www.netcomm.com.au

41

NetComm NB304N – ADSL2+ Wireless N300 Modem

YML304X

Enter the following parameters:

PARAMETER

DEFINITION

Group Name

Enter a name to identify the interface group

WAN Interface used

Select which WAN interface to use for the group

Available Interfaces

Select which LAN interfaces will be used by the group

DHCP Vendor IDs

Enter specific Vendor IDs to identify devices to automatically take part in the group

Click Apply/Save to save the Interface grouping configuration settings.

IPSec

The NB304N offers IPSec VPN tunnel functionality.

To delete an IPSec entry, click the Remove checkbox next to the selected IPSec tunnel entry and click Remove.

Click Add to create a new IPSec tunnel connection.

Enter the following parameters:

PARAMETER

DEFINITION

IPSec Connection Name

Enter a name to identify the IPSec tunnel

Tunnel Mode

Select the applicable IPSec tunnel mode

Remote IPSec Gateway

Enter the IP Address of the IPSec server to connect to

Tunnel access from Local

Select which remote addresses local IPSec connections are able to access

IP Address from VPN

Enter the IP Address to be used locally for the IPSec tunnel

Subnet mask for VPN

Enter the subnet mask to be used locally for the IPSec tunnel

Tunnel Access from Remote

Select which local addresses remote IPSec connections are able to access

IP Address for VPN

Enter the IP Address to be used on the remote end for the IPSec tunnel

Subnet mask for VPN

Enter the subnet mask to be used on the remote end for the IPSec tunnel

Key Exchange Method

Select the type of IPSec exchange is to be used on the IPSec tunnel

Authentication Method

Select the applicable authentication for the IPSec tunnel

Pre-Shared Key

Enter the pre-shared key (if applicable) to grant access to the IPSec tunnel

Perfect Forward Secrecy

Select to use Perfect Forward Secrecy during key exchange for the IPSec tunnel

Advanced IKE Settings

Configure advanced IKE settings for the IPSec tunnel such as the encryption method or key life time

After entering the required IPSec tunnel service settings, click Apply/Save to save the new IPSec Tunnel configuration settings.

NETCOMM GATEWAY™ SERIES –

NB304N – ADSL2+ Wireless N300 Modem Router

42

NetComm NB304N – ADSL2+ Wireless N300 Modem

YML304X

www.netcomm.com.au

Power Management

The power management page enables you to control the green aspects of the NB304N.

You can enable or disable the power management features by selecting or unselecting the different power management functions

as necessary and then click Apply to save these settings.

www.netcomm.com.au

43

NetComm NB304N – ADSL2+ Wireless N300 Modem

YML304X

Wireless

Basic

The Wireless Basic page allows you to enable the wireless network and configure its basic settings.

The following parameters are available:

PARAMETER

DEFINITION

Enable Wireless

Select to enable or disable the wireless network function

Hide Access Point

Select to hide or display the wireless network when an SSID scan is performed

Clients Isolation

Select to prevent clients on the wireless network being able to access each other

Disable WMM Advertise

Select to prevent the NB304N advertising its WMM function

Enable Multicast Forwarding (WMF)

Select to enable Wireless Multicast Forwarding. This can reduce latency and improve throughput for wireless clients

Max Clients

Enter the maximum number of wireless clients able to connect to the wireless network

Wireless Guest Network

Select to enable a separate Wireless Guest network, the same options are available for a Guest network as with the

main system wireless network.

Click Apply/Save to save the new wireless configuration settings.

NETCOMM GATEWAY™ SERIES –

NB304N – ADSL2+ Wireless N300 Modem Router

44

NetComm NB304N – ADSL2+ Wireless N300 Modem

YML304X

www.netcomm.com.au

Security

The NB304N supports all encryptions within the 802.11 standard. The factory default is WPA2-PSK. The NB304N also supports

WPA, WPA-PSK, WPA2, WPA2-PSK. You can also select to enable WPS mode.

The following parameters are available:

PARAMETER

DEFINITION

Enable WPS

Select to enable or disable the WPS function of the NB304N.

Select SSID

Select the SSID to apply the security settings to.

Network Authentication

Select the Wireless security type to use with the wireless network.

WPA/WAPI passphrase

Enter the security key to use with the wireless network.

WPA Group Rekey Interval

Enter the group rekey interval. This should not need to changed.

WPA/WAPI Encryption

Select the type of encryption to use on the wireless network.

WEP Encryption

Select to utilise WEP encryption on the wireless network connection.

Click Apply/Save to save the new wireless security configuration settings.

MAC Filter

MAC Filter allows you to add or remove the MAC Address of devices which will be allowed or denied access to the wireless

network. Select to either allow or deny access to the MAC addresses listed.

To delete a MAC filter entry, click the Remove checkbox next to the selected filter entry and click Remove.

Click Add to add a MAC Address Filter.

Enter the MAC Address to be filtered and click Apply/Save to save the new MAC Address filter settings.

www.netcomm.com.au

45

NetComm NB304N – ADSL2+ Wireless N300 Modem

YML304X

Wireless Bridge

Wireless Bridge allows you to configure the router’s access point as a bridge.

Select the mode for the Wireless Access Point built into the NB304N. When selecting ‘Wireless Bridge’ mode, you can also specifiy

which wireless networks will be allowed to connect to the NB304N by using the ‘Bridge Restrict’ option and then entering the

applicable MAC Addresses of the other wireless access points.

Click Apply/Save to save the new wireless bridge configuration settings.

Advanced

Advanced Wireless allows you to configure detailed wireless network settings such as the band, channel, bandwidth, transmit

power and preamble settings.

Click Apply/Save to save any changes to the wireless network settings configuration.

Station Info

This page shows the MAC address of authenticated wireless stations that are connected to the NB340N and their status