1. Home
    2. /
  2. Manuals
    3. /
  3. NetComm
    4. /
  4. NF3ADV
    5. /
  5. 13
Page 61 / 89 Scroll up to view Page 56 - 60
NF3ADV User Guide
61
Hot Line
The
Hot
Line
page
enables
you to
configure
a
t
the
telephone han
dset
)
after the
specified
wait
OPTION
Phone Set
Use Hot Line
Hot Line Number
Waiting time before starting Hot Line
Call Features
The Call Features page enables you to config
VOIP service. Please note each call feature lis
telephone
number which can be
called
without
dialing
any
time.
Figure 67:
VoIP/NAS View - Phone Settings -Hot Line
D
EF
I
NIT
I
O
N
Select the phone you wish to use as the Hot Line phone.
Select to Enable or Disable the Hot Line feature.
Enter the number to forward Hot Line calls to.
Enter the amount of time (in seconds) to wait after the handset is off h
a call to the Hot Line number.
Table 38: VoIP/NAS View - Phone Settings - Hot Line Settings
gure dialing codes that can be used to activate or deactiv
sted will only function if your VoIP Service Provider has e
Figure 68: VoIP/NAS View - Phone Settings - Call Features
www.netcommwireless.com
y numbers at
all (simply
pick up
hook before forwarding
vate additional features on your
enabled them on your VoIP line.
Page 62 / 89
www.netcommwireless.com
NF3ADV
–
Dual Band W
You can change the dial codes on the
following
°
Blind Call Transfer
°
Anonymous Call Enable
°
Anonymous Call Disable
°
Anonymous Call per Call Basis
°
DND Enable
°
DND Disable
°
Call Forwarding Enable
°
Call Forwarding Disable
°
Call Return
Click ‘Save
‛
to save your settings or ’Undo
‛
to
DECT Settings
The DECT (Digital Enhanced Cordless Teleco
base station. Up to four cordless DECT hand
both VoIP (FXS) and PSTN (FXO) phone call t
DECT Settings
This section allows a registered DECT handse
OPTION
OPTION
OPTION
OPTION
Base Station Status
T
DECT
E
Handset Setting
T
D
WiFi Data and VoIP Gateway
g VOIP service
features:
o discard any incorrect settings entered.
ommunications) Settings page allows for the configuratio
dsets can be connected to the DECT base station at one
types.
et to be defined into or deregistered from a DECT Phone
Figure 69: VoIP/NAS View - Phone Setting - DECT Handset Settings
D
EF
I
NIT
I
O
N
This field give a basic description of the DECT base station’s current state
Enable or disable the DECT base station with this field.
This section allows a registered DECT handset to be defined into or dereg
DECT Phone Group.
Table 39: Advanced - Phone Setting - DECT Handset Settings
62
NF3ADV User Guide
on of the router’s built in DECT
e time and can be used with
e Group.
e.
gistered from a
Page 63 / 89
NF3ADV User Guide
63
Handset Page
This page allows the DECT handset page to
DECT Handset Registration Page
This page allows the DECT handset registrati
DECT Handset PIN Code Page
This page allows the PIN code for a DECT ha
be enabled or disabled.
Figure 70: VoIP/NAS View - Phone Setting - DECT Settings - Handset Page
ion function to be enabled or disabled.
Figure 71: VoIP/NAS View - Phone Setting - DECT Settings - Registration Pa
andset to be set.
Figure 72: VoIP/NAS View - Phone Setting - DECT Settings - PIN Code Page
www.netcommwireless.com
age
e
Page 64 / 89
www.netcommwireless.com
NF3ADV
–
Dual Band W
SIP Settings
The SIP (Session Initiation Protocol) Settings
account settings provided by your VoIP Servi
Service Domain
The Service Domain page can be used to succe
setting or
have
not been supplied
information
f
needed
or not.
OPTION
SIP Account
Sele
Phone Set
Sel
WAN Interface
Sel
Display Name
Ent
User Name
Ent
Register Name
Ent
Register Password
Ent
Realm
Ent
Domain
Ent
Proxy Server
Ent
Registrar
Ent
Use Outbound server
Ena
VoI
Outbound Proxy
Ent
Status
The
WiFi Data and VoIP Gateway
s
section of the NF3ADV can be used to configure your V
ice provider.
essfully register the
SIP settings
of your VoIP account.
If
you
for a
particular field, please
contact your
VOIP service
prov
Figure 73:
VoIP/NAS View - SIP Settings - Service Domain
D
EF
I
NIT
I
O
N
ect whether you wish to configure a single VoIP account or multiple VoIP
lect which handset to use.
lect which method of connection configuration to use.
ter the display name for your VOIP service.
ter the User Name for your VOIP service.
ter the Register Name (May be called the Auth ID±) for your VOIP service.
ter the Register Password (May be called the Auth Password) for your VO
ter the Realm in use for your VOIP service.
ter the Domain for your VOIP service.
ter the Proxy Server address in use for your VOIP service.
ter the Registrar for your VOIP service.
able or Disable the use of an Outbound Proxy for VOIP calls depending o
IP account is capable of outbound calls.
ter the Outbound Proxy server address to use if required.
e current status of your VOIP service.
Table 40: VoIP/NAS View - SIP Settings - Service Domain Settings
64
NF3ADV User Guide
VoIP service with the VoIP
u are
unsure
about any specific
vider to
verify if
this setting
is
P accounts.
.
OIP service.
on whether your
Page 65 / 89
NF3ADV User Guide
65
Port Setting
The
Port Setting page
enables
you to
specify
a
connect to your
VOIP service
on.
Generally the SIP and RTP port numbers will
the port number of these protocols if advised
Codec Setting
The
Codec Setting page
enables
you to select
by your
VOIP service provider
and should not n
The following
codecs are
available
for use:
°
G.729
°
G.711 a-law
°
G.711 u-law
°
G.726 -32
a
different SIP (Session Initiation Protocol) Port
or
RTP (Real T
Figure 74: VoIP/NAS View - SIP Setting - Port setting
not need to be changed from their default values. It is re
d by your VoIP Service or Internet Service Provider.
t which audio codec to use with your
VOIP service. This inf
need to be changed
unless
you
are experiencing issues
wi
Figure 75: VoIP/NAS View - SIP Setting - Codec Setting
www.netcommwireless.com
Time Protocol)
Port number to
ecommended to only change
formation will usually
be supplied
ith
VOIP
call sound quality.

Rate

4 / 5 based on 1 vote.

Popular NetComm Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top