configuration pages

RECTIVE ACTION

STEP

Make sure you are using the cor

device from the Network Setup

Check that you have enabled re

filter, ensure your computer’s IP

Your computer’s and the NF3AD

check the subnet in use by the r

If you have changed the devices

address bar of your web browse

The web configuration does not display prop

STEP

Delete the temporary web files a

click the Delete Files ... button. W

click OK. (Steps may vary depen

CORRECTIVE ACTION

I forgot my login username and/or password.

STEP

Press the Reset button for ten s

defaults have been restored and

You can now login with the facto

It is highly recommended to cha

username and password in a sa

S CORRECTIVE ACT

WLAN Interface

I cannot access the NF3ADV from the WLAN

STEP

If you are using a static IP addre

mask of the NF3ADV and your c

configuration from the Network

TE CORREC

o Diagnose Problems

e problem causes.

CORRECT

CORRECTIVE

IVE

IVE ACTION

ACTION

wer adaptor is connected to the device and plugged in to an appropriate

pplied power adaptor.

e power source are both turned on and device is receiving sufficient pow

ave a hardware problem. In this case, you should contact technical suppo

COR

CORRECT

CORRECTIVE

IVE

IVE ACTION

ACTION

rrect IP address of the NF3ADV. You can check the IP address of the

configuration page.

emote administration access. If you have configured an inbound packet

P address matches it.

DV’s IP addresses must be on the same subnet for LAN access. You ca

router on the Network Setup page.

s IP address, then enter the new one as the URL you enter into the

er.

perly.

CORRECT

CORRECTIVE

IVE

IVE ACTION

ACTION

and log in again. In Internet Explorer, click Tools, Internet Options and th

When a Delete Files window displays, select Delete all offline content and

nding on the version of your Internet browser.)

CORRECT

CORRECTIVE

IVE

IVE ACTION

ACTION

seconds, and then release it. When the Power LED begins to blink, the

d the NF3ADV restarts.

ory default username and password “admin” (without the quotes)

ange the default username and password. Make sure you store the

afe place.

N or ping any computer on the WLAN.

CORRECT ACTION

ess for the WLAN connection, make sure that the IP address and the sub

computer(s) are on the same subnet. You can check the routers

Setup page.

www.netcommwireless.com

wer.

ort.

hen

bnet

Page 78 / 89

www.netcommwireless.com

NF3ADV

–

Dual Band W

Using the NF3ADV to m

The NF3ADV provides circuit switched voice

calls via a regular analogue telephone using t

Please note: Please refer to your mo

charges that apply.

Handset requirements

The NF3ADV allows you to make telephone c

Phone port and up to 5 cordless phones usin

manufacturer of your analogue or cordless te

Maximum REN Loading

Please note that the line interface on the NF3

The ringer equivalence number (REN) for eac

connected to each line port.

Before you start make any phone call, make

You have a WAN connection to the in

Your NF3ADV is powered on and in r

Your SIP settings have successfully r

A working analogue telephone conne

You hear the dial tone and the Phone

How to place a call

To make a call, simply lift the handset and dia

manufacturer.

How to receive a call

When an incoming call is received, the Line lig

telephone following the instructions provided

If there is no phone connected to the NF3AD

Answering an incoming call when

Call waiting enables a 2nd incoming call to be

(briefly depressing the hook button). The inco

flash, you will be returned to the original telep

Accessing voicemail

To access your voicemail, please dial *98 and

WiFi Data and VoIP Gateway

make and receive telephone

services via a telephony line interface offering the ability

the local voice network.

obile service provider for activation of your voice service

calls over the VoIP network using a standard analogue te

ng the built in DECT module . Please refer to the docume

elephone for assistance with the operation of your teleph

3ADV is capable of supporting multiple analogue telepho

ch line is 5. Therefore, a maximum of 5 handsets each wi

sure you checked the following:

nternet.

running condition.

registered to your VoIP provider’s network.

ected into the Phone port.

e LED on the front of your NF3ADV should light up after

al the number following the instructions provided by your

ght will start flashing and any phones connected to the N

by your telephone handset manufacturer to conduct the

DV, all incoming calls will be transferred to Voicemail (if en

on a call

e received while you are on a call. To answer a call waitin

oming call should then be answered. Upon hanging up o

phone call.

d follow the voice prompts.

NF3ADV User Guide

e calls

to make and receive telephone

and information about the call

elephone via the built in RJ-11

entation provided by the

hone handset.

ones connected via splitters.

ith a REN number of 1 can be

lifting the handset.

r telephone handset

NF3ADV will ring. Answer the

e call.

nabled on the device).

ng call, perform a hook-flash

or performing another hook-

Page 79 / 89

NF3ADV User Guide

Call Feature Codes

Quick Reference Table

The NF3ADV supports a number of call featu

FEATURE

Caller ID

Call Waiting

Call Forwarding

Table 5

Caller ID

Caller ID transmits a caller’s number to the ca

answered. Where available, caller ID can also

To force Caller ID to be blocked

To force Caller ID to be unblock

Call Waiting

Call waiting allows for indication and answerin

To disable call waiting, dial #43

To enable call waiting, dial *43#

To check the status of Call Wai

Call waiting is disabled

Call waiting is enabled

Call forwarding

Call forwarding (or call diverting), is a feature

circumstances at the time of receiving the ca

Please note: The Call Waiting featur

enabled again after Call Forwarding

Call Forwarding Unconditional

Call forwarding Unconditional will divert all inc

To enable Call Forwarding Unc

(Where directory number is the

Hang up after you hear 2 low p

To disable Call Forwarding Unc

Hang up after you hear 2 high p

To check the status of Call Forw

management console.

Call Forwarding Unco

Call Forwarding No Answer

Call forwarding No Answer will divert all incom

To enable Call Forwarding No A

(Where directory number is the

Hang up after you hear 2 low p

To disable Call Forwarding No

Hang up after you hear 2 high p

To check the status of Call Forw

console.

Call Forwarding No An

ure codes for supplementary services.

ACTIVATION

DEACTIVATION

#31#

(to block an individual call)

*31#

(to unblock an individual c

*43#

#43#

*72<Directory Number>#

*72#

50: Additional Product Information - Call Feature Codes Quick Reference

alled party’s telephone equipment when the call is being

o provide a name associated with the calling telephone n

d for an outbound call, dial #31# followed by the numbe

ked for an outbound call, dial *31# and then dial the num

ng of an incoming telephone whilst an existing call is und

3#, and hang up after you hear 2 high pitch beeps.

#, and hang up after you hear 2 low pitch beeps.

iting, dial *#43# or view the advanced status page of the

d if you hear 2 high pitch beeps.

d if you hear 2 low pitch beeps.

that allows an incoming call to be redirected to another n

all.

re will automatically turn off if you enable Call forwarding.

is disabled.

coming calls to a phone number that you desire.

conditional, dial *21* <Directory Number>#

e number you wish to forward calls to)

pitch beeps.

conditional, dial #21#

pitch beeps.

warding Unconditional, dial *#21# or view the advanced

onditional is disabled if you hear 2 high pitch beeps.

onditional is enabled if you hear 2 low pitch beeps.

ming calls to a phone number that you desire only if the i

Answer, dial *72<Directory Number>#

e number you wish to forward calls to)

pitch beeps.

Answer, dial #72#

pitch beeps.

warding No Answer, dial *#61# or view the advanced sta

nswer is disabled if you hear 2 high pitch beeps.

nswer is enabled if you hear 2 low pitch beeps.

www.netcommwireless.com

STATUS

call)

N/A

*#43#

*#72#

g set up but before the call is

number.

er you wish to dial.

mber.

derway.

e management console.

number depending on the

. Call Waiting will need to be

status page of the

incoming call is not answered.

atus page of the management

Page 80 / 89

www.netcommwireless.com

NF3ADV

–

Dual Band W

Call Forwarding Busy

Call forwarding busy will divert all incoming ca

To enable Call Forwarding Bus

to forward calls to).

Hang up after you hear 2 low p

To disable Call Forwarding Bus

Hang up after you hear 2 high p

To check the status of Call Forw

console.

Call Forwarding Busy

Call Forwarding Not Reachable

Call forwarding busy will divert all incoming ca

network.

To enable Call Forwarding Not

(Where directory number is the

Hang up after you hear 2 low p

To disable Call Forwarding Not

To check the status of Call Forw

management console.

Call Forwarding No An

Conference Call

A conference call can be achieved by perform

your call and then perform another hook-flash

Please note: In order to activate a co

Troubleshooting

What do I do if I have no dial tone?

Please follow the procedure listed below:

Check to make sure the phone is plu

Check to make sure you are using th

Check to make sure the line light on

Check to make sure the blue MBB in

Check to make sure your MBB SIM c

Check and see if you get the dial ton

I have noise interference during telephone ca

To resolve this issue, try the following:

Verify that the RJ-11 cable is se

Try to remove any telephone sp

Try rebooting your NF3ADV.

WiFi Data and VoIP Gateway

alls to a phone number that you desire only if your teleph

sy, dial *67*<Directory Number># (Where the directory n

pitch beeps.

sy, dial #67#

pitch beeps.

warding Busy, dial *#67# or view the advanced status pa

is disabled if you hear 2 high pitch beeps.

is enabled if you hear 2 low pitch beeps.

alls to a phone number that you desire only if your teleph

Reachable dial *62*<Directory Number>#

e number you wish to forward calls to)

pitch beeps.

t Reachable, dial #62#, Hang up after you hear 2 high pit

warding Not Reachable, dial *#62# or view the advanced

nswer is disabled if you hear 2 high pitch beeps.

nswer is enabled if you hear 2 low pitch beeps.

ming a hook-flash and then by dialing the third party. Wa

h to conference all the parties together.

onference call, you will need to have originated both calls

ugged into your NF3ADV into the RJ-11 port marked with

he correct cable (Cat-3 UTP Telephone Cable with RJ-11

the front panel of the NF3ADV turns solid blue if you lift t

ndication light on the front of the NF3ADV is blinking.

card is activated and inserted into your NF3ADV properly

ne after rebooting your NF3ADV.

alls. How can I fix this?

ecurely connected and not damaged.

plitters from the connection between your phone and the

NF3ADV User Guide

hone is busy on another call.

number is the number you wish

age of the management

hone is unreachable by the

tch beeps.

d status page of the

ait for the third party to answer

h a phone.

1 plugs).

the handset.

e NF3ADV.

Rate

Popular NetComm Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share