1. Home
    2. /
  2. Manuals
    3. /
  3. NetComm
    4. /
  4. NF3ADV
    5. /
  5. 14
Page 66 / 89 Scroll up to view Page 61 - 65
www.netcommwireless.com
NF3ADV
–
Dual Band W
OPTION
Codec Priority 1
Set t
Codec Priority 2
Set t
Codec Priority 3
Set t
Codec Priority 4
Set t
G.711 & G.729 Packet Length
Adju
Voice VAD
Adju
adju
chan
The Packet Length for Comfort
Noise Level
To m
com
unle
Click ‘Save’ to save your settings or ‘Undo’ to
DTMF Setting
The DTMF Setting
page
enables
you to
specify
signaling is used for signaling in telecommuni
handsets and other communications devices
a phone number on a standard handset and
The following DTMF standards
are
available
for
°
RFC
2833.
°
Inband
DTMF.
°
Send
DTMF SIP
I
n
f
o.
This information will usually
be supplied by you
issues
with
DTMF
based services such as
auto
Click ‘Save’ to save your settings or ‘Undo’ to
WiFi Data and VoIP Gateway
D
EF
I
NIT
I
O
N
the audio codec you would like to try first with your VOIP service.
the audio codec you would like to try second with your VOIP service.
the audio codec you would like to try third with your VOIP service.
the audio codec you would like to try fourth with your VOIP service.
ust the packet length size. This can reduce or increase the bandwidth req
ustment of the ‘Voice Activity Detection’ (VAD) interval can be done here
usted unless the words in your conversation are being cut off. (This settin
nged.)
minimise jarring, stop-start transmissions between the silence and speec
mfort noise is used, filling the silent periods of a call with ambient noise. D
ess advised to by your VoIP Service Provider.
Table 41: VoIP/NAS View - SIP Setting - Codec Settings
o discard the settings entered.
y which DTMF
standard to use on your
VOIP
ser
v
i
ce. DTMF
ications over analog telephone lines in the voice-frequen
s. Many people use DTMF settings daily when making a n
producing a tone.
Figure 76: VoIP/NAS View - SIP Setting - DTMF Setting
r use:
ur
VOIP service provider
and should not need to be change
omated telephone services and answering machines.
o discard the settings entered.
66
NF3ADV User Guide
quired for a VOIP call.
but should not be
ng should not need to be
ch periods of a call
Do not change this value
F or
Dual-tone multi-frequency
ncy band between telephone
number selection when dialing
ed
unless
you are
experiencing
Page 67 / 89
NF3ADV User Guide
67
Other
S
e
tt
in
gs
The
Other
Settings
page
enables
you to
specify
will usually
be
supplied
by your
VOIP service pro
calls
or with
successfully registering
the SIP set
OPTION
SIP Expire Time
Se
VoI
Use DNS SRV
Se
and
sav
SIP ALG
The
traf
set
Rport
Se
y
a
different SIP expire
time and select to
enable
the DNS
ovider
and should not need to be changed
unless
you are
ttings of your
VoIP
service.
Figure 77: VoIP/NAS View - SIP Setting - Other Settings
D
EF
I
NIT
I
O
N
elect to length of time in seconds between the NF3ADV re-registering the
oIP Service Provider’s network.
elect enable or disable the DNS SRV function. This is a DNS service recor
d port number of the servers used by your specified VoIP service. Press
ve any settings changes.
e SIP ALG (Application Layer Gateway) is basically a VoIP firewall. It chec
ffic where necessary to pass through a NAT firewall. Press the Save butt
ttings changes.
elect to enable or disable Rport function.
Table 42: VoIP/NAS View - SIP Setting - Other Settings
www.netcommwireless.com
SRV
function. This
information
e experiencing
issues
with
VoIP
e SIP settings on your
ord of the IP addresses
the Save button to
cks and modifies SIP
ton to save any
Page 68 / 89
www.netcommwireless.com
NF3ADV
–
Dual Band W
Other VoIP
The Other VoIP settings page enables you to
item on the left to access the configuration pa
STUN Settings
The STUN Settings page enables you to conf
information will usually be supplied by your VO
VOIP calls or signing into your VOIP service.
OPTION
SIP ALG
T
m
STUN
S
STUN Server
E
STUN Port
E
Press the Save button to save any settings ch
WiFi Data and VoIP Gateway
Settings
o configure settings for connecting the NF3ADV to a STU
age.
nfigure settings related to utilizing a STUN server with you
OIP service provider and should not be needed unless y
Figure 78: VoIP/NAS View - Other VoIP Settings - STUN Settings
D
EF
I
NIT
I
O
N
The SIP ALG (Application Layer Gateway) is basically a VoIP firewall. It ch
modifies SIP traffic where necessary to pass through a NAT firewall.
Select to enable or disable STUN functionality.
Enter the IP address of the STUN server.
Enter port number that the STUN server uses.
Table 43: VoIP/NAS View - Other VoIP Settings - STUN Settings
hanges you make.
68
NF3ADV User Guide
UN server. Click on the menu
ur VOIP service. This
you are experiencing issues with
hecks and
Page 69 / 89
NF3ADV User Guide
69
Telephony Profile
The Telephony Profile page enables you to co
Generally this setting should not need to be c
Click ‘Save’ to save any changes to your sett
onfigure the way the FXS phone port (RJ-11) operates.
Figure 79: VoIP/NAS View - Other VoIP Settings - Telephony Profile
changed. Currently the Australia and United States Profil
tings or ‘Undo’ to discard the settings you have entered.
www.netcommwireless.com
le are available for use.
.
Page 70 / 89
www.netcommwireless.com
NF3ADV
–
Dual Band W
NAS Setting
The NAS Settings page enables you to config
used to remotely access files stored on an at
configuration page.
Disk Utility
The Disk Utility function enables you to check
determine if there are any file system errors p
can also format (erase) any attached storage
File Sharing
The File Sharing function enables the NBF3A
USB Storage can be viewed from Windows E
\\<Configured Name of the NF3ADV>\Storag
Files can then be dragged and dropped onto
OPTION
Computer Name
Work Group
Server Comment
WiFi Data and VoIP Gateway
gs
gure the network area storage (NAS) function of the NF3
ttached USB hard drive. Click on any of the menu items
k any attached USB storage for errors. The NF3ADV will
present. File System errors can prevent you being able to
if needed. Simply click the appropriate button to perform
Figure 80: VoIP/NAS View - NAS Settings - Disk utility
ADVto take part in a Windows networking environment. O
Explorer by typing:
ge\ or as for the example below \\NAS\Storage.
o the attached USB storage.
Figure 81: VoIP/NAS View - NAS Settings - File Sharing
DEFINITION
Enter the computer name the NF3ADV is to use on the network.
Enter the network workgroup the NF3ADV is to be a member of.
Enter the comment to be displayed when a list of network hosts is
can be useful to help identify the device and its purpose.
Table 44: VoIP/NAS View - NAS Settings - File Sharing Settings
70
NF3ADV User Guide
3ADV. This function can be
to access the respective
scan the attached storage and
o access stored content. You
m either task.
Once configured, the attached
shown. This

Rate

4 / 5 based on 1 vote.

Popular NetComm Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top